AMTEC cells challenge energy converters

Sodium-base alkali-metal-thermal-to-electric conversion (AMTEC) cells have been receiving attention. Recently they were selected for the next generation deep-space missions, which need a converter that makes electricity from radioisotope heat. The AMTEC cell, being an electrochemical converter of heat to electricity, has no moving parts and is not limited to Carnot-cycle efficiency. However, its heat source and sink have to be near each other, so the challenge in AMTEC design is to minimize thermal losses and maximize electricity production. This required clever thermal designs. By 1991, high-temperature materials and computer modeling became available. The important AMTEC application was generating power from radioisotope heat in deep space missions. These spacecraft power needs had previously been supplied by inefficient thermoelectric converters     

Thermionic/AMTEC cascade converter concept for high-efficiencyspace power

This paper presents trade studies that address the use of the thermionic/AMTEC cell-a cascaded, high efficiency, static power conversion concept that appears well-suited to space power applications. Both the thermionic and AMTEC power conversion approaches have been shown to be promising candidates for space power. Thermionics offers system compactness via modest efficiency at high heat rejection temperatures, and AMTEC offers high efficiency at modest heat rejection temperature. From a thermal viewpoint, the two are ideally suited for cascaded power conversion: thermionic heat rejection and AMTEC heat source temperatures are essentially the same. In addition to realizing conversion efficiencies potentially as high as 35-40% such a cascade offers the following perceived benefits: Survivability-capable of operation in the Van Allen belts; Simplicity-static conversion, no moving parts; Long lifetime-no inherent life-limiting mechanisms identified; Technology readiness-Large thermionic database; AMTEC efficiencies of 18% currently being demonstrated, with more growth potential available; and Technology growth-applicable to both solar thermal and reactor-based nuclear space power systems. Mechanical approaches and thermal/electric matching criteria for integrating thermionics and AMTEC into a single conversion device are described. Focusing primarily on solar thermal space power applications, parametric trends are presented to show the performance and cost potential that should be achievable with present-day technology in cascaded thermionic/AMTEC systems     

Radioisotope AMTEC power system designs for spacecraft applications

The authors describe and compare small (two-module) and larger (16-module) AMTEC (alkali metal thermal-to-electric converter) radioisotope powered systems and describe the computer model developed to predict their performance. The high efficiency and static conversion process combined with minimized parasitic losses and operating temperatures that allow the use of current materials while still maintaining a competitive radiator area are found to make AMTEC an excellent candidate for enhanced performance space power systems. AMTEC has the capability of reducing mission costs relative to other static conversion systems because of its high efficiency. AMTEC can also reduce cost relative to dynamic systems simply by being less massive (10 to 5000 W level), and its use eliminates the torque and vibration issues of dynamic systems     

Engine-driven generators for deep space probes

Summarizes important developments relating to power for deep space missions. The important alternatives to thermocouples for converting radioisotope heat into electric power are Stirling engines, alkali-metal thermal-to-electric converters (AMTEC), thermionic converters, and thermo-photovoltaic converters. The operating principles and limitations of these converters are described.     

Design and integration of a solar AMTEC power system with anadvanced global positioning satellite

A 1,200-W solar AMTEC (alkali metal thermal-to-electric conversion) power system concept was developed and integrated with an advanced global positioning system (GPS) satellite. The critical integration issues for the SAMTEC with the GPS subsystems included: (1) packaging within the Delta II launch vehicle envelope; (2) deployment and start-up operations for the SAMTEC; (3) SAMTEC operation during all mission phases; (4) satellite field of view restrictions with satellite operations; and (5) effect of the SAMTEC requirements on other satellite subsystems. The SAMTEC power system was compared with a conventional planar solar array/battery power system to assess the differences in system weight, size, and operations, Features of the design include the use of an advanced multitube, vapor anode AMTEC cell design with 24% conversion efficiency, and a direct solar insolation receiver design with integral LiF salt canisters for energy storage to generate power during the maximum solar eclipse cycle, The modular generator design consists of an array of multitube AMTEC cells arranged into a parallel/series electrical network with built-in cell redundancy. Our preliminary assessment indicates that the solar generator design is scaleable over a 500 to 2,500-W range. No battery power is required during the operational phase of the GPS mission. SAMTEC specific power levels greater than 5 We/kg and 160 We/m² are anticipated for a mission duration of 10 to 12 years in orbits with high natural radiation backgrounds     

