Radioisotope powered AMTEC systems

Alkali Metal Thermal to Electric Converter (AMTEC) systems are being developed for high performance spacecraft power systems, including small, General Purpose Heat Source (GPHS) powered systems. Several design concepts have been evaluated for the power range from 75 W to 1 kW. The specific power for these concepts has been found to be as high as 18-20 W/kg and 22 kW/m³. The projected area, including radiators, has been as low as 0.4 m²/kW. AMTEC power systems are extremely attractive, relative to other current and projected power systems, because AMTEC offers high power density, low projected area, and low volume. Two AMTEC cell design types have been identified. A single-tube cell is already under development and a multi-tube cell design, to provide additional power system gains, has undergone proof-of-principle testing. Solar powered AMTEC (SAMTEC) systems are also being developed, and numerous terrestrial applications have been identified for which the same basic AMTEC cells being developed for radioisotope systems are also suitable     

Integration of Large Power Systems into Manned Space Stations

Essential design factors and system characteristics are explored for integration of large power systems into manned space stations. The impact of the type of power system selected upon the space station is outlined, as is the impact of the mission requirements upon the selection of power systems. Criteria for resolving the selection/application/ integration problems are provided. Comparisons between systems are based on recently defined space-station models for 90-day to five-year mission durations in the 1970' s, with four-to nine-man crews. Power systems encompass power levels from 3 to 50 kWe and include solar cell/battery. fuel cell, hybrid fuel cell/solar cell, radioisotope, and nuclear reactor systems. Thermoelectric, Brayton cycle, organic Rankine, and liquid-metal Rankine power conversion systems are considered for the nuclear energy sources. Both rigid and roll-out photovoltaic array configurations are analyzed with respect to the solar energy source.     

Thermionic/AMTEC cascade converter concept for high-efficiencyspace power

This paper presents trade studies that address the use of the thermionic/AMTEC cell-a cascaded, high efficiency, static power conversion concept that appears well-suited to space power applications. Both the thermionic and AMTEC power conversion approaches have been shown to be promising candidates for space power. Thermionics offers system compactness via modest efficiency at high heat rejection temperatures, and AMTEC offers high efficiency at modest heat rejection temperature. From a thermal viewpoint, the two are ideally suited for cascaded power conversion: thermionic heat rejection and AMTEC heat source temperatures are essentially the same. In addition to realizing conversion efficiencies potentially as high as 35-40% such a cascade offers the following perceived benefits: Survivability-capable of operation in the Van Allen belts; Simplicity-static conversion, no moving parts; Long lifetime-no inherent life-limiting mechanisms identified; Technology readiness-Large thermionic database; AMTEC efficiencies of 18% currently being demonstrated, with more growth potential available; and Technology growth-applicable to both solar thermal and reactor-based nuclear space power systems. Mechanical approaches and thermal/electric matching criteria for integrating thermionics and AMTEC into a single conversion device are described. Focusing primarily on solar thermal space power applications, parametric trends are presented to show the performance and cost potential that should be achievable with present-day technology in cascaded thermionic/AMTEC systems     

Electrical power on a 30 kW space-based radar satellite

An electrical power system for a space-based radar satellite is described. When the radar is on, its transmitter needs an average DC power of 30 kW. The problem of distributing the power efficiently in pulses to many transmit/receive modules is addressed. System requirements include a high-voltage battery and transmission line, load-sharing between the solar array, and the battery during sunlit periods, and a 25-kW solar array. A scaled-down version of the power system for a proof-of-concept demonstration is described     

Computer Simulation of Satellite Electric Power Systems

A computer program concept is described for performing an electrical analysis and a transient thermal analysis of a satellite electric power subsystem consisting of a solar array, battery, and power controls. The program "flies" the power subsystem and certain thermally sensitive portions of the spacecraft through one or more complete orbits, and plots curves of voltages, currents, temperatures, and energy balance in critical parts of the power and thermal subsystems.     

