Development of a GNSS water vapour tomography system using algebraic reconstruction techniques

A GNSS water vapour tomography system developed to reconstruct spatially resolved humidity fields in the troposphere is described. The tomography system was designed to process the slant path delays of about 270 German GNSS stations in near real-time with a temporal resolution of 30 min, a horizontal resolution of 40 km and a vertical resolution of 500 m or better. After a short introduction to the GPS slant delay processing the framework of the GNSS tomography is described in detail. Different implementations of the iterative algebraic reconstruction techniques (ART) used to invert the linear inverse problem are discussed. It was found that the multiplicative techniques (MART) provide the best results with least processing time, i.e., a tomographic reconstruction of about 26,000 slant delays on a 8280 cell grid can be obtained in less than 10 min. Different iterative reconstruction techniques are compared with respect to their convergence behaviour and some numerical parameters. The inversion can be considerably stabilized by using additional non-GNSS observations and implementing various constraints. Different strategies for initialising the tomography and utilizing extra information are discussed. At last an example of a reconstructed field of the wet refractivity is presented and compared to the corresponding distribution of the integrated water vapour, an analysis of a numerical weather model (COSMO-DE) and some radiosonde profiles.     

GNSS water vapour tomography – Expected improvements by combining GPS,GLONASS and Galileo observations

The German Research Centre for Geosciences (GFZ) operates a GNSS water vapour tomography system using about 350 German GNSS stations. The GNSS data processing at the GFZ works in near real-time and provides zenith total delays, integrated water vapour and slant delay data operationally. This large data set of more than 50,000 slant delays per hour is used to reconstruct spatially resolved humidity fields by means of tomographic techniques. It can be expected that additional observations from the future Galileo system provide more information with improved quality. A simulation study covering 12 h at 14 July 2009 was therefore started to estimate the impact of GPS, Galileo and GLONASS data on the GNSS tomography. It is shown that the spatial coverage of the atmosphere with slant paths is highly improved by combining observations from two or three satellite systems. Equally important for a reliable tomographic reconstruction is the distribution of slant path intersections as they are required to locate the integrated delay information. The number of intersection points can be increased by a factor of 4 or 8 if two or three systems are combined and their distribution will cover larger regions of the atmosphere. The combined data sets can be used to increase the spatiotemporal resolution of the reconstructed humidity fields up to 30 km horizontally, 300 m vertically and 15 min. The reconstruction quality could not be improved considerably using the currently available techniques.     

GNSS radio tomography of the ionosphere: The problem with essentially incomplete data

We discuss the specific features of the spatiotemporal radio tomography of ionospheric electron density based on the data from high orbiting global navigational satellite system (GNSS). The main peculiarities are four-dimensionality of the problem and essential incompleteness of input data. The approach suggested for the solution of this problem is based on the search for the solution with minimal Sobolev’s norm (the most smooth solution), which provides, in particular, smooth extension of the solution to the area where no input data is available. Methods and algorithms for the solution of the problem are developed, and the resolution of the proposed technique is estimated. Examples of global and regional radio tomographic imaging based on GNSS data are presented. The obtained results are compared with the data of ionosondes and with the results of radio tomography based on the radio transmissions from low-orbiting satellites.     

GNSS receiver clock modeling when using high-precision oscillators and its impact on PPP

Processing data from Global Navigation Satellite Systems (GNSS) always requires time synchronization between transmitter and receiver clocks. Due to the limited stability of the receiver’s internal oscillator, the offset of the receiver clock with respect to the system time has to be estimated for every observation epoch or eliminated by processing differences between simultaneous observations. If, in contrast, the internal oscillator of the receiver is replaced by a stable atomic clock one can try to model the receiver clock offset, instead of estimating it on an epoch-by-epoch basis. In view of the progress made in the field of high-precision frequency standards we will investigate the technical requirements for GNSS receiver clock modeling at the carrier phase level and analyze its impact on the precision of the position estimates.     