Dynamo Models for Planets Other Than Earth

Observations from planetary spacecraft missions have demonstrated a spectrum of dynamo behaviour in planets. From currently active dynamos, to remanent crustal fields from past dynamo action, to no observed magnetization, the planets and moons in our solar system offer magnetic clues to their interior structure and evolution. Here we review numerical dynamo simulations for planets other than Earth. For the terrestrial planets and satellites, we discuss specific magnetic field oddities that dynamo models attempt to explain. For the giant planets, we discuss both non-magnetic and magnetic convection models and their ability to reproduce observations of surface zonal flows and magnetic field morphology. Future improvements to numerical models and new missions to collect planetary magnetic data will continue to improve our understanding of the magnetic field generation process inside planets.     

The Delivery of Water During Terrestrial Planet Formation

The planetary building blocks that formed in the terrestrial planet region were likely very dry, yet water is comparatively abundant on Earth. Here we review the various mechanisms proposed for the origin of water on the terrestrial planets. Various in-situ mechanisms have been suggested, which allow for the incorporation of water into the local planetesimals in the terrestrial planet region or into the planets themselves from local sources, although all of those mechanisms have difficulties. Comets have also been proposed as a source, although there may be problems fitting isotopic constraints, and the delivery efficiency is very low, such that it may be difficult to deliver even a single Earth ocean of water this way. The most promising route for water delivery is the accretion of material from beyond the snow line, similar to carbonaceous chondrites, that is scattered into the terrestrial planet region as the planets are growing. Two main scenarios are discussed in detail. First is the classical scenario in which the giant planets begin roughly in their final locations and the disk of planetesimals and embryos in the terrestrial planet region extends all the way into the outer asteroid belt region. Second is the Grand Tack scenario, where early inward and outward migration of the giant planets implants material from beyond the snow line into the asteroid belt and terrestrial planet region, where it can be accreted by the growing planets. Sufficient water is delivered to the terrestrial planets in both scenarios. While the Grand Tack scenario provides a better fit to most constraints, namely the small mass of Mars, planets may form too fast in the nominal case discussed here. This discrepancy may be reduced as a wider range of initial conditions is explored. Finally, we discuss several more recent models that may have important implications for water delivery to the terrestrial planets.     

Below One Earth: The Detection, Formation, and Properties of Subterrestrial Worlds

The Solar System includes two planets—Mercury and Mars—significantly less massive than Earth, and all evidence indicates that planets of similar size orbit many stars. In fact, one of the first exoplanets to be discovered is a lunar-mass planet around a millisecond pulsar. Novel classes of exoplanets have inspired new ideas about planet formation and evolution, and these “sub-Earths” should be no exception: they include planets with masses between Mars and Venus for which there are no Solar System analogs. Advances in astronomical instrumentation and recent space missions have opened the sub-Earth frontier for exploration: the Kepler mission has discovered dozens of confirmed or candidate sub-Earths transiting their host stars. It can detect Mars-size planets around its smallest stellar targets, as well as exomoons of comparable size. Although the application of the Doppler method is currently limited by instrument stability, future spectrographs may detect equivalent planets orbiting close to nearby bright stars. Future space-based microlensing missions should be able to probe the sub-Earth population on much wider orbits. A census of sub-Earths will complete the reconnaissance of the exoplanet mass spectrum and test predictions of planet formation models, including whether low-mass M dwarf stars preferentially host the smallest planets. The properties of sub-Earths may reflect their low gravity, diverse origins, and environment, but they will be elusive: Observations of eclipsing systems by the James Webb Space Telescope may give us our first clues to the properties of these small worlds.     