Radioisotope AMTEC power system designs for spacecraft applications

The authors describe and compare small (two-module) and larger (16-module) AMTEC (alkali metal thermal-to-electric converter) radioisotope powered systems and describe the computer model developed to predict their performance. The high efficiency and static conversion process combined with minimized parasitic losses and operating temperatures that allow the use of current materials while still maintaining a competitive radiator area are found to make AMTEC an excellent candidate for enhanced performance space power systems. AMTEC has the capability of reducing mission costs relative to other static conversion systems because of its high efficiency. AMTEC can also reduce cost relative to dynamic systems simply by being less massive (10 to 5000 W level), and its use eliminates the torque and vibration issues of dynamic systems     

Deep space travel energy sources

Exploration of the planets beyond Mars and their surroundings is already planned. Astronomy researchers are citing important information that can be obtained with instrumented spacecraft that fly beyond the planets of our solar system. Spacecraft flying these missions need power for performing their functions and communicating with Earth stations. Sunlight in these zones is so weak that alternative energy sources are needed. An alternative power source for deep-space missions is radioisotope heated energy converters.. The choice of heat-to-electric power conversion is narrowing to: 1) the Stirling engine; and 2) a combined cycle with thermionic and alkali-metal thermoelectric (AMTEC) heat-to-electricity conversion. For propulsion into deep space, a nuclear-reactor-heated AMTEC energy converter that powers ion engines can become the best alternative to hoisting tons of rockets into Earth orbit.     

The New Horizons Spacecraft

The New Horizons spacecraft was launched on 19 January 2006. The spacecraft was designed to provide a platform for seven instruments designated by the science team to collect and return data from Pluto in 2015. The design meets the requirements established by the National Aeronautics and Space Administration (NASA) Announcement of Opportunity AO-OSS-01. The design drew on heritage from previous missions developed at The Johns Hopkins University Applied Physics Laboratory (APL) and other missions such as Ulysses. The trajectory design imposed constraints on mass and structural strength to meet the high launch acceleration consistent with meeting the AO requirement of returning data prior to the year 2020. The spacecraft subsystems were designed to meet tight resource allocations (mass and power) yet provide the necessary control and data handling finesse to support data collection and return when the one-way light time during the Pluto fly-by is 4.5 hours. Missions to the outer regions of the solar system (where the solar irradiance is 1/1000 of the level near the Earth) require a radioisotope thermoelectric generator (RTG) to supply electrical power. One RTG was available for use by New Horizons. To accommodate this constraint, the spacecraft electronics were designed to operate on approximately 200 W. The travel time to Pluto put additional demands on system reliability. Only after a flight time of approximately 10 years would the desired data be collected and returned to Earth. This represents the longest flight duration prior to the return of primary science data for any mission by NASA. The spacecraft system architecture provides sufficient redundancy to meet this requirement with a probability of mission success of greater than 0.85. The spacecraft is now on its way to Pluto, with an arrival date of 14 July 2015. Initial in-flight tests have verified that the spacecraft will meet the design requirements.     

Hubble Space Telescope at twelve years of age

The Hubble Space Telescope was deployed from the Space Shuttle Discovery into a 380-mile high Earth orbit on April 25, 1990. It subsequently made outstanding astronomical discoveries with its 8-foot (2.4-meter) telescope and other scientific instruments. Critical to the successful observations was continuous availability of power from its solar arrays during sunlit periods, and from nickel-hydrogen batteries when the satellite was in the Earth's shadow. The adopted nickel-hydrogen batteries were carefully selected and tested to confirm their depth-of-discharge and operating temperature that delivered the longest life in charge/discharge cycling service. These batteries had a design life of 7 years. At 12 years after launch the Hubble batteries have delivered more charge/discharge cycles than any other batteries in low-Earth orbit. However, the Hubble batteries have been subjected to many unexpected stresses, and peculiar reductions in battery capacity have been observed. Battery replacement requires a costly trip to the Hubble Space Telescope by astronauts, so the remaining useful life of the batteries must be predicted. Already in four servicing missions, astronauts have replaced or modified optics, solar arrays, a power control unit, and various science packages. A fifth servicing mission is scheduled in 2004. This paper discusses battery charging hardware and software controls, history of battery events in Hubble, cell performance model and spare battery tests, and capacity walkdown.     

