Mission analysis and systems design of a near-term and far-term pole-sitter mission

This paper provides a detailed mission analysis and systems design of a near-term and far-term pole-sitter mission. The pole-sitter concept was previously introduced as a solution to the poor temporal resolution of polar observations from highly inclined, low Earth orbits and the poor high-latitude coverage from geostationary orbit. It considers a spacecraft that is continuously above either the north or south pole and, as such, can provide real-time, continuous and hemispherical coverage of the polar regions. Being on a non-Keplerian orbit, a continuous thrust is required to maintain the pole-sitter position. For this, two different propulsion strategies are proposed, which result in a near-term pole-sitter mission using solar electric propulsion (SEP) and a far-term pole-sitter mission where the SEP thruster is hybridized with a solar sail. For both propulsion strategies, minimum propellant pole-sitter orbits are designed. In order to maximize the spacecraft mass at the start of the operations phase of the mission, the transfer from Earth to the pole-sitter orbit is designed and optimized assuming either a Soyuz or an Ariane 5 launch. The maximized mass upon injection into the pole-sitter orbit is subsequently used in a detailed mass budget analysis that will allow for a trade-off between mission lifetime and payload mass capacity. Also, candidate payloads for a range of applications are investigated. Finally, transfers between north and south pole-sitter orbits are considered to overcome the limitations in observations due to the tilt of the Earth's rotational axis that causes the poles to be alternately situated in darkness. It will be shown that in some cases these transfers allow for propellant savings, enabling a further extension of the pole-sitter mission.     

Design of optimal earth pole-sitter transfers using low-thrust propulsion

Recent studies have shown the feasibility of an Earth pole-sitter mission using low-thrust propulsion. This mission concept involves a spacecraft following the Earth's polar axis to have a continuous, hemispherical view of one of the Earth's poles. Such a view will enhance future Earth observation and telecommunications for high latitude and polar regions. To assess the accessibility of the pole-sitter orbit, this paper investigates optimum Earth pole-sitter transfers employing low-thrust propulsion. A launch from low Earth orbit (LEO) by a Soyuz Fregat upper stage is assumed after which solar electric propulsion is used to transfer the spacecraft to the pole-sitter orbit. The objective is to minimize the mass in LEO for a given spacecraft mass to be inserted into the pole-sitter orbit. The results are compared with a ballistic transfer that exploits manifold-like trajectories that wind onto the pole-sitter orbit. It is shown that, with respect to the ballistic case, low-thrust propulsion can achieve significant mass savings in excess of 200 kg for a pole-sitter spacecraft of 1000 kg upon insertion. To finally obtain a full low-thrust transfer from LEO up to the pole-sitter orbit, the Fregat launch is replaced by a low-thrust, minimum time spiral, which provides further mass savings, but at the cost of an increased time of flight.     

Optimization of space orbits design for Earth orbiting missions

In Earth orbiting space missions, the orbit selection dictates the mission parameters like the ground resolution, the area coverage, and the frequency of coverage parameters. To achieve desired mission parameters, usually Earth regions of interest are identified and the spacecraft is maneuvered continuously to visit only these regions. This method is expensive, it requires a propulsion system onboard the spacecraft, working throughout the mission lifetime. It also requires a longer time to cover all the regions of interest, due to the very weak thrust forces compared to that of the Earth's gravitational field. This paper presents a methodology to design natural orbits, in which the regions of interest are visited without the use of propulsion systems, depending only on the gravitational forces. The problem is formulated as an optimization problem. A genetic algorithm along with a second order gradient method is implemented for optimization. The design process takes into consideration the gravitational second zonal harmonic, and hence allows for the design of repeated Sun-synchronous orbits. The field of view of the payload is also taken into consideration in the optimization process. Numerical results are presented that demonstrates the efficiency of the proposed method.     

Photonic spin control for solar wind electric sail

The electric solar wind sail (E-sail) is a novel, efficient propellantless propulsion concept which utilises the natural solar wind for spacecraft propulsion with the help of long centrifugally stretched charged tethers. The E-sail requires auxiliary propulsion applied to the tips of the main tethers for creating the initial angular momentum and possibly for modifying the spinrate later during flight to counteract the orbital Coriolis effect and possibly for mission specific reasons. We introduce the possibility of implementing the required auxiliary propulsion by small photonic blades (small radiation pressure solar sails). The blades would be stretched centrifugally. We look into two concepts, one with and one without auxiliary tethers. The use of small photonic sails has the benefit of providing sufficient spin modification capability for any E-sail mission while keeping the technology fully propellantless. We conclude that small photonic sails appear to be a feasible and attractive solution to E-sail spinrate control.     