Planetary radio astronomy experiment for Voyager missions

The planetary radio astronomy experiment will measure radio spectra of planetary emissions in the range 1.2 kHz to 40.5 MHz. These emissions result from wave-particle-plasma interactions in the magnetospheres and ionospheres of the planets. At Jupiter, they are strongly modulated by the Galilean satellite Io.As the spacecraft leave the Earth's vicinity, we will observe terrestrial kilometric radiation, and for the first time, determine its polarization (RH and LH power separately). At the giant planets, the source of radio emission at low frequencies is not understood, but will be defined through comparison of the radio emission data with other particles and fields experiments aboard Voyager, as well as with optical data. Since, for Jupiter, as for the Earth, the radio data quite probably relate to particle precipitation, and to magnetic field strength and orientation in the polar ionosphere, we hope to be able to elucidate some characteristics of Jupiter auroras.Together with the plasma wave experiment, and possibly several optical experiments, our data can demonstrate the existence of lightning on the giant planets and on the satellite Titan, should it exist. Finally, the Voyager missions occur near maximum of the sunspot cycle. Solar outburst types can be identified through the radio measurements; when the spacecraft are on the opposite side of the Sun from the Earth we can identify solar flare-related events otherwise invisible on the Earth.     

Planetary Magnetic Field Measurements: Missions and Instrumentation

The nature and diversity of the magnetic properties of the planets have been investigated by a large number of space missions over the past 50 years. It is clear that without the magnetic field measurements that have been carried out in the vicinity of all the planets, the state of their interior and their evolution since their formation would not be understood even though questions remain about how the different planetary dynamos (in six of the eight planets) work. This paper describes the motivation for making magnetic field measurements, the instrumentation that has been used and many of the missions that carried out the pioneering observations. Emphasis is given to the historically important early missions even if the results from these have been in some cases bettered by later missions.     

The Contributions of Comets to Planets, Atmospheres, and Life: Insights from Cassini-Huygens, Galileo, Giotto, and Inner Planet Missions

Comets belong to a group of small bodies generally known as icy planetesimals. Today the most primitive icy planetesimals are the Kuiper Belt objects (KBOs) occupying a roughly planar domain beyond Neptune. KBOs may be scattered inward, allowing them to collide with planets. Others may move outward, some all the way into the Oort cloud. This is a spherical distribution of comet nuclei at a mean distance of ～50,000 AU. These nuclei are occasionally perturbed into orbits that intersect the paths of the planets, again allowing collisions. The composition of the atmosphere of Jupiter—and thus possibly all outer planets—shows the effects of massive early contributions from extremely primitive icy bodies that must have been close relatives of the KBOs. Titan may itself have a composition similar to that of Oort cloud comets. The origin and early evolution of its atmosphere invites comparison with that of the early Earth. Impacts of comets must have brought water and other volatile compounds to the Earth and the other inner planets, contributing to the reservoir of key ingredients for the origin of life. The magnitude of these contributions remains unknown but should be accessible to measurements by instruments on spacecraft.     

Radioisotope powered AMTEC systems

Alkali Metal Thermal to Electric Converter (AMTEC) systems are being developed for high performance spacecraft power systems, including small, General Purpose Heat Source (GPHS) powered systems. Several design concepts have been evaluated for the power range from 75 W to 1 kW. The specific power for these concepts has been found to be as high as 18-20 W/kg and 22 kW/m³. The projected area, including radiators, has been as low as 0.4 m²/kW. AMTEC power systems are extremely attractive, relative to other current and projected power systems, because AMTEC offers high power density, low projected area, and low volume. Two AMTEC cell design types have been identified. A single-tube cell is already under development and a multi-tube cell design, to provide additional power system gains, has undergone proof-of-principle testing. Solar powered AMTEC (SAMTEC) systems are also being developed, and numerous terrestrial applications have been identified for which the same basic AMTEC cells being developed for radioisotope systems are also suitable     

Mercury Dust Monitor (MDM) Onboard the Mio Orbiter of the BepiColombo Mission

Space Science Reviews - In this chapter, we review the contribution of space missions to the determination of the elemental and isotopic composition of Earth, Moon and the terrestrial planets, with...     