Tomographic reconstruction of wet and total refractivity fields from GNSS receiver networks

One of the most attractive scientific issues in the use of GNSS (Global Navigation Satellite System) signals, from a meteorological point of view, is the retrieval of high resolution tropospheric water vapour maps. The real-time (or quasi real-time) knowledge of such distributions could be very useful for several applications, from operative meteorology to atmospheric modelling. Moreover, the exploitation of wet refractivity field reconstruction techniques can be used for atmospheric delay compensation purposes and, as a very promising activity, it could be applied for example to calibrate SAR or Interferometric-SAR (In-SAR) observations for land remote sensing. This is in fact one of the objectives of the European Space Agency project METAWAVE (Mitigation of Electromagnetic Transmission errors induced by Atmospheric Water vapour Effects), in which several techniques are investigated and results were compared to identify a strategy to remove the contribution of water vapour induced propagation delays in In-SAR products. Within this project, the tomographic reconstruction of three dimensional wet refractivity fields from tropospheric delays observed by a local GNSS network (9 dual frequency GPS receivers) deployed over Como area (Italy), during 12–18 October, 2008, was performed. Despite limitations due to the network design, internal consistency tests prove the efficiency of the adopted tomographic approach: the rms of the difference between reconstructed and GNSS observed Zenith Wet Delays (ZWD) are in the order of 4 mm. A good agreement is also observed between our ZWDs and corresponding delays obtained by vertically integrating independent wet refractivity fields, taken by co-located meteorological analysis. Finally, during the observing period, reconstructed vertical wet refractivity profiles evolution reveals water vapour variations induced by simple cloud covering. Even if our main goal was to demonstrate the effectiveness in adopting tomographic reconstruction procedures for the evaluation of propagation delays inside water vapour fields, the actual water vapour vertical variability and its evolution with time is well reproduced, demonstrating also the effectiveness of the inferred 3D wet refractivity fields.     

Tomographic determination of the spatial distribution of water vapor using GPS observations

With the advent of the GPS navigation system, a promising ground based technique has been introduced which makes it possible to estimate the amount of water vapor in the troposphere from operational GPS networks at relatively low additional costs. While the estimation of the integrated amount is currently well established, the determination of the spatial water vapor distribution and its temporal variation are still a major challenge. To account for the vertical resolution, several tomographic approaches were pursued. We developed the software package AWATOS (atmospheric water vapor tomography software) which is based on the assimilation of double differenced GPS observations. Applying a least-squares inversion, the inhomogeneous spatial distribution of water vapor is determined. An extensive investigation has been carried out in Switzerland. GPS measurements are performed by the dense permanent Swiss national GPS network AGNES of the Swiss Federal Office of Topography (swisstopo). A total of 40 equally distributed water vapor profiles have been estimated on an hourly basis. For the purpose of validation, 22 radiosonde profiles were used at the GPS and meteorological station Payerne. Furthermore, data of the numerical weather model aLMo (alpine model in Switzerland, MeteoSwiss) were compared with the tomographic results. An overall good agreement of the three methods with an rms of better than 1.6 g/m³ absolute humidity was achieved. The results show that AGNES can be used as a dedicated network for the purpose of GPS-tomography, using a horizontal resolution of approximately 50 km and height layers of 300–500 m thickness in the lower troposphere.     

Galileo real-time orbit determination with multi-frequency raw observations

Real-time GNSS-based applications require corresponding real-time orbit products. While traditional GNSS orbits are generated with the dual-frequency IF (Ionosphere-Free) model, the increase of multi-frequency signal satellites brings new challenges for the data processing. Therefore, real-time orbit determination with the multi-frequency UC (Uncombined) model is introduced in this study considering its flexibility. With the derived mathematical model conforming to IGS (International GNSS Service) dual-frequency clock definition and one-week triple-frequency Galileo observation data from 90 IGS network stations, the convergence and accuracy of real-time orbits is assessed and the characteristics of satellite IFCB (Inter-Frequency Clock Bias) are analyzed. Results indicate that the model differences, including dual-frequency IF model, dual-frequency UC model and triple-frequency UC model, contribute to only cm-level differences with CODE (Center for Orbit Determination in Europe) final orbits after a convergence time of around 12 h. The constellation-mean RMS (Root Mean Square) differences of the converged real-time orbits with the CODE final orbits reaches about 5.0 cm, 7.0 cm and 5.0 cm for the radial, tangential and normal directions. The convergence of satellite IFCB is much faster than that of satellite orbit, which reflects a loose correlation between these two parameters. While the Galileo satellite IFCB are temporally stable, the modeling of satellite IFCB may be unreliable when over constrained and becomes even more unstable with commonly encountered datum changes. In summary, real-time GNSS orbit determination with multi-frequency raw observations is feasible and extendable with proper treatment of IFCB.     

Calibration errors in determining slant Total Electron Content (TEC) from multi-GNSS data

The global navigation satellite system (GNSS) is presently a powerful tool for sensing the Earth's ionosphere. For this purpose, the ionospheric measurements (IMs), which are by definition slant total electron content biased by satellite and receiver differential code biases (DCBs), need to be first extracted from GNSS data and then used as inputs for further ionospheric representations such as tomography. By using the customary phase-to-code leveling procedure, this research comparatively evaluates the calibration errors on experimental IMs obtained from three GNSS, namely the US Global Positioning System (GPS), the Chinese BeiDou Navigation Satellite System (BDS), and the European Galileo. On the basis of ten days of dual-frequency, triple-GNSS observations collected from eight co-located ground receivers that independently form short-baselines and zero-baselines, the IMs are determined for each receiver for all tracked satellites and then for each satellite differenced for each baseline to evaluate their calibration errors. As first derived from the short-baseline analysis, the effects of calibration errors on IMs range, in total electron content units, from 1.58 to 2.16, 0.70 to 1.87, and 1.13 to 1.56 for GPS, Galileo, and BDS, respectively. Additionally, for short-baseline experiment, it is shown that the code multipath effect accounts for their main budget. Sidereal periodicity is found in single-differenced (SD) IMs for GPS and BDS geostationary satellites, and the correlation of SD IMs over two consecutive days achieves the maximum value when the time tag is around 4?min. Moreover, as byproducts of zero-baseline analysis, daily between-receiver DCBs for GPS are subject to more significant intra-day variations than those for BDS and Galileo.     

The multi-source data fusion global ionospheric modeling software—IonoGim

We introduce a new global ionospheric modeling software—IonoGim, using ground-based GNSS data, the altimetry satellite and LEO (Low Earth Orbit) occultation data to establish the global ionospheric model. The software is programmed by C++ with fast computing speed and highly automatic degree, it is especially suitable for automatic ionosphere modeling. The global ionospheric model and DCBs obtained from IonoGim were compared with the CODE (Center for Orbit Determination in Europe) to verify its accuracy and reliability. The results show that IonoGim and CODE have good agreement with small difference, indicating that IonoGim owns high accuracy and reliability, and can be fully applicable for high-precision ionospheric research. In addition, through comparison between only using ground-based GNSS observations and multi-source data model, it can be demonstrated that the space-based ionospheric data effectively improve the model precision in marine areas where the ground-based GNSS tracking station lacks.     

Combining GPS and GLONASS for time and frequency transfer

Geodetic time and frequency transfer (TFT) consists in a comprehensive modeling of code and carrier phase observations from Global Navigation Satellite System (GNSS) in order to determine the synchronization errors between two remote clocks connected to GNSS receivers. Using either common view (CV), or Precise Point Positioning (PPP), current GNSS time transfer uses only GPS measurements. This study combines GPS and GLONASS observations in geodetic TFT in order to determine the added value of the GLONASS data in the results. Using the software Atomium, we demonstrate on one hand that using both constellations improves the solution for both CV and PPP results when analysing short data batches. In that case, there are not enough GPS code data to calibrate the solution, and additional GLONASS code data allows us to retrieve a correct absolute value for the solution. On the other hand, the CV results of frequency transfer are not significantly affected by adding GLONASS data, while in PPP the combination with GLONASS modifies the frequency transfer results, and in particular the daily frequency offset, with maximum differences of 150 ps between the TFT solutions obtained with GPS-only or GPS + GLONASS.     

The impact on tsunami detection from space using GNSS-reflectometry when combining GPS with GLONASS and Galileo

The devastating Sumatra tsunami in 2004 demonstrated the need for a tsunami early warning system in the Indian Ocean. Such a system has been installed within the German-Indonesian Tsunami Early Warning System (GITEWS) project. Tsunamis are a global phenomenon and for global observations satellites are predestined. Within the GITEWS project a feasibility study on a future tsunami detection system from space has therefore been carried out. The Global Navigation Satellite System Reflectometry (GNSS-R) is an innovative way of using GNSS signals for remote sensing. It uses ocean reflected GNSS signals for sea surface altimetry. With a dedicated Low Earth Orbit (LEO) constellation of satellites equipped with GNSS-R receivers, densely spaced sea surface height measurements could be established to detect tsunamis. Some general considerations on the geometry between LEO and GNSS are made in this simulation study. It exemplary analyzes the detection performance of a GNSS-R constellation at 900 km altitude and 60° inclination angle when applied to the Sumatra tsunami as it occurred in 2004. GPS is assumed as signal source and the combination with GLONASS and Galileo signals is investigated. It can be demonstrated, that the combination of GPS and Galileo is advantageous for constellations with few satellites while the combination with GLONASS is preferable for constellations with many satellites. If all three GNSS are combined, the best detection performance can be expected for all scenarios considered. In this case an 18 satellite constellation will detect the Sumatra tsunami within 17 min with certainty, while it takes 53 min if only GPS is considered.     

GNSS实时动态授时精度分析

基于GNSS载波相位观测值的实时动态授时，可有效规避PPP授时对实时精密轨道和钟差产品的依赖问题，对短距离动、静态高精度时间用户具有重要意义。为了更好地验证GNSS实时动态授时性能，基于中国科学院国家授时中心时间频率资源和三个GNSS跟踪站长达2个月的观测数据，以GPS系统为例开展了授时试验。与事后PPP时间传递相比，实时动态授时结果差异STD优于0.15ns；与光纤双向时间传递结果相比，实时动态授时结果差异STD优于0.5ns。试验表明，GNSS实时动态授时精度能够达到亚纳秒量级，可为下一步推广应用提供重要参考。     

LEO enhanced Global Navigation Satellite System (LeGNSS) for real-time precise positioning services

Global Navigation Satellite System (GNSS) has been widely used in many geosciences areas with its Positioning, Navigation and Timing (PNT) service. However, GNSS still has its own bottleneck, such as the long initialization period of Precise Point Positioning (PPP) without dense reference network. Recently, the concept of PNTRC (Positioning, Navigation, Timing, Remote sensing and Communication) has been put forward, where Low Earth Orbit (LEO) satellite constellations are recruited to fulfill diverse missions. In navigation aspect, a number of selected LEO satellites can be equipped with a transmitter to transmit similar navigation signals to ground users, so that they can serve as GNSS satellites but with much faster geometric change to enhance GNSS capability, which is named as LEO constellation enhanced GNSS (LeGNSS). As a result, the initialization time of PPP is expected to be shortened to the level of a few minutes or even seconds depending on the number of the LEO satellites involved. In this article, we simulate all the relevant data from June 8th to 14th, 2014 and investigate the feasibility of LeGNSS with the concentration on the key issues in the whole data processing for providing real-time PPP service based on a system configuration with fourteen satellites of BeiDou Navigation Satellite System (BDS), twenty-four satellites of the Global Positioning System (GPS), and sixty-six satellites of the Iridium satellite constellations. At the server-end, Precise Orbit Determination (POD) and Precise Clock Estimation (PCE) with various operational modes are investigated using simulated observations. It is found out that GNSS POD with partial LEO satellites is the most practical mode of LeGNSS operation. At the user-end, the Geometry Dilution Of Precision (GDOP) and Signal-In-Space Ranging Error (SISRE) are calculated and assessed for different positioning schemes in order to demonstrate the performance of LeGNSS. Centimeter level SISRE can be achieved for LeGNSS.     

GNSS reflectometry and remote sensing: New objectives and results

The Global Navigation Satellite System (GNSS) has been a very powerful and important contributor to all scientific questions related to precise positioning on Earth’s surface, particularly as a mature technique in geodesy and geosciences. With the development of GNSS as a satellite microwave (L-band) technique, more and wider applications and new potentials are explored and utilized. The versatile and available GNSS signals can image the Earth’s surface environments as a new, highly precise, continuous, all-weather and near-real-time remote sensing tool. The refracted signals from GNSS radio occultation satellites together with ground GNSS observations can provide the high-resolution tropospheric water vapor, temperature and pressure, tropopause parameters and ionospheric total electron content (TEC) and electron density profile as well. The GNSS reflected signals from the ocean and land surface could determine the ocean height, wind speed and wind direction of ocean surface, soil moisture, ice and snow thickness. In this paper, GNSS remote sensing applications in the atmosphere, oceans, land and hydrology are presented as well as new objectives and results discussed.     

Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

Differential code bias estimation based on uncombined PPP with LEO onboard GPS observations

Differential Code Bias (DCB) is an essential correction that must be provided to the Global Navigation Satellite System (GNSS) users for precise position determination. With the continuous deployment of Low Earth Orbit (LEO) satellites, DCB estimation using observations from GNSS receivers onboard the LEO satellites is drawing increasing interests in order to meet the growing demands on high-quality DCB products from LEO-based applications, such as LEO-based GNSS signal augmentation and space weather research. Previous studies on LEO-based DCB estimation are usually using the geometry-free combination of GNSS observations, and it may suffer from significant leveling errors due to non-zero mean of multipath errors and short-term variations of receiver code and phase biases. In this study, we utilize the uncombined Precise Point Positioning (PPP) model for LEO DCB estimation. The models for uncombined PPP-based LEO DCB estimation are presented and GPS observations acquired from receivers onboard three identical Swarm satellites from February 1 to 28, 2019 are used for the validation. The results show that the average Root Mean Square errors (RMS) of the GPS satellite DCBs estimated with onboard data from each of the three Swarm satellites using the uncombined PPP model are less than 0.18 ns when compared to the GPS satellite DCBs obtained from IGS final daily Global Ionospheric Map (GIM) products. Meanwhile, the corresponding average RMS of GPS satellite DCBs estimated with the conventional geometry-free model are 0.290, 0.210, 0.281 ns, respectively, which are significantly larger than those obtained with the uncombined PPP model. It is also noted that the estimated GPS satellite DCBs by Swarm A and C satellites are highly correlated, likely attributed to their similar orbit type and space environment. On the other hand, the Swarm receiver DCBs estimated with uncombined PPP model, with Standard Deviation (STD) of 0.065, 0.037 and 0.071 ns, are more stable than those obtained from the official Swarm Level 2 products with corresponding STD values of 0.115, 0.101, and 0.109 ns, respectively. The above indicates that high-quality DCB products can be estimated based on uncombined PPP with LEO onboard observations.     

Geosynchronous satellites expanding a future GNSS satellite constellation: A precise orbit determination study

The integration of geosynchronous orbit (GSO) satellites in Global Navigation Satellite Systems (GNSS) is mostly discussed to enable a regional enhancement for tracking. But how do GSO satellites affect the orbit determination of the rest of the constellation? How accurately can these orbits be determined in a future GNSS tracking scenario with optical links? In this simulation study we analyze the benefit of GSO satellites as an expansion of a MEO (Medium Earth Orbit) satellite constellation – we selected the Galileo satellite constellation – for MEO Precise Orbit Determination (POD). We address not only the impact on POD of MEO satellites but also the possibility to precisely determine the GSO satellites – geostationary orbits (GEO) and inclined geosynchronous orbits (IGSO) – in such an expanded MEO constellation. In addition to GNSS microwave observations, we analyze the influence of different optical links between the participating entities: Optical two-way Inter-Satellite Links (OISL) and ground-space oriented Optical Two-Way Links (OTWL). These optical measurements together with the GNSS microwave observations give a remarkable benefit for the POD capability. In the case of GNSS and OTWL, we simulate the measurements with regard to a network of 16 ground stations. We pay great attention to the simulation of systematic effects of all measurement techniques. We discuss the influence on the systematic errors as well as the formal orbit uncertainties. A MEO constellation expanded with GSO satellites as well as the use of optical links together with GNSS observations not only improves the MEO satellite orbits but also the GSOs to a great extent.     

GNSS模拟器中频调制卡设计与实现

GNSS(Global Navigation Satellite System)信号模拟器能够根据用户所设置的GNSS系统和信号形式、载体动态和环境参数,精确模拟出载体收到的卫星信号,这为GNSS系统级仿真试验和接收机的测试提供一种高效的工具.主要研究兼容多系统多频点的卫星信号模拟器中频信号发生器和数字信号处理技术,提出了数字合路与功率控制的方法和信号相位精确模拟的途径;在基于PCIE+DSP+FPGA+DAC架构的中频板卡上完成了与PC通信、波形控制参数计算和更新、基带信号调制以及模拟中频信号的产生;最后给出了与相应的GNSS接收机的对接结果,验证了所产生中频信号的正确性和信号质量.     

星载GNSS海洋反射信号建模与仿真

星载GNSS反射信号建模与仿真对GNSS反射信号正逆问题的研究及接收机算法和性能的评估非常重要。从几何、信号和信息的角度建立了星载GNSS反射信号分层建模方法。详细论述了星载GNSS反射信号的双基几何关系,建立了海风、涌浪和降雨驱动的线性组合海浪谱,并基于此计算了GNSS反射信号双基散射系数,基于各散射单元独立散射的假设推导了反射信号模型,通过仿真产生了星载GNSS反射信号及时延-多普勒相关功率,并与UK TDS-1卫星实测相关功率进行了对比分析。结果显示,通过先产生反射信号后处理得到的相关功率和直接端对端产生的相关功率与UK TDS-1卫星实测的相关功率的余弦相似度分别为0.97和0.94,所提架构和方法可正确对星载GNSS反射信号进行建模和仿真。同时,通过所建平台分析了涌浪和降雨形成的海浪谱对星载GNSS反射信号的影响。结果发现,涌浪主要影响低风速探测而对高风速无影响,降雨对星载GNSS反射信号无明显影响。      

Multi- GNSS reflectometry performance evaluation for coastal sea level monitoring: A case study in Antarctic Peninsula

Antarctica is a continent that crucial for studying climate change and its progression across time, as well as analyzing and forecasting local and global change. In this environment, due to the challenges caused by sea-level rise, storm surges, and tsunamis, sustainability is a critical concern, particularly for coastal regions. As a result, the long-term observations that will be conducted in Antarctica are critical for monitoring the adverse impacts of climate change. In recent years, many monitoring approaches, both space, and ground-based are performed to monitor sea/ice level trends in space-based scientific investigations conducted in and around the region. In the study, based on one year of observations from the Palmer GNSS Station, the GNSS Reflectometry technique was used to measure the sea level on the Antarctic Peninsula (PALM). GNSS Station observations were analyzed with a Lomb-Scargle periodogram to monitor sea-level changes, and results were validated with data from a co-located tide gauge (TG). The results show that the correlation between GNSS-R sea-level changes and tidal sea-level changes is found as 0.91.