Novel orbits of Mercury,Venus and Mars enabled using low-thrust propulsion

Exploration of the inner planets of the Solar System is vital to significantly enhance the understanding of the formulation of the Earth and other planets. This paper therefore considers the development of novel orbits of Mars, Mercury and Venus to enhance the opportunities for remote sensing of these planets. Continuous acceleration is used to extend the critical inclination of highly elliptical orbits at each planet and is shown to require modest thrust magnitudes. This paper also presents the extension of existing sun-synchronous orbits around Mars. However, unlike Earth and Mars, natural sun-synchronous orbits do not exist at Mercury or Venus. This research therefore also uses continuous acceleration to enable circular and elliptical sun-synchronous orbits, by ensuring that the orbit's nodal precession rate matches the planets mean orbital rate around the Sun, such that the lighting along the ground-track remains approximately constant over the mission duration. This property is useful both in terms of spacecraft design, due to the constant thermal conditions, and for comparison of images. Considerably high thrust levels are however required to enable these orbits, which are prohibitively high for orbits with inclinations around 90°. These orbits therefore require some development in electric propulsion systems before becoming feasible.     

Combining solar science and asteroid science with the space weather observation network (SWON)

The peculiarity of space weather for Earth orbiting satellites, air traffic and power grids on Earth and especially the financial and operational risks posed by damage due to space weather, underline the necessity of space weather observation. The importance of such observations is even more increasing due to the impending solar maximum. In recognition of this importance we propose a mission architecture for solar observation as an alternative to already published mission plans like Solar Probe (NASA) or Solar Orbiter (ESA). Based upon a Concurrent Evaluation session in the Concurrent Engineering Facility of the German Aerospace Center, we suggest using several spacecraft in an observation network. Instead of placing such spacecraft in a solar orbit, we propose landing on several asteroids, which are in opposition to Earth during the course of the mission and thus allow observation of the Sun's far side. Observation of the far side is especially advantageous as it improves the warning time with regard to solar events by about 2 weeks. Landing on Inner Earth Object (IEO) asteroids for observation of the Sun has several benefits over traditional mission architectures. Exploiting shadowing effects of the asteroids reduces thermal stress on the spacecraft, while it is possible to approach the Sun closer than with an orbiter. The closeness to the Sun improves observation quality and solar power generation, which is intended to be achieved with a solar dynamic system. Furthermore landers can execute experiments and measurements with regard to asteroid science, further increasing the scientific output of such a mission. Placing the spacecraft in a network would also benefit the communication contact times of the network and Earth. Concluding we present a first draft of a spacecraft layout, mission objectives and requirements as well as an initial mission analysis calculation.     

Station keeping of a solar sail around a Halo orbit

Solar sails are a concept of spacecraft propulsion that takes advantage of solar radiation pressure to propel a spacecraft. Although the thrust provided by a solar sail is small it is constant and unlimited. This offers the chance to deal with novel mission concept. In this work we want to discuss the controllability of a spacecraft around a Halo orbit by means of a solar sail. We will describe the natural dynamics for a solar sail around a Halo orbit. By natural dynamics we mean the behaviour of the trajectory of a solar sail when no control on the sail orientation is applied. We will then discuss how a sequence of changes on the sail orientation will affects the sail's trajectory, and we will use this information to derive efficient station keeping strategies. Finally we will check the robustness of these strategies including different sources of errors in our simulations.     

Optimization of the trajectory of the spacecraft insertion into the system of heliocentric orbits

The possibility of the spacecraft insertion into the system of operational heliocentric orbits has been analyzed. It has been proposed to use a system of several operational heliocentric orbits. On each orbit, the spacecraft makes one or more revolutions around the Sun. These orbits are characterized by a relatively small perihelion radius and relatively high inclination, which allows one to investigate the polar regions of the Sun. The transition of the spacecraft from one orbit to another has been performed using an unpowered gravity assist maneuver near Venus and does not require the cruise propulsion operation. Each maneuver transfers the spacecraft into the sequence of operational heliocentric orbits. We have analyzed several systems of operational heliocentric orbits into which the spacecraft can be inserted by means of the considered transportation system with electric propulsion (EP). The mass of the spacecraft delivered to these systems of operational orbits has been estimated.     

