Tracking in Clutter using IMM-IPDA?Based Algorithms

We describe three single-scan probabilistic data association (PDA) based algorithms for tracking manoeuvering targets in clutter. These algorithms are derived by integrating the interacting multiple model (IMM) estimation algorithm with the PDA approximation. Each IMM model a posteriori state estimate probability density function (pdf) is approximated by a single Gaussian pdf. Each algorithm recursively updates the probability of target existence, in the manner of integrated PDA (IPDA). The probability of target existence is a track quality measure, which can be used for false track discrimination. The first algorithm presented, IMM-IPDA, is a single target tracking algorithm. Two multitarget tracking algorithms are also presented. The IMM-JIPDA algorithm calculates a posteriori probabilities of all measurement to track allocations, in the manner of the joint IPDA (JIPDA). The number of measurement to track allocations grows exponentially with the number of shared measurements and the number of tracks which share the measurements. Therefore, IMM-JIPDA can only be used in situations with a small number of crossing targets and low clutter measurement density. The linear multitarget IMM-IPDA (IMM-LMIPDA) is also a multitarget tracking algorithm, which achieves the multitarget capabilities by integrating linear multitarget (LM) method with IMM-IPDA. When updating one track using the LM method, the other tracks modulate the clutter measurement density and are subsequently ignored. In this fashion, LM achieves multitarget capabilities using the number of operations which are linear in the: number of measurements and the number of tracks, and can be used in complex scenarios, with dense clutter and a large number of targets.     

Multi-Target Tracking in Clutter without Measurement Assignment

When tracking targets using radars and sonars, the number of targets and the origin of data is uncertain. Data may be false measurements or clutter, or they may be detections from an unknown number of targets whose possible trajectories and detection processes can only be described in a statistical manner. Optimal all-neighbor multi-target tracking (MTT) in clutter enumerates all possible joint measurement-to-track assignments and calculates the a posteriori probabilities of each of these joint assignments. The numerical complexity of this process is combinatorial in the number of tracks and the number of measurements. One of the key differences between most MTT algorithms is the manner in which they reduce the computational complexity of the joint measurement-to-track assignment process. We propose an alternative approach, using a form of soft assignment, that enables us to bypass this step entirely. Specifically, our approach treats possible detections of targets followed by other tracks as additional clutter measurements. It starts by approximating the a~priori probabilities of measurement origin. These probabilities are then used to modify the clutter spatial density at the location of the measurements. A suitable single target tracking (STT) filter then uses the modified clutter intensity for updating the track state. In effect, the STT filter is transformed into an MTT filter with a numerical complexity that is linear in the number of tracks and the number of measurements. Simulations show the effectiveness of this approach in a number of different multi-target scenarios.     

Clutter map information for data association and track initialization

This paper considers the problem of forming and maintaining tracks when measurements have both uncertain origin and are corrupted by additive sensor noise. The spatial clutter measurement density is assumed nonhomogeneous and known. The PPDA-MAP algorithm provides a set of recursive formulae for data association and probability of target existence, thus enabling automatic track initiation, track maintenance, and track termination. New values for initial probability of target existence for IPDA-type algorithm are also derived. Simulation results compare the performance of IPDA-MAP with IPDA, IMM-PDA, IMM-PDA-MAP, EB-PDA and EB-PDA-MAP in a heavy and nonuniform clutter situation.     

A class of near optimal JPDA algorithms

The crucial problem in multiple target tracking is the hit-to-track data association. A hit is a received signal from a target or background clutter which provides positional information If an incorrect hit is associated with a track, that track could diverge and prematurely terminate or cause other tracks to also diverge. Most methods for hit-to-track data association fall into two categories: multiple hypothesis tracking (MHT) and joint probabilistic data association (JPDA). Versions of MHT use all or some reasonable hits to update a track and delay the decision on which hit was correct. JPDA uses a weighted sum of the reasonable hits to update a track. These weights are the probability that the hit originated from the target in track. The computational load for the joint probabilities increases exponentially as the number of targets increases and therefore, is not an attractive algorithm when expecting to track many targets. Reviewed here is the JPDA filter and two simple approximations of the joint probabilities which increase linearly in computational load as the number of targets increase. Then a new class of near optimal JPDA algorithms is introduced which run in polynomial time. The power of the polynomial is an input to the algorithm. This algorithm bridges the gap in computational load and accuracy between the very fast simple approximations and the efficient optimal algorithms     

