基于WINDOWS环境POP3协议邮件接收客户端的实现

Internet的电子邮件服务系统采用SMTP、POP、IMAP等应用协议。文章以POP3协议为研究对象，在Visual C＋＋ 6．0编程环境下应用POP3协议，通过套接字发送POP3命令，接收并处理邮件服务器的反馈信息，从而在客户端实现对电子邮件的接收。文章详细讨论了POP3协议的实现过程、操作、状态以及在发送POP3和接收POP3之间的会话及应答过程。软件采用面向对象，消息驱动及多线程等新技术实现系统中的功能。     

某型飞机铁鸟液压试验自动控制系统的实现

基于计算机远程控制技术和虚拟仪器技术,通过LXI设备及调理电路、转向/刹车动作模拟器等现场执行控制装置,代替真实飞机控制组件发送信号,使系统按预先设好的序列动作;通过高速以太网和反射内存网,将被试系统和试验设备纳入试验闭环网络,实现远程自动控制.经应用证明,该系统控制精确可靠,人机交互良好,支持了该型号飞机的液压系统铁鸟试验.     

某型空空导弹雷达导引头高频器件故障分析及处理

空空导弹中的高频电子组件主要用于雷达导引头或引信,其产生高频探测信号并通过发送探测信号来获取目标信息。本文主要针对某型空空导弹雷达引信部分的耿氏振荡器进行原理介绍和故障分析。     

航天器整体式多组件结构拓扑优化设计与应用

<正>本文以航天器多组件结构系统设计为例,介绍了近年来拓扑优化技术在航天器多组件结构系统设计中的工程应用情况,并对其发展前景进行展望。文中选择了国内外两个代表性设计进行了详细分析,以作为具体航空航天多组件结构系统设计的参考和对照。     

组件的标识与管理

基于组件的编程是软件开发中公认的快速构建应用程序的方法,但关于组件的技术和非技术方面还存在着许多问题。首先介绍了组件标识问题,即如何用相关信息来充分描述组件,然后介绍了SCM(软件配置管理)对组件的管理以及组件间依赖性的管理。     

基于延迟发送的高速信号遥测采编技术

针对导弹与目标相遇时刻引信产生的高速信号的数据分析需求,提出了一种基于延迟发送的遥测采编技术。数据采集采用了缓存后延迟发送的方式,在所需信号的特征未满足发送要求前,对数据通道持续检测,并将采集到的数据缓存入RAM(Random Access Memory,随机存取存储器)中,此时发送其余信号的遥测数据;当所需信号满足发送要求后,立即中断其余信号的发送,将RAM中存储的数据读出并发送:这样不仅降低了系统码速率,还可以避免高码速率实时发送带来的不利影响。数据编码采用了分层量化的方式,提高了数据分析时较为关注的小幅度信号的分辨率。该遥测采编技术方案具有缩短研制周期、节约研制成本、降低技术风险的优点,并在飞行试验中得到成功应用。     

基于多电技术的民用飞机舱门电作动器研究

目前国内多电技术的工程应用较少,基于此,以舱门电作动器为例,分析了其技术要求,从No-Back和软硬件设计技术两方面对设计难点进行了研究,然后对电机组件、齿轮装置、控制组件、控制板、作动器控制算法进行了系统设计,并完成样件试验。结果表明,样件满足设计要求和功能要求。     

JMASS环境下的飞行仿真组件集成研究

简要介绍了联合建模与仿真系统(JMASS)的基本概念,分析了JMASS的结构和组成。进一步以一个飞行仿真组件的集成为实例,阐述了如何进行基于JMASS仿真环境的仿真子系统开发,特别研究了如何给已有仿真组件增加设计专门针对JMASS环境而的接口的技术,使现有组件能够顺利集成到JMASS环境下,并使之正确运行。     

组件技术与软件体系结构

软件开发是一项十分具有创造性的工作,其中,包含了诸多的原理、技术和思想。组件技术就是其中的一个。它的提出根植于面向对象的原理,它不仅为广大程序员提供了更为广阔的空间,同时也对传统的软件体系结构提出了挑战,为将来的软件开发与软件工程技术提供了良好的技术支持。本文介绍了软件开发的历史演变,以及传统软件开发过程的弊端。同时介绍了组件技术产生的市场以及技术需求,阐述了组件技术的基本原理和特点,最后着重于组件技术在当今软件体系结构方面的应用。     