太阳帆绕地球周期轨道研究

  地球同步和太阳同步卫星在各个领域有着广泛的应用。静止轨道是一种特殊的地球同步轨道,轨道资源有限。利用化学推进或电推进可以实现轨道高度不同的同步轨道,如悬挂轨道,但需要消耗较多的燃料,工程上无法承受。本文考虑利用太阳帆实现地球同步和太阳同步轨道。太阳光压力在轨道平面内沿拱线方向,选择光压力与平面的夹角使得轨道平面的旋转速率与太阳光同步。研究表明,设计合适的半长轴和偏心率可以使得轨道旋转速率与地球自转速率一致。假设太阳光与赤道平面平行,可以得到准静止轨道,太阳帆将在传统静止轨道的附近运动,星下点的经度将在一个固定值附近振动。实际上太阳光是与黄道面平行,黄道面与赤道面之间存在夹角。考虑黄赤交角的情况下,太阳帆将在一定纬度和经度范围内运动。适合于对某个区域进行长期观测任务。     

Erdbeobachtende missionen—Anforderungen und konzepte

(Earth Observation Missions—Requirements and Concepts)—Ten years ago, on 23 July 1972. NASA launched the first satellite specifically designed for Earth observation. With Landsat 1 the importance and attractiveness of remote sensing from space increased worldwide.The paper presents in an overview former remote sensing missions with their applications and the system elements required for gathering Earth observation information. Main elements are the sensors (optical, microwave, and other instruments), the platforms (satellites, space stations, aircraft and Earth based stations) and their orbits.It is shown how these elements are interrelated and which constraints must be considered for planning an Earth observation mission. The feasibility, the amount of hard- and software, the costs, and the performance of a system are decisive for the realization of a satellite concept.Examples for different concepts investigated to date at Dornier System are given; included is the first ESA Remote Sensing Satellite ERS-1, which is now under definition at Dornier System, the main contractor of ESA.     

NanoSail-D: A solar sail demonstration mission

In the early to mid-2000s, NASA made substantial progress in the development of solar sail propulsion systems. Solar sail propulsion uses the solar radiation pressure exerted by the momentum transfer of reflected photons to generate a net force on a spacecraft. To date, solar sail propulsion systems were designed for large robotic spacecraft. Recently, however, NASA has been investigating the application of solar sails for small satellite propulsion. The NanoSail-D is a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board the ill-fated Falcon Rocket launched August 2, 2008, and due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare is ready for flight and a suitable launch arrangement is being actively pursued. This paper will present an introduction solar sail propulsion systems and an overview of the NanoSail-D spacecraft.     

The deep space 1 extended mission

The primary mission of Deep Space 1 (DS1), the first flight of the New Millennium program, completed successfully in September 1999, having exceeded its objectives of testing new, high-risk technologies important for future space and Earth science missions. DS1 is now in its extended mission, with plans to take advantage of the advanced technologies, including solar electric propulsion, to conduct an encounter with comet 19P/Borrelly in September 2001. During the extended mission, the spacecraft's commercial star tracker failed; this critical loss prevented the spacecraft from achieving three-axis attitude control or knowledge. A two-phase approach to recovering the mission was undertaken. The first involved devising a new method of pointing the high-gain antenna to Earth using the radio signal received at the Deep Space Network as an indicator of spacecraft attitude. The second was the development of new flight software that allowed the spacecraft to return to three-axis operation without substantial ground assistance. The principal new feature of this software is the use of the science camera as an attitude sensor. The differences between the science camera and the star tracker have important implications not only for the design of the new software but also for the methods of operating the spacecraft and conducting the mission. The ambitious rescue was fully successful, and the extended mission is back on track.     

Optimal control laws for heliocentric transfers with a magnetic sail

A magnetic sail is an advanced propellantless propulsion system that uses the interaction between the solar wind and an artificial magnetic field generated by the spacecraft, to produce a propulsive thrust in interplanetary space. The aim of this paper is to collect the available experimental data, and the simulation results, to develop a simplified mathematical model that describes the propulsive acceleration of a magnetic sail, in an analytical form, for mission analysis purposes. Such a mathematical model is then used for estimating the performance of a magnetic sail-based spacecraft in a two-dimensional, minimum time, deep space mission scenario. In particular, optimal and locally optimal steering laws are derived using an indirect approach. The obtained results are then applied to a mission analysis involving both an optimal Earth–Venus (circle-to-circle) interplanetary transfer, and a locally optimal Solar System escape trajectory. For example, assuming a characteristic acceleration of 1 mm/s², an optimal Earth–Venus transfer may be completed within about 380 days.     

Nitrous oxide as a rocket propellant

Nitrous oxide is introduced as a multi-purpose propellant for spacecraft. Potential space applications of this propellant are given. Based on comparison to conventional systems, a multi-mode nitrous oxide propulsion concept is expected to deliver higher performance. Main features of a self-pressurising, nitrous oxide storage system are described. A nitrous oxide catalytic decomposition technique is suggested for restartable spacecraft propulsion. Up-to-date experimental results are presented. A conclusion describes the long-term feasibility of novel nitrous oxide propulsion option concepts.     