Multiple target detection using modified high order correlations

This work is concerned with the problem of multiple target track detection in heavy clutter. Using the “modified high order correlation” (HOC) process and a track scoring mechanism a new method is developed to perform data association and track identification in the presence of heavy clutter. Using this new scheme any number of very close, crossing or splitting target tracks can be resolved without increasing the computational complexity of the algorithm. The applicability of the method for continuous detection of target tracks that can originate and terminate at any scan is also demonstrated, In addition, the operating characteristics as a function of the clutter density are also provided. Simulation results on all the cases are presented     

A multipath data association tracker for over-the-horizon radar

A new algorithm, multipath probabilistic data association (MPDA), for initiation and tracking in over-the-horizon radar (OTHR) is described. MPDA is capable of exploiting multipath target signatures arising from discrete propagation modes that are resolvable by the radar. Nonlinear measurement models exhibiting multipath target signatures in azimuth, slant range, and Doppler are used. Tracking is performed in ground coordinates and therefore depends on the provision of estimates of virtual ionospheric heights to achieve coordinate registration. Although the propagation mode characteristics are assumed to be known, their correspondence with the detections is not required to be known. A target existence model is included for automatic track maintenance. Numerical simulations for four resolvable propagation modes are presented that demonstrate the ability of the technique to initiate and maintain track at probabilities of detection of 0.4 per mode in clutter densities for which conventional probabilistic data association (PDA) has a high probability of track loss, and suffers from track bias. A nearest neighbor version of MPDA is also presented     

基于运动状态的航迹起始算法研究

 针对传统的基于逻辑的航迹起始方法在量测扩展过程中存在的弊端，提出了基于目标运动状态的航迹起始算法，并给出了更为精确的起始波门构造方法。利用目标的位置信息形成候选目标航迹，在候选目标航迹扩展过程中，采用提出的修正Hough变换提取目标状态信息，并根据目标〖JP2〗的状态信息对候选航迹进行检验。仿真结果表明，该算法比其他基于逻辑的方法有更低的虚警概率，并且对存储空间要求低，适于工程应用。     

Diffusion analysis of track loss in clutter

In tracking a target through clutter, the selection of incorrect measurements for track updating causes track divergence and eventual loss of track. The plot-to-track association algorithm is modeled as a Markov process and the tracking error is modeled as a diffusion process in order to study the mechanism of track loss analytically, without recourse to Monte Carlo simulations, for nearest-neighbor association in two space dimensions. The time evolution of the error distribution is examined, and the connection of the approach with diffusion theory is discussed. Explicit results showing the dependence of various performance parameters, such as mean time to lose track and track half-life, on the clutter spatial density are presented. The results indicate the existence of a critical density region in which the tracking performance degrades rapidly with increasing clutter density. An optimal gain adaptation procedure that significantly improves the tracking performance in the critical region is proposed     

Data Association and Track Management for the Gaussian Mixture Probability Hypothesis Density Filter

The Gaussian mixture probability hypothesis density (GM-PHD) recursion is a closed-form solution to the probability hypothesis density (PHD) recursion, which was proposed for jointly estimating the time-varying number of targets and their states from a sequence of noisy measurement sets in the presence of data association uncertainty, clutter, and miss-detection. However the GM-PHD filter does not provide identities of individual target state estimates, that are needed to construct tracks of individual targets. In this paper, we propose a new multi-target tracker based on the GM-PHD filter, which gives the association amongst state estimates of targets over time and provides track labels. Various issues regarding initiating, propagating and terminating tracks are discussed. Furthermore, we also propose a technique for resolving identities of targets in close proximity, which the PHD filter is unable to do on its own.     