Updated Review of Planetary Atmospheric Electricity

This paper reviews the progress achieved in planetary atmospheric electricity, with focus on lightning observations by present operational spacecraft, aiming to fill the hiatus from the latest review published by Desch et al. (Rep. Prog. Phys. 65:955–997, 2002). The information is organized according to solid surface bodies (Earth, Venus, Mars and Titan) and gaseous planets (Jupiter, Saturn, Uranus and Neptune), and each section presents the latest results from space-based and ground-based observations as well as laboratory experiments. Finally, we review planned future space missions to Earth and other planets that will address some of the existing gaps in our knowledge.     

Imaging of the outer planets and satellites

Imaging is the most widely applicable single means of exploring the outer planets and their satellites and also complements other planet-oriented instruments. Imaging generally is more effectively carried out from a three-axis stabilized spacecraft than from a spinning one.Both specific experimental and broader exploratory goals must be recognized. Photography of Jupiter from terrestrial telescopes has revealed features which were neither predictable or predicted. Close-up imaging from fly-bys and orbiters affords the opportunity for discovery of atmospheric phenomena on the outer planets forever beyond the reach of terrestrial laboratories and intuition. On the other hand, a large number of specific applications of close-up imaging to study the giant planets are suggested by experience in photography from Earth and Mars orbit, and by ground-based telescopic studies of Jupiter and Saturn. Photographic observations of horizontal and vertical cloud structure at both global and finer scale, and motions and other time changes, will be essential for the study of atmospheric circulation. Size and composition of cloud particles also is a credible objective of fly-by and orbiter missions carrying both imaging and photo-polarimeter experiments.The satellites of the outer planets actually constitute three distinct classes: lunar-sized objects, asteroidal-sized objects, and particulate rings. Imaging promises to be the primary observational tool for each category with results that could impact scientific thinking in the late 70's and 80's as significantly as has close-up photography of Mars and the Moon in the last 10 yr.Finally, it should be recognized that photography occupies a unique role in the interaction between science and the popular mind. This popular, educational aspect of imaging constitutes a unique aspect of 20th Century culture. Imaging therefore is not only a primary basis for scientific discovery in the exploration of the outer planets, but an important human endeavor of enduring significance.Contribution No. 2163 of the Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, California 91109.This is one of the publications by the Science Advisory Group.     

High efficiency dynamic radioisotope power systems for spaceexploration-a status report

Background on the space exploration program is discussed, and the currently identified NASA exploration missions are contrasted with the missions that were being planned a year ago. Developments in high-efficiency dynamic radioisotope power systems are discussed: and Brayton and Stirling power conversion cycles are compared for the missions planned for the next decade. Issues related to the use of high-efficiency radioisotope (HER) power systems are identified. It is noted that HER power systems are approximately three times as efficient as current radioisotope thermoelectric generators(RTGs) and are therefore significantly cheaper. Additionally, the world's supply of ²³⁸Pu is extremely limited. Currently discussed missions would cut deeply into this supply if powered by RTGs     

Planetary Radiation Budgets

The energy state of a planet depends fundamentally on its radiation budget. Measurements made from space over past decades have led to significant revisions of ground-based estimates, both of the reflected fraction (the Bond albedo) of solar radiative flux and of the emitted thermal infrared radiation flux, for the Earth as well as for the other planets. After a brief survey of methods and difficulties in accurately determining planetary radiation budgets, we note contradictions in existing tabulations of global parameters, in particular Bond albedo. For the Earth, such contradictions are unjustified, considering that global and annual means as well as the seasonal cycle of Earth Radiation Budget components have now been determined with high accuracy. The Earth's Bond albedo is close to 0.3. Net storage of energy in the Earth-ocean system is close to zero, with a well-established annual cycle of amplitude close to ±12 Wm⁻². Some contradictions remain for the other terrestrial planets. For the giant planets, modern reduced values of the Bond albedo imply reduced but still significant internal energy generation.     