Single crystal mo solar thermal thruster for microsatellites

One potentially attractive propulsion concept offering significant payload gains for orbit transfer from LEO to higher orbits, station keeping and attitude control of spacecraft is thermal propulsion using light gas (typically hydrogen) as propellant and various kinds of heat energy. Solar Thermal Propulsion (STP) is a typical thermal propulsion with high Isp (500 – 1,000 s) in an appropriate thrust magnitude range and provides possibly much less space pollution than conventional chemical propulsion.

This paper presents the test results of a 30 mm dia. (medium-sized) windowless type of single crystal Mo thruster for orbit transfer of 50 kg class microsatellites. The cavity dia. is 20 mm, double the size of the previous model, and can apply to a primary solar reflector of up to 3.5 m dia., which is the maximum size containable in the H-II rocket fairing without segmentation. The performed mission analyses indicate that this size of STP is suitable to orbit transfer of 50 kg class microsatellites, such as LEO to GEO, or only multiple apogee kicks from GTO to GEO or deep space missions.     

Spacecraft Injection into a Heliocentric Terrestrial Orbit

We consider the problem of injection of a spacecraft into the heliocentric Earth's orbit ahead and/or behind the Earth by 60° and 120° in heliographic longitude. The range of solar and astrophysical problems for which these orbits are necessary is reviewed. The variants of injection into heliocentric orbits work from a low around-Earth orbit with one turn-on of the engine in this orbit and one turn-on at the end of the injection trajectory. In this case, it turns out to be more profitable to put spacecraft into orbit for three or even four revolutions of the Earth about the Sun. The velocities necessary for the start from a low around-Earth orbit, the velocities at the final point of injection, and the fuel mass (relative to the spacecraft mass) necessary for injection are estimated. The problems for which injection to similar orbits is executed, using the low-thrust engine and with a combined regime of injection, are also considered.     

太阳帆航天器姿态控制技术综述

太阳帆作为一种无工质消耗的新型航天器推进技术,逐渐受到国内外航天界的广泛关注。文章首先综述了太阳帆航天器控制技术的发展现状,重点分析了太阳帆航天器姿态控制技术的特点和难点;其次,按照执行机构的不同,分别介绍了近年来国内外航天领域提出的多种太阳帆航天器姿态控制方案,针对各个方案的优缺点加以分析;最后,对该领域未来的发展前景进行了展望。     

Electric transfer optimization for mars sample return mission

The aim of this paper is to analyse an alternative scenario for Mars Sample Return Orbiter mission, where electric propulsion is used for Earth-Mars and Mars-Earth heliocentric cruises and for Mars orbit insertion / escape transfers, whereas chemical propulsion is used for final Mars rendezvous. The problem consists in minimizing the initial vehicle mass to obtain a specific final dry mass in reasonable time. The planetocentric phases correspond to continuous low-thrust trajectories, spiraling around Mars between a low orbit and the influence sphere altitude. The heliocentric phases consist of a succession of low-thrust and coasting arcs with specific departure and arrival conditions at the Earth. For these two types of transfer, efficient optimal control tools exist based on Pontryagin's maximum principle. Thanks to the coordination between planetocentric and heliocentric phases, the solution obtained with these two separate tools gives a good upper bound of the optimal solution in terms of propellant consumption and duration. This optimization procedure is described and finally applied to the proposed mission. The numerical results are presented and compared with the baseline chemical mission solution. The electric option could allow to decrease the spacecraft departure mass but may lead to rather long mission duration.     

欧空局今后十年空间探测战略

欧空局目前正在研究今后十年的空间探测任务,这些任务可以分为两大类,一类是具有研究性的地球探测任务,另一类是可供使用的地球观察任务。这些研究要求的卫星质量不同,小的不足1000kg,大的可达3000kg;功率不同,小的不到500W,大的超过1500W;轨道高度也不同,从500km到800km。除降雨量观测任务由于飞行器结构和系统的限制是在低倾角轨道上执行外,其他大部分任务将在太阳同步轨道上执行。     

Optimal interplanetary rendezvous combining electric sail and high thrust propulsion system

The aim of this paper is to study, from a mission analysis point of view, the performance of a hybrid propulsion concept for a two-dimensional transfer towards a planet of the Solar System. The propulsion system is obtained by combining a chemical thruster, used for the phases of Earth escape and/or target planet capture, with an electric sail, which provides a continuous thrust during the heliocentric transfer. Two possible mission scenarios are investigated: in the first case the sailcraft reaches the target planet with zero hyperbolic excess velocity, thus performing a classical rendezvous mission in a heliocentric framework. In the second mission scenario, a given final hyperbolic excess velocity relative to the planet is tolerated in order to decrease the mission flight time. The amount of final hyperbolic excess velocity is used as a simulation parameter for a tradeoff study in which the minimum flight time is related to the total velocity variation required by the chemical thruster to accomplish the mission, that is, for Earth escape and planetary capture.