Large-signal stability analysis of solar array power system

A large-signal stability analysis of the solar array regulator system is performed to facilitate the design and analysis of a low-earth-orbit (LEO) satellite power system. The effective load characteristics of various control methods in the solar array regulator system, such as the constant power load, variable power load, constant voltage load, constant current load, and constant resistive load, are classified to analyze the large-signal stability. Then, using the state plane analysis technique, the large-signal behavior of the solar array system is portrayed and the stability of various equilibrium points is analyzed. Thus, this approach can be contributed to organize the optimal controller structure of the system by representing the relationship between the control method of the solar array regulator and the large-signal stability. For the verification of the proposed large-signal analysis, a solar array regulator system that consists of two 100 W parallel module buck converters has been built and tested using a real 200 W solar array.     

小卫星/小运载可重构多核计算机设计

通过共用小卫星与小运载的电子系统,能够降低卫星发射成本、实现卫星与运载的快速集成及测试、减少卫星的发射与入轨时间,从而达到快速响应自然灾害等突发事件的目的。传统航天器电子系统难以兼顾运载段任务的高实时性和在轨段任务的高可靠性要求,因此本文将多核处理器技术、可重构技术和航天器电子系统设计相结合,提出了基于可重构技术的小卫星/小运载多核计算机设计方案。该设计方案分为运载和在轨两种工作模式,通过现场可编程门阵列(FPGA)的快速重构来实现计算机两种工作模式的快速切换。其中运载模式将FPGA配置成并行构架的三核处理器,通过3个处理器并行计算来提升计算机的处理能力;在轨模式将FPGA配置成冗余构架的三核处理器,通过3个处理器互为冗余备份来提升计算机的长期可靠性。经过基于Markov过程理论的系统可靠性分析,表明系统在轨段的长期可靠性得到显著提升。同时经过地面半物理仿真系统仿真测试,运载段的控制周期可以达到10ms,满足运载段任务的实时性要求。     

Orbital and Attitude Prediction Accuracy Requirements for Satellites

This paper examines the criteria for selecting the orbital and attitude prediction accuracy requirements for communications satellites. The accuracy requirements have been analyzed in terms of the various space operations involved, e.g., satellite acquisition, guidance and control, communications, telemetry, and command. It is hoped that the findings of this investigation will prove useful in satellite mission planning and design, thereby facilitating a judicious choice of the various satellite and ground components of the related subsystems.     

Parametric cost model for solar space power and DIPS systems

A detailed cost model has been developed to parametrically determine the program development and production cost of photovoltaic, solar dynamic, and dynamic isotope (DIPS) space power systems. The model is applicable in the net electrical power range of 3 to 300 kWe for solar power and 0.5 to 10 kWe for DIPS. Application of the cost model allows spacecraft or space-based power system architecture and design trade studies or budgetary forecasting and cost benefit analyses. The cost model considers all major power subsystems (i.e., power generation, power conversion, energy storage, thermal management, and power management/distribution/control). It also considers system cost effects such as integration, testing, and management. The cost breakdown structure, model assumptions, ground rules, bases, cost estimation relationship format, and rationale are presented, and the application of the cost model to 100-kWe solar space power plants and to a 1.0-kWe DIPS is demonstrated     

AMTEC cells challenge energy converters

Sodium-base alkali-metal-thermal-to-electric conversion (AMTEC) cells have been receiving attention. Recently they were selected for the next generation deep-space missions, which need a converter that makes electricity from radioisotope heat. The AMTEC cell, being an electrochemical converter of heat to electricity, has no moving parts and is not limited to Carnot-cycle efficiency. However, its heat source and sink have to be near each other, so the challenge in AMTEC design is to minimize thermal losses and maximize electricity production. This required clever thermal designs. By 1991, high-temperature materials and computer modeling became available. The important AMTEC application was generating power from radioisotope heat in deep space missions. These spacecraft power needs had previously been supplied by inefficient thermoelectric converters     

Design and testing of spacecraft power systems using VTB

A study is presented on the design and testing of spacecraft power systems using the virtual test bed (VTB). The interdisciplinary components such as solar array and battery systems were first modeled in native VTB format and validated by experiment data. The shunt regulator and battery charge controller were designed in Simulink according to the system requirements and imported to VTB. Two spacecraft power systems were then designed and tested together with the control systems.     

