共查询到20条相似文献,搜索用时 46 毫秒
1.
结合无人战斗机的作战特点,在普通战斗机原始对数法的基础上,发展了一种用于无人战斗机的综合效能评估模型。该模型综合考虑了可靠性、使用环境、适用于无人战斗机的新式武器以及操作人员等因素的影响,并对某型无人战斗机作战效能进行了计算,计算结果与实际情况比较符合,而且该计算模型适应性较强,既可以对无人战斗机进行简易评估,也可以进行详细估算。 相似文献
2.
3.
杨戈 《飞机设计参考资料》2003,(1):12-20,36
通过对美国21世纪初3种主力战斗机的技术特点和作战性能要求的分析,指出了21世纪初的战斗机应注重改善战斗机的低可探测性,高机动性和敏捷性,超音速巡航性能、态势感知能力和可灵活剪切的攻击能力等。 相似文献
4.
针对现有超视距空战威胁估计模型的不足,提出了一种新的基于模糊逻辑的超视距空战威胁估计模型。该模型以机载中远程空空导弹攻击区、雷达搜索区性能参数以及双方战术几何关系、相对运动趋势作为评估对象进行模糊化,设计了角度优势、距离优势推理模块,并以二者的加权和作为当前空战态势的优势指数。模型较为全面反应了空战态势与参战飞机的作战能力,可为超视距多机协同攻击多目标空战时的目标分配、战术选择提供参考。仿真结果验证了模型的有效性。 相似文献
5.
轨迹预测是空战态势感知中的关键问题。针对传统轨迹预测方法模型简化程度大、预测精度偏低的问题,提出了基于Elman神经网络的战斗机空战轨迹预测方法。首先,以一对一空战为背景,建立了基于Elman神经网络的目标机空战轨迹预测模型;其次,在利用空战训练测量仪(ACMI)中记录的空战数据基础上,选取了一对一空战轨迹,并构建了训练样本和测试样本;然后,通过仿真分析了不同算法进行轨迹预测的精度。结果表明,与传统粒子滤波算法相比,Elman网络模型预测误差更小、预测效果更好,可以更加准确地进行目标机空战轨迹的预测。 相似文献
6.
黄志澄 《流体力学实验与测量》1998,12(2):1-8
首先分析了新军事革命对空中对抗途径的影响,指出21世纪初的空中力量将由有人机和无人机混合组成。接着分析了无人机的发展趋势,指出国外在发展无人侦察机和有人战斗机的基础上,正在发展无人战斗机。 相似文献
7.
综述了飞机结构安全系数的概念形成和演化过程以及影响因索,探讨了无人战斗机的结构低安全系数静强度设计可行性;提出了无人战斗机的不同结构材料和不同结构部位对应低安全系数的取值原则。 相似文献
8.
空中新杀手——研制中的UCAV无人战斗机 总被引:1,自引:0,他引:1
美国、英国、法国、以色列,甚至日本等国都正在把越来越多的注意力投向无人战斗机的研制。例如英国空军正在考察用无人战斗机作为2015年前将退役的“狂风”GR4的替代后继机,美国国防部一直在加大对无人战斗 级官员甚至声称,如果“联合攻击战斗机”计划最后因为技术或经费上的原因而流产,他们将会让国防部采购办公室将计划改为JSF无人机计划,用来替代现在的F-16和F-18,遂行对地攻击任务。 相似文献
9.
10.
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:3,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
14.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
15.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
16.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
17.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
18.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献
19.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献