基于点集合并的修正Hough变换TBD算法

在低信噪比条件下,基于Hough变换的检测前跟踪算法是进行强杂波背景下目标航迹检测的一种手段。本文针对Hough变换后一个目标产生多条可能航迹以及航迹内可能存在杂波点的问题,提出了一种基于能量最大点和点集合并的修正Hough变换检测前跟踪算法。该算法利用量测点时序、能量信息及目标速度先验信息对Hough变换后点迹进行关联和剔除,能够有效的对目标原始航迹进行回溯。针对高斯噪声背景下的飞行目标,仿真结果表明该算法能够对微弱目标进行有效检测,在目标数目、杂波密度、信噪比发生变化的条件下仍能保持较高的检测概率。     

SMALL TARGET TRACKING TECHNIQUE WITH DATA FUSION OF DISTRIBUTED SENSOR NET

ＳＭＡＬＬＴＡＲＧＥＴＴＲＡＣＫＩＮＧＴＥＣＨＮＩＱＵＥＷＩＴＨＤＡＴＡＦＵＳＩＯＮＯＦＤＩＳＴＲＩＢＵＴＥＤＳＥＮＳＯＲＮＥＴＣＨＥＮＧＨｏｎｇｗｅｉ（程洪玮）,ＺＨＯＵＹｉｙｕ（周一宇）,ＳＵＮＺｈｏｎｇｋａｎｇ（孙仲康）（Ｆａｃｕｌｔｙ４０６,...     

基于SVM算法的虚假航迹识别

针对云雨杂波和主被动干扰导致多雷达传感器产生虚假目标航迹的问题,利用支持向量机(SVM)算法的自主学习能力,通过构建基于数据驱动的判别模型进行虚假航迹识别。针对航迹起始得到的目标潜在航迹,利用人工智能数据驱动、自学习的特点,设计了SVM算法。通过对已标记真假的目标航迹样本进行离线学习,形成虚假航迹识别的SVM分类器,实现了基于数据驱动的判别模型代替先验知识规则约束的固定模型,并在工程应用中,利用SVM分类器在线识别虚假航迹,完成实时剔除。通过实测雷达数据实验验证,该算法的目标虚假航迹准确率高达95%以上,完全满足实际的工程应用需求。相比基于阈值或规则进行硬性判断的传统虚假航迹识别方法,所提出的算法不仅提高了准确率,还具有较高的实时性,能够适应复杂多变的杂波环境,在实际应用中具有更强的适应性和实用性。因此,提出的基于SVM算法的虚假航迹识别方法对于密集杂波场景下的虚假航迹剔除问题具有显著的实际应用价值。     

一种基于新三维随机Hough变换的航迹起始算法

针对雷达跟踪多目标时,目标点迹受杂波、噪声等因素影响,航迹起始难度大的问题,利用三维空间直线表示方法提出了一种4参数三维Hough变换算法.该算法是对传统二维Hough变换的拓展,它结合了传统的二维随机Hough变换理论,是一种新的三维随机Hough变换算法.通过该算法对理论数据和实测数据进行验证,结果表明,对于航迹区别较大的目标,该算法的航迹起始成功概率为98.5％;对于空间航迹相近的目标,该算法可成功将目标航迹从杂波中提取出来,虽然可能会出现航迹混淆,但利用目标先验信息可解决该问题,实现航迹起始.     

Analysis of CA-CFAR processors for linear-law detection

A method for evaluating the performance of cell-averaging constant false alarm rate (CA-CFAR) processors which use the amplitude of echo signals rather than their squared amplitude is presented. Results for the case of Rayleigh clutter/noise statistics are given. Detection probabilities are evaluated for the case of a Rayleigh fluctuating target embedded in Rayleigh clutter/noise for linear-law CA-CFAR processors. These results are observed to be practically identical to those of square-law CA-CFAR processors for which analytical expressions are readily available. These observations are verified using Monte Carlo simulations. The same conclusion is reached in the case of a nonfluctuating target embedded in Rayleigh clutter/noise for which only simulation results are presented     

