共查询到20条相似文献,搜索用时 250 毫秒
1.
2.
针对含有不确定干扰项的吸气式高超声速飞行器模型,分别设计了基于反馈线性化的速度控制器和基于反步法的航迹控制器,以实现对速度和航迹角参考信号的稳定跟踪。通过指令滤波器得到俯仰角的实际跟踪指令及其一阶、二阶微分信号,可直接设计升降舵控制指令,在解决了虚拟控制量求导"复杂性爆炸"问题的同时,减少了反推计算步数,从而达到提高系统动态性能和优化控制器结构的目的。基于LaSalle不变集原理和Lyapunov理论设计的自适应更新律保证了系统的稳定性。仿真结果表明,所设计的控制器在飞行器存在不确定干扰的情况下仍能满足对参考信号跟踪性能的要求。 相似文献
3.
4.
针对高超声速飞行器在飞行控制过程中存在外界干扰以及考虑执行器的动态特性等问题,结合飞行器纵向模型的特点,考虑舵的动态特性,分别设计了基于动态逆的速度控制器和基于指令滤波器采用Backstepping控制方法的高度控制器。模糊自适应系统用来在线辨识飞行器模型由于气动参数的变化而引起的不确定性。运用Lyapunov理论分析闭环系统的稳定性,证明了包含跟踪误差在内的所有信号满足半全局一致稳定。最后通过仿真对控制器的控制效果进行验证,得到了较为满意的控制效果。 相似文献
5.
输入受限的吸气式高超声速飞行器自适应Terminal滑模控制 总被引:2,自引:0,他引:2
针对吸气式高超声速飞行器的纵向运动模型,研究了输入受限时控制系统的设计问题,提出了一种内外环相结合的自适应Terminal滑模控制方法.以迎角和俯仰角速度作为内环控制对象,考虑到气动弹性模态和外部干扰,采用反步设计方法,设计出升降舵的自适应Terminal滑模控制律;以飞行速度作为外环控制对象,采用动态逆设计方法,设计出输入燃料当量比的动态逆自适应控制律,同时利用多层神经网络逼近控制律的饱和特性.基于Lyapunov稳定性理论,证明了采用此控制策略可以保证闭环控制系统的所有信号都是指数收敛至系统原点的一个有界邻域内,同时飞行器的气动弹性模态都是渐近稳定的.仿真结果表明,此控制策略能有效地处理吸气式高超声速飞行器在纵向运动过程中控制输入饱和受限的约束,在完成控制目标的同时,具有良好的过渡过程品质. 相似文献
6.
7.
应用保护映射理论的高超声速飞行器自适应控制律设计 总被引:2,自引:2,他引:0
针对高超声速飞行器包线范围广、参数变化大的控制需求,应用保护映射理论提出一种高超声速飞行器的自适应控制律设计方法。首先建立整个飞行包线内的线性变参数(LPV)模型,在参数变化边界点设计一个初始的控制结构和参数,然后基于保护映射理论分析初始控制结构使闭环系统稳定的参数范围,通过迭代自动获取整个包线内满足性能指标的控制参数,进而通过多项式拟合设计出高超声速飞行器自适应控制律。所提出的方法能够根据初始控制结构自动寻找一系列满足性能要求的控制器参数,并确定这些控制参数满足闭环系统稳定的设计范围。仿真结果表明,所设计的自适应控制律能够确保高超声速飞行器大包线的设计要求,实现闭环系统的鲁棒稳定。 相似文献
8.
9.
10.
针对含有未建模动态的微小型直升机非线性模型,设计了基于反步法和自适应模糊系统的自主飞行控制器.该控制器包含两个回路:航迹控制外回路和姿态控制内回路.外回路通过旋转矩阵实现对内回路姿态的控制,而非传统的欧拉角或姿态四元数.控制器采用自适应Takagi-Sugeno(TS)模糊系统在线补偿系统未建模动态的影响,并利用反步法完成控制器综合.所设计的算法在确保整个控制系统稳定性的同时又可保证系统能够有效应对未建模动态的影响.系统仿真结果表明,在盘旋上升飞行模态下控制系统能够快速准确地跟踪预设轨迹,并且具有良好的鲁棒性能. 相似文献
11.
航迹控制回路是无人机自动控制飞行中的重要环节,它涉及无人机的姿态、航向和飞行状态等重要参数的变化。根据飞行控制的基本控制律实现了无人机在复杂航迹条件下的安全飞行控制,模拟出无人机在自动控制下的航迹、盘旋和着陆等的飞行任务。采用面向对象方法设计了基于堆栈的通用化的航线管理类。并分析了无人机在手动操作切换到自动控制方式时寻找航迹点飞行中可能出现的问题,提出了相应的解决方案。 相似文献
12.