Self-Adapting dc Converter for Solar Spacecraft Power Supply Selbstanpassender Gleichstromwandler für die Energieversorgung eines Sonnensatelliten

The voltage-current characteristic of solar cells that provide power for a spacecraft can vary over a wide range. For maximum power transfer from the solar cells to the battery system a power converter has to be designed that adjusts its input impedance to a value equal to the output impedance determined by the operating power characteristic of the solar cells. This paper discusses a circuit and calculations for a design to match this condition. The proposed power converter is simple, lightweight, and reliable and will be used in the Sunblazer satellite.     

Spacecraft design considerations for small satellite remote sensing

The idea of adapting existing small satellite technology for remote sensing purposes is discussed. The major design problems and constraints influencing the design of a small low-cost remote sensing satellite bus are identified using the subsystem approach. Key design areas include the improvement of battery technology and the development of a deployable solar array, attitude control assemblies, on-board data processing/storage, and ground station data acquisition. Although the eventual satellite would also have to be somewhat larger, more powerful and, above all, more sophisticated than the previous small satellites, this is considered to be a natural progression of research in this area     

Low cost guidance for the Multiple Launch Rocket System (MLRS)artillery rocket

The US Army Aviation and Missile Command has demonstrated the application of advanced technology to significantly improve the accuracy and range of the Multiple Launch Rocket System (MLRS) through the Guided MLRS Advanced Technology Demonstration (ATD). The addition of a cost-effective guidance and control package to the rocket results in a weapon system that can defeat the target at ranges up to 70 km with significantly fewer rounds. This not only increases the destructive capability of the system but also reduces the cost of the expended ammunition, the cost to transport the ammunition to the combat zone, and the number of launchers required to execute the mission. The guidance kit is housed in the nose of the MLRS and consists of an Inertial Measurement Unit (IMU), four independent electromechanically actuated canards, a GPS receiver, GPS antennas, a thermal battery, a guidance computer, and power supply electronics. Roll decoupling of the warhead and motor section was required to allow roll control of the guidance section to enable accurate inertial navigation and was accomplished by joining the two sections with a roll bearing. Five flight missiles were built and tested during the ATD. A tightly coupled eight channel GPS receiver was flown on all flights. This paper discusses the ATD development effort and presents flight test results     

Low cost satellite ground control facility design

A design approach common to the areas of satellite operations command and control, tracking, subsystem analysis, system planning and scheduling, orbit determination and maintenance, and data routing and control is discussed. Specific satellite mission applications and operations are isolated from the remainder of the design to allow application to a broad variety of satellite systems. Discussions of specific satellite missions are limited to the context of understanding the general magnitude and scope of what a ground control facility is required to support. By isolating the common satellite operational functions, a low cost generic approach that allows for phased implementation of system changes with minimal impact to on-orbit assets and mission performance is developed. The goals of this approach are to provide the capability for growth, maintainability, and operability of the satellite system. A brief discussion of satellite systems followed by the introduction of the general function of any satellite control facility sets the stage for the overall design approach. The factors that define the design along with the key design features are presented, with a discussion of each product available in each functional area     

Solar power system options for the Radiation and TechnologyDemonstration spacecraft

The Radiation and Technology Demonstration (RTD) Mission has the primary objective of demonstrating high-power (10 kilowatts) electric thruster technologies in Earth orbit. This paper discusses the conceptual design of the RTD spacecraft photovoltaic (PV) power system and mission performance analyses. These power system studies assessed multiple options for PV arrays, battery technologies and bus voltage levels. To quantify performance attributes of these power system options, a dedicated Fortran code was developed to predict power system performance and estimate system mass. The low-thrust mission trajectory was analyzed and important Earth orbital environments were modeled. Baseline power system design options are recommended on the basis of performance, mass and risk/complexity. Important findings from parametric studies are discussed and the resulting impacts to the spacecraft design and cost