基于组件的制造执行系统的应用开发

针对现有制造执行系统缺乏适应性、集成性、不易重构等缺点,提出了适合离散制造业的制造执行系统功能模型组件。结合软件组件技术、CORBA体系结构,提出了基于组件的开发方法,并系统地论述了制造执行系统组件的开发过程。     

ν-gap度量及其在飞行控制律评估中的应用

 传统控制律评估方法主要用于单输入单输出（SISO）系统，且对模型参数摄动考虑不够全面,针对这些不足，研究了ν-gap度量方法。在介绍系统广义稳定裕度相关概念的基础上，给出了ν-gap度量的定义、特点和性质以及近似摄动模型的计算，提出ν-gap度量评估控制律的步骤。实例结果表明，该方法不仅克服了上述传统评估方法的缺陷，而且还有根据所求的各摄动影响情况忽略影响小的元素，以减少计算量及可以找到最坏情况下的参数摄动组合等优点。     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.     

基于飞机油箱模型形状特征油量测量切片步长选择方法研究

 在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明：该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

二维翼段颤振的μ控制

 采用超声电机作为作动器来实现含控制面的翼段颤振鲁棒抑制。针对作者设计的二维翼段颤振主动抑制系统，通过理论与实验相结合的方法，建立了考虑沉浮方向阻尼和作动器模型参数不确定性的控制系统模型，设计了μ控制器，并对控制器做了降阶处理。数值仿真和风洞试验表明，μ控制器可有效地抑制颤振的发生，将颤振临界速度提高23.4%。相对于H_∞控制器，μ控制器的控制效果和鲁棒性更好。     

航空发动机管路测量数据分割方法

 为了提高航空发动机管路测量数据的反求建模效率,提出了一种区域增长分割算法。该方法主要是利用管路表面在曲面索引系数映射、主曲率映射、高斯映射上的特性,并基于均值漂移算法和遗传算法提出了区域分割算法中种子区域的选择策略。然后利用区域增长分割方法实现了对管路测量数据的分割。经过仿真和实测数据验证,所提管路分割算法具有较好的分割质量和效率。     

Abnormal Shape Mould Winding

为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。     

Interfacial Properties Modification of Carbon Fiber/ Polyarylacetylene Composites

This work was dedicated to performing surface oxidation and coating treatments on carbon fibers (CF) and investigating the changes of fiber surface properties after these treatments, including surface composition, relative volume of functional groups, and sur- face topography with X-ray photoelectron spectroscopy (XPS) and atom force microscopy (AFM) technology. The results show that, after oxidation treatments, interfacial properties between CF and non-polar polyarylacetylene (PAA) resin are remarkably modified by removing weak surface layers and increasing fiber surface roughness. Coating treatment by high char phenolic resin solution after oxida- tion makes interface of CF/PAA composites to be upgraded and the interfacial properties further bettered.     

Thermal Stresses and Cracks During the Growth of Large-sized Sapphire with SAPMAC Method

本文利用有限元法对冷心放肩微量提拉法(SAPMAC)生长大尺寸蓝宝石单晶过程中的热应力进行了模拟计算,应用临界缺陷理论解释了裂纹的萌生与扩展机理。研究表明,晶体内的热应力主要与晶体生长速率,环境温度和结晶取向有关;较大热应力多出现在结晶界面,放肩、收尾以及直径急剧变化等位置;最大热应力总是出现在籽晶与新生晶体的界面附近。裂纹将在临界缺陷位置产生,并在应力作用下沿a或m面扩展。计算结果与实验结果基本吻合,通过晶体生长系统和生长工艺的改进,对晶体的开裂问题得到了有效的抑制。     

Optimization Design System for Composite Structures Based on Grid Technology

To solve the topology optimization of complicated multi-objective continuous/discrete design variables in aircmit structure design, a Parallel Pareto Genetic Algorithm （PPGA） is presented based on grid platform in this paper. In the algorithm, the commercial finite element analysis （FEA） software is integrated as the calculating tool for analyzing the objective functions and the filter of Pareto solution set based on weight information is introduced to deal with the relationships among all objectives. Grid technology is utilized in PPGA to realize the distributed computations and the user interface is developed to realize the job submission and job management locally/remotely. Taking the aero-elastic tailoring of a composite wing for optimization as an example, a set of Pareto solutions are obtained for the decision-maker. The numerical results show that the aileron reversal problem can be solved by adding the limited skin weight in this system. The algorithm can be used to solve complicated topology optimization for composite structures in engineering and the computation efficiency can be improved greatly by using the grid platform that aggregates numerous idle resources.