改进型LQR方法在飞机控制律设计中的应用 总被引:1,自引:0,他引:1
阐述了线性二次型状态反馈(LQR)理论在飞行控制系统设计中的优势。针对现代飞机飞行控制系统非线性、多回路和强耦合的特点,典型的介绍了纵向飞行控制系统的设计过程。选择反馈信号以及升降舵等变量作为输出量.使传统LQR最优控制中对加权阵Q和R的选择变为对降维的加权阵Q的选择,并通过真实飞行速度进行动态调参,最后,通过仿真验证了该方法的正碜性和实用性。 相似文献
13.
研究了直升机由悬停转前飞的过渡飞行中高度和速度变化。首先研究了计算方法,并以 S A365 N 型直升机为例进行了核算比较,验证了分析方法的可行性和合理性;最后对一般直升机在各种发动机故障状态及操纵输入进行了分析计算, 得出了一些有意义的结论,这些结论将为今后的实际飞行提供有益的指导。 相似文献
14.
高超声速飞行器气动力/热/结构多场耦合的一个典型效应是热弹性变形,从而引起气动力变化及配平变化,并进一步改变飞行弹道与控制方案。将FL-CAPTER高超声速多场耦合分析软件拓展至飞行力学领域,建立了考虑气动力/热/结构多场耦合效应影响的弹道模拟新方法,并针对给定舵偏角下自主配平控制的助推-压缩楔组合体外形,开展不同耦合时间尺度下的飞行弹道特性研究,初步探讨分析了多场耦合效应对飞行弹道的影响。研究结果表明:对于助推-压缩楔组合体外形,考虑多场耦合效应后,变形将带来配平迎角增大,飞行器升力、阻力同时增大,升阻比降低,弹道飞行高度增加,飞行马赫数降低,航程变短等一系列影响;同时,气动/弹道耦合计算时间步长的选取对弹道仿真结果存在较大影响,当步长选取过大时,会带来非物理振荡,导致计算结果失真;所提出的基于变形量回溯插值技术的双时间步修正方法能够有效提高弹道仿真精度,削弱因时间步长选取过大造成的非物理振荡。相关研究对认识多场耦合效应与飞行弹道的耦合机理及弹道设计等可提供重要参考。 相似文献
15.
16.
基于喘振裕度估计模型的发动机高稳定性控制 总被引:4,自引:2,他引:2
为解决超机动飞行中发动机喘振裕度不可测量的难题,提出一种发动机喘振裕度的建模方法.喘振裕度的模型分为常规飞行时的无畸变模型与超机动飞行时的损失量模型两部分.无畸变模型是基于喘振裕度特征选择算法筛选最优模型输入,以非线性拟合方法建模实现;损失量模型则基于在线攻角预测模型实时评估发动机进口畸变度,进而计算获得.而后利用上述估计模型对发动机的稳定性进行实时预测,在不改变发动机原控制回路的基础上,对涡轮落压比控制指令进行喘振损失补偿,实现高稳定性控制.最后,通过大攻角机动飞行的数字仿真,验证了上述方案可以准确控制发动机喘振裕度在11%~13%,保证了发动机工作的稳定性和高效性. 相似文献
17.
对于较大的飞行包线,飞机对象的参数变化剧烈,采用常规控制方法往往不能保证在较大飞行包线范围内均取得良好的控制效果,基于此,提出了一种新型的自组织模糊控制方法,该对系统内部参数的剧烈变化具有很强的适应性,然后对飞机飞行控制系统的控制律设计进行了研究。用所提出的模糊控制方法设计了部分控制律,最后以某型国产飞机对象,采用飞机六自由度非线性仿真模型,在一个较大的飞行包线范围内,进行了飞行仿真,取得了良好的 相似文献
18.
《Aerospace Science and Technology》2000,4(5):321-336
Based on wind tunnel data the origin and the influence of active rotor control on the wake geometry in the rotor disk are determined. The test data show that the changes in blade-vortex interaction locations due to higher harmonic control are not primarily caused by different blade motions but mainly from different vortex flight paths. Using combined momentum and blade element theory, a model for the induced velocities caused by higher harmonic control is derived. The integration of the vortex flight path within this induced velocity field provides displacements of the vortices that lead to significant changes in the blade-vortex interaction locations. The results are validated by wind tunnel data, and it is proven that the influence of higher harmonic control on vortex geometry and therewith the noise emission characteristics can be predicted using this methodology. Thus the time consuming procedure of computing the wake geometry by free-wake analysis may be omitted for parameter variation studies, since the wake geometry can be predicted approximately in advance. 相似文献
19.
Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces 总被引:2,自引:2,他引:0
With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions. 相似文献
20.
《中国航空学报》2022,35(10):95-105
The Stopped-Rotