Angle Estimation in Amplitude Comparison Monopulse Systems

The problem of estimation of angle of arrival in amplitude comparison monopulse (ACM) radars in the presence of internally generated thermal noise is considered. A pulse-type radar is assumed and angular noise is postulated to be absent. In the treatment of the problem, explicit inclusion of various simple models for the pulse returns is made to draw a relationship between the a priori statistics of the echo signals and the ability to estimate the angle of arrival in ACM radars. A maximum likelihood analysis is made to determine the form of the estimates of angle of arrival for the various cases and the accuracy of these estimates is evaluated as a function of the signal-to-noise ratio per hit and of the number of hits. Although most of the estimates considered have already received attention, many of the results are believed to be new.     

The Effect of Jamming on Monopulse Accuracy

An expression is applied for the probability density function (pdf) of the monopulse ratio when skin echoes from a passive target are contaminated by interference from a jammer. The analysis is valid for arbitrary signal-to-jam ratio and arbitrary locations of the target and jammer in the beam. For an on-axis skin target and a stand-off jammer at an off-axis location, the "pulling" effect of the jammer and the accuracy of the angle estimate are compared with the approximations currently employed in radar performance analysis. The pdf of the monopulse ratio for large and for small signal-to-jam ratios is presented, showing that the pdf is bimodal at small signal-to-jam ratio.     

一种改进的雷达低空目标仰角估计算法

由于地(海)面反射的多径镜像信号的存在,使雷达低空目标的仰角估计成了难题。而三子孔径算法是针对该难题而提出的一种有效算法。此算法基于极大似然算法将等距线阵均分为三个子孔径,从而简化了估计函数,也使计算量大大减少。本文在三子孔径算法的基础上,利用目标信号与镜像信号在入射角度上的正弦约束条件,给出了一种改进算法。计算机仿真结果显示改进算法在性能上要优于三子孔径算法。     

Role of processing geometry in SAR raw data focusing

Synthetic aperture radar (SAR) systems require that a focusing operation be performed on the received backscattered echoes (raw data) to generate high-resolution microwave images. Either due to platform attitude instabilities, or to Earth rotation effects, the SAR raw data may be acquired in "squinted" geometries, i.e., with the radar beam directed with an offset angle (squint angle) from the broadside direction. This research investigates the impact of the focusing operation carried out on squinted raw data acquisitions performed by SAR sensors operating in the stripmap mode. To this end the 2D frequency SAR processing approach is generalized with respect to conical, i.e., nonorthogonal, reference systems. This allows analysis of the geometric, spectral, and phase aberrations introduced in the images by the chosen processing geometry with respect to the acquisition, and identification of the focusing procedure that minimizes these aberrations. The whole theory is validated by experimental results carried out on simulated data. Moreover, the extension of this analysis to the interferometric case where these aberrations may have a significant role is also investigated     

Precision tracking algorithms for ISAR imaging

The simultaneous imaging and tracking of a moving target is one of the most difficult problems in inverse synthetic aperture radar (ISAR) signal processing. The problem is addressed here using a two-antenna imaging radar. The target range shift is sensed with an exponentially averaged envelope correlation algorithm while the angle change is measured with a differential phase shift algorithm. The three state Kalman filters are used in range and azimuth dimensions to provide both a filtered estimate and a one-sample-ahead prediction for the purpose of target tracking. The filtered range shift provides an accurate information for range bin alignment, and the target angle change provides the angular positions of the synthetic array elements. Therefore, the ISAR imaging simply becomes processing of a circular-arc aperture. The algorithms are verified both by computer simulations and also with experimental data processing     

Characterizing radar emissions using a robust countermeasurereceiver

The author presents a high-sensitivity signal processing approach for detecting and estimating the angle of arrival (AOA), frequency and pulse repetition frequency (PRF) of multiple radar emitters using broadband interferometers. Two time series are generated using information embedded in the sampled cross correlation of the signals obtained from three antenna elements (i.e. two base legs). The phase and amplitude of a complex Fourier transform of these two time series with respect to the sampling clock are used to estimate the AOA and PRF of pulsed emitters     

Test Results with an Experimental Direction-Finding System

A direction-finding system was built that can simultaneously estimate the arrival angles of two incident signals. It is conceptually straightforward to extend the system to cases with greater numbers of signals. The system is designed to work with uncorrelated signals whose form is unknown, e.g., two communications signals residing in the same bandwidth. Pulsed as well as continuous signals can be handled. The technique involves the determination of the received signal's correlation matrix as an intermediate step. Pattern range tests were performed to determine angle estimate bias and accuracy.     

Detection of moving targets in wideband SAR

A likelihood ratio is proposed for moving target detection in a wideband (WB) synthetic aperture radar (SAR) system. WB is defined here as any systems having a large fractional bandwidth, i.e., an ultra wide frequency band combined with a wide antenna beam. The developed method combines time-domain fast backprojection SAR processing methods with moving target detection using space-time processing. The proposed method reduces computational load when sets of relative speeds can be tested using the same clutter-suppressed subaperture beams. The proposed method is tested on narrowband radar data.     

Airborne array aperture UWB UHF radar-motivation and systemconsiderations

This paper discusses the necessity, feasibility, and technology of FOPEN GMTI. It argues that this functionality may be one mode in a multi-function UWB UHF system, which jointly possesses the capabilities for air target MTI and high resolution FOPEN SAR. The radar platform may be a UAV or an aircraft, whereas, we propose to use the push boom type of antenna mounting previously adopted with the advantage for the CARABAS II UWB VHF SAR. Presently, the push booms will hold a set of UWB UHF antenna elements. This paper relates GMTI to SAR, extended from imaging stationary ground to the 4-parameter set of targets in linear and uniform motion relative to ground. It is recognised that this extended imaging problem depends on one new parameter, i.e., the SAR focusing velocity. The required signal processing may be tackled in an efficient manner by a hierarchical scheme based on iteratively merging subapertures and increasing the resolution. Rejection of stationary clutter and detection occurs on all levels of increasing resolution. This paper also provides a brief presentation of the Swedish FOA efforts to produce an experimental demonstrator of this multi-function radar system     

基于3DT的空时自适应单脉冲参数估计算法

空时自适应处理(STAP)是机载预警雷达抑制杂波和干扰的一项关键技术,而多普勒三通道联合自适应处理(3DT)是适合工程实现的降维(RD)STAP方法。STAP目标检测后还需进一步估计目标的角度参数,因此将自适应单脉冲(AM)技术引入3DT,提出了一种高精度联合估计目标速度与方位空间角的空时自适应单脉冲算法。理论分析与仿真实验结果表明,当目标多普勒频率偏离检测多普勒单元中心频率时,该算法能同时减少目标多普勒跨越损失和空时导引矢量失配损失,进而提高输出信杂噪比(SCNR),改善目标测角精度。     

Improved Three Subaperture Method for Elevation Angle Estimation

The three subaperture method is a technique for estimating the arrival angles of two targets located in the main beam of a radar. The problem of estimating the arrival angle of a target in the presence of multipath is considered, and it is shown how the accuracy of the three subaperture method can be improved by making use of the information that the amplitude of the direct ray is larger than that of the reflected ray.     

Detection of Target Multiplicity Using Monopulse Quadrature Angle

The feasibility of using the indicated quadrature angle of arrival of a monopulse radar to discriminate a single target from multiple targets, separated in angle within a radar resolution cell, is investigated. The analysis is performed for steady (fixed) and Rayleigh fluctuating targets which cover a broad range of target characteristics. In both cases, the interfering signals due to noise and clutter in the sum and difference monopulse channels are assumed to be independent, zero-mean Gaussian processes. Detection and false alarm probabilities are evaluated analytically and the receiver operating characteristics are obtained for both fixed and fluctuating target cases. It is shown that multiple targets can be discriminated from a single target condition by integrating the indicated monopulse quadrature angle of arrival from several independent pulses. It is also shown that the probability of detecting multiple targets increases as the fluctuation in the target radar cross section decreases, approaching the fixed amplitude case in the limit.     

Monopulse DOA estimation of two unresolved Rayleigh targets

This paper provides for new approaches to the processing of unresolved measurements as two direction-of-arrival (DOA) measurements for tracking closely spaced targets rather than the conventional single DOA measurement of the centroid. The measurements of the two-closely spaced targets are merged when the target echoes are not resolved in angle, range, or radial velocity (i.e., Doppler processing). The conditional Cramer Rao lower bound (CRLB) is developed for the DOA estimation of two unresolved Rayleigh targets using a standard monopulse radar. Then the modified CRLB is used to give insight into the boresight pointing for monopulse DOA estimation of two unresolved targets. Monopulse processing is considered for DOA estimation of two unresolved Rayleigh targets with known or estimated relative radar cross section (RCS). The performance of the DOA estimator is studied via Monte Carlo simulations and compared with the modified CRLB     

Target Identification by Natural Resonance Estimation

This paper presents a target identification method based on an estimation of the natural frequencies of oscillation in transient radar signatures. The emphasis is placed upon signal modeling and estimation ation strategy rather than relating resonance locations to physical structures. Salient features of this identification method are: 1) target aspect angle is not needed, 2) multiple targets of the same type can be illuminated simultaneously, and 3) bandpass interrogation ion pulses can be used. The latter feature is compatible with existing radar facilities. The method is applied to some simulated transfer functions, and factors affecting estimate accuracy are discussed.     

Performance of a Two-Sample Mann-Whitney Nonparametric Detector in a Radar Application

The detection of signals in an unknown, typically non-Gaussian noise environment, while attempting to maintain a constant false-alarm rate, is a common problem in radar and sonar. The raw receiver data is commonly processed initially by a bank of frequency filters. The further processing of the outputs from the filter bank by a two-sample Mann-Whitney detector is considered. When the noise statistics in all filters are identical, the Mann-Whitney detector is distribution free, i. e., the false-alarm probability may be prescribed in advance regardless of the precise form of the noise statistics. The primary purpose of this paper is to demonstrate the potential advantage of nonparametric detectors over conventional detectors. The signal detection performance of the Mann-Whitney detector is compared to that of an ordinary linear envelope detector plus integrator in the presence of Gaussian and several hypothetical forms of non-Gaussian noise. This comparison is made for both uniform and nonuniform distributions of noise power across the filter bank. Besides providing a much more constant false-alarm rate than the conventional detector, the Mann-Whitney detector's signal detection performance is found also to be much less sensitive to the form of the noise statistics. In one case, its detection sensitivity is found to be 11 dB better than that of the conventional detector. Even when the noise power density is made moderately nonuniform across the filter bank, the detection performance of the Mann-Whitney detector is found not to be significantly affected.     

Optimal Target t Designation Techniques

Studies of signal processing techniques are presented for achieving optimal autonomous acquisition of stationary targets located in a moderately intense nonhomogeneous radar ground clutter background. The process of target acquisition comprises three basic functions: 1) target detection, 2) target selection or designation, and 3) reacquiring the target for tracking. It is the second of these functions, i.e., autonomous designation of a target, that is the subject of this discussion. Theoretical analyses and predictions of the probability of correct target designation for two acquisition search methods are presented and compared with results achieved using real radar imagery.     

Multipath Limitations on Low-Angle Radar Tracking

This paper investigates the problem of tracking targets at a low elevation angle in the presence of specular and diffuse multipath. Quantitative estimates are derived of the elevation angles, and hence, range, at which targets of specified height can be accurately tracked. A parametric approach is followed in which the long-standing uncertainty of how terrain forward-scatters at low grazing angles is recognized at the outset. Particular attention is given to the effects of target motion which permit rejection of multipath components falling outside the radar tracker's passband. The results are presented in a form which can be readily applied to a spectrum of radar trackers with differing requirements. The limited experimental ental data on the specular and diffuse scattering parameters for several generic types of terrain are applied to estimate the significance of multipath under different situations and to indicate specific areas in which additional experimental data are critically needed.     

空舰导弹获取舰艇编队形状能力研究

利用舰艇编队形状(SSF)的预定目标选择方法(简称SSF方法)比传统方法具有更好的预定目标选择能力.为了检验SSF方法的适用性,研究了空舰导弹(ASM)获取SSF的能力.首先推导了末制导雷达(TGR)最小方位角搜索范围模型.据此模型可在给定发射距离下计算合适的末制导雷达方位角搜索范围,此方位角搜索范围既能保证编队录取概...     

Refraction Error in Measurement of Angle of Arrival with the Radio Interferometer

The ``extra-path' error in the measurement of angle of arrival with the radio interferometer is analyzed as a function of target coordinates and baseline B for an exponential atmosphere. By treating the error rather than the measurement and by formulating the error in terms of well-known radar refraction parameters, the necessity for numerical integrations characteristic of earlier approaches is avoided. The table of computed errors shows that angle of arrival can be measured to an accuracy of 0.01 mrad for B?500 meters.