Thermal Evolution and Magnetic Field Generation in Terrestrial Planets and Satellites

Of the terrestrial planets, Earth and Mercury have self-sustained fields while Mars and Venus do not. Magnetic field data recorded at Ganymede have been interpreted as evidence of a self-generated magnetic field. The other icy Galilean satellites have magnetic fields induced in their subsurface oceans while Io and the Saturnian satellite Titan apparently are lacking magnetic fields of internal origin altogether. Parts of the lunar crust are remanently magnetized as are parts of the crust of Mars. While it is widely accepted that the magnetization of the Martian crust has been caused by an early magnetic field, for the Moon alternative explanations link the magnetization to plasma generated by large impacts. The necessary conditions for a dynamo in the terrestrial planets and satellites are the existence of an iron-rich core that is undergoing intense fluid motion. It is widely accepted that the fluid motion is caused by convection driven either by thermal buoyancy or by chemical buoyancy or by both. The chemical buoyancy is released upon the growth of an inner core. The latter requires a light alloying element in the core that is enriched in the outer core as the solid inner core grows. In most models, the light alloying element is assumed to be sulfur, but other elements such as, e.g., oxygen, silicon, and hydrogen are possible. The existence of cores in the terrestrial planets is either proven beyond reasonable doubt (Earth, Mars, and Mercury) or the case for a core is compelling as for Venus and the Moon. The Galilean satellites Io and Ganymede are likely to have cores judging from Galileo radio tracking data of the gravity fields of these satellites. The case is less clear cut for Europa. Callisto is widely taken as undifferentiated or only partially differentiated, thereby lacking an iron-rich core. Whether or not Titan has a core is not known at the present time. The terrestrial planets that do have magnetic fields either have a well-established inner core with known radius and density such as Earth or are widely agreed to have an inner core such as Mercury. The absence of an inner core in Venus, Mars, and the Moon (terrestrial bodies that lack fields) is not as well established although considered likely. The composition of the Martian core may be close to the Fe–FeS eutectic which would prevent an inner core to grow as long as the core has not cooled to temperatures around 1500 Kelvin. Venus may be on the verge of growing an inner core in which case a chemical dynamo may begin to operate in the geologically near future. The remanent magnetization of the Martian and the lunar crust is evidence for a dynamo in Mars’ and possibly the Moon’s early evolution and suggests that powerful thermally driven dynamos are possible. Both the thermally and the chemically driven dynamo require that the core is cooled at a sufficient rate by the mantle. For the thermally driven dynamo, the heat flow from the core into the mantle must by larger than the heat conducted along the core adiabat to allow a convecting core. This threshold is a few mW?m^?2 for small planets such as Mercury, Ganymede, and the Moon but can be as large as a few tens mW?m^?2 for Earth and Venus. The buoyancy for both dynamos must be sufficiently strong to overcome Ohmic dissipation. On Earth, plate tectonics and mantle convection cool the core efficiently. Stagnant lid convection on Mars and Venus are less efficient to cool the core but it is possible and has been suggested that Mars had plate tectonics in its early evolution and that Venus has experienced episodic resurfacing and mantle turnover. Both may have had profound implications for the evolution of the cores of these planets. It is even possible that inner cores started to grow in Mars and Venus but that the growth was frustrated as the mantles heated following the cessation of plate tectonics and resurfacing. The generation of Ganymede’s magnetic field is widely debated. Models range from magneto-hydrodynamic convection in which case the field will not be self-sustained to chemical and thermally-driven dynamos. The wide range of possible compositions for Ganymede’s core allows models with a completely liquid near eutectic Fe–FeS composition as well as models with Fe inner cores or cores in with iron snowfall.     

Micro-power Amtec systems

There are several terrestrial applications for energy conversion systems with electrical outputs of a few volts in the power range from hundreds of milliwatts to a few watts. Potential applications include: power for instrumentation, communication and device actuation in severe or harsh environments, as well as a variety of low duty cycle monitoring tasks for the military. For cost and/or packaging reasons, some of these applications are severely heat source limited. In this paper we describe the development and performance of AMTEC systems capable of producing 0.3 to 0.5 watts from a radioisotope heat source limited to a total thermal output of less than 4 watts, The approach utilizes a new “chimney cell” design and a thermal insulation system consisting of a specialized multi-layer insulation (MLI) package in combination with fibrous insulation. The cell operates at 0.4 W_c to over 0.5 W_c with an input surface temperature of 700°C. Measurements of the thermal performance of a readily manufactured MLI package indicate that operation at these temperatures will be achievable with a total heat input of ~4 W_th     

Planetary Magnetic Fields and Solar Forcing: Implications for Atmospheric Evolution

The solar wind and the solar XUV/EUV radiation constitute a permanent forcing of the upper atmosphere of the planets in our solar system, thereby affecting the habitability and chances for life to emerge on a planet. The forcing is essentially inversely proportional to the square of the distance to the Sun and, therefore, is most important for the innermost planets in our solar system—the Earth-like planets. The effect of these two forcing terms is to ionize, heat, chemically modify, and slowly erode the upper atmosphere throughout the lifetime of a planet. The closer to the Sun, the more efficient are these process. Atmospheric erosion is due to thermal and non-thermal escape. Gravity constitutes the major protection mechanism for thermal escape, while the non-thermal escape caused by the ionizing X-rays and EUV radiation and the solar wind require other means of protection. Ionospheric plasma energization and ion pickup represent two categories of non-thermal escape processes that may bring matter up to high velocities, well beyond escape velocity. These energization processes have now been studied by a number of plasma instruments orbiting Earth, Mars, and Venus for decades. Plasma measurement results therefore constitute the most useful empirical data basis for the subject under discussion. This does not imply that ionospheric plasma energization and ion pickup are the main processes for the atmospheric escape, but they remain processes that can be most easily tested against empirical data. Shielding the upper atmosphere of a planet against solar XUV, EUV, and solar wind forcing requires strong gravity and a strong intrinsic dipole magnetic field. For instance, the strong dipole magnetic field of the Earth provides a “magnetic umbrella”, fending of the solar wind at a distance of 10 Earth radii. Conversely, the lack of a strong intrinsic magnetic field at Mars and Venus means that the solar wind has more direct access to their topside atmosphere, the reason that Mars and Venus, planets lacking strong intrinsic magnetic fields, have so much less water than the Earth? Climatologic and atmospheric loss process over evolutionary timescales of planetary atmospheres can only be understood if one considers the fact that the radiation and plasma environment of the Sun has changed substantially with time. Standard stellar evolutionary models indicate that the Sun after its arrival at the Zero-Age Main Sequence (ZAMS) 4.5 Gyr ago had a total luminosity of ≈70% of the present Sun. This should have led to a much cooler Earth in the past, while geological and fossil evidence indicate otherwise. In addition, observations by various satellites and studies of solar proxies (Sun-like stars with different age) indicate that the young Sun was rotating more than 10 times its present rate and had correspondingly strong dynamo-driven high-energy emissions which resulted in strong X-ray and extreme ultraviolet (XUV) emissions, up to several 100 times stronger than the present Sun. Further, evidence of a much denser early solar wind and the mass loss rate of the young Sun can be determined from collision of ionized stellar winds of the solar proxies, with the partially ionized gas in the interstellar medium. Empirical correlations of stellar mass loss rates with X-ray surface flux values allows one to estimate the solar wind mass flux at earlier times, when the solar wind may have been more than 1000 times more massive. The main conclusions drawn on basis of the Sun-in-time-, and a time-dependent model of plasma energization/escape is that:

1. Solar forcing is effective in removing volatiles, primarily water, from planets,
2. planets orbiting close to the early Sun were subject to a heavy loss of water, the effect being most profound for Venus and Mars, and
3. a persistent planetary magnetic field, like the Earth’s dipole field, provides a shield against solar wind scavenging.