Track monitoring when tracking with multiple 2D passive sensors

A fast method of track monitoring is presented which determines what tracks are good and what tracks have had data association problems and should be eliminated. The philosophy of tracking in a dense target environment with limited central processing unit (CPU) time is to acquire the targets, track them with as simple a filter as will meet requirements, and monitor the tracks to determine if they are still tracking a target or are tracking incorrect returns and should be terminated. After termination the true targets are reacquired. However, it is difficult to determine from simple track monitoring the correct interpretation of a poor track. Poor tracks can be a result of a sensor failure, target maneuver, or incorrect data association. The author describes track monitoring and provides a solution to this dilemma when tracking with multiple two-dimensional passive sensors. The method is much faster than other monitoring methods.<>     

Track segment association, fine-step IMM and initialization with Doppler for improved track performance

In this work we present a new track segment association technique to improve track continuity in large-scale target tracking problems where track breakages are common. A representative airborne early warning (AEW) system scenario, which is a challenging environment due to highly maneuvering targets, close target formations, large measurement errors, long sampling intervals, and low detection probabilities, provides the motivation for the new technique. Previously, a tracker using the interacting multiple model (IMM) estimator combined with an assignment algorithm was shown to be more reliable than a conventional Kalman filter based approach in tracking similar targets but it still yielded track breakages due to the difficult environment. In order to combine the broken track segments and improve track continuity, a new track segment association algorithm using a discrete optimization approach is presented. Simulation results show that track segment association yields significant improvements in mean track life as well as in position, speed, and course rms errors. Also presented is a modified one-point initialization technique with range rate measurements, which are typically ignored by other initialization techniques, and a fine-step IMM estimator, which improves performance in the presence of long revisit intervals. Another aspect that is investigated is the benefit of "deep" (multiframe or N-dimensional, with N > 2) association, which is shown to yield significant benefit in reducing the number of false tracks.     

Sequential track extraction

Sensors like radar or sonar usually produce data on the basis of a single frame of observation: target detections. The detection performance is described by quantities like detection probability Pd and false alarm density f. A different task of detection is formation of tracks of targets unknown in number from data of multiple consecutive frames of observation. This leads to quantities which are of a higher level of abstraction: extracted tracks. This again is a detection process. Under benign conditions (high Pd, low f and well separated targets) conventional methods of track initiation are recommended to solve a simple task. However, under hard conditions the process of track extraction is known to be difficult. We here concentrate on the case of well separated targets and derive an optimal combinatorial method which can be used under hard operating conditions. The method relates to MHT (multiple hypothesis tracking), uses a sequential likelihood ratio test and derives benefit from processing signal strength information. The performance of the track extraction method is described by parameters such as detection probability and false detection rate on track level, while Pd and f are input parameters which relate to the signal-to-noise interference ratio (SNIR), the clutter density, and the threshold set for target detection. In particular the average test lengths are analyzed parametrically as they are relevant for a user to estimate the time delay for track formation under hard conditions     

组合式快速JPDA算法

基于有序状态空间搜索方法,定义联合事件为问题节点,将多目标数据关联问题求解转化为状态空间问题求解。定义联合数据关联概率函数对数表达为节点的估价函数,减少扩展节点数,迅速产生和搜索Ｎ个最大联合概率事件。给出快速计算Ｎ个最大联合概率事件的ＪＰＤＡ公式,并提出一种确定新生节点是否是已生成节点的简便方法。算法的搜索次数不随回波数增加而增加,有效地解决了传统ＪＰＤＡ算法的实时性问题,兼有贝叶斯方法和非贝叶斯方法的各自优点。     

Pade approximations to matched filter amplitude probabilityfunctions

Performance analysis of echolocation systems requires the probability density function (pdf) or survival function of a matched filter output. A method is presented to derive approximations to these functions using a Pade approximation to their associated characteristic function (CF). The method is based on the Hankel transform. It allows computation of detection probabilities when the matched filter responses to clutter and a target are separately known. Several numerical examples are presented     

A multi-frame track-before-detect algorithm based on root label clustering for multiple targets

In this paper, a novel multi-frame track-before-detect algorithm is proposed, which is based on root label clustering to reduce the high computational complexity arising by observation area expansion and clutter/noise density increase. A criterion of track extrapolation is used to construct state transition set, root label is marked by state transition set to obtain the distribution information of multiple targets in measurement space, then measurement plots of multi-frame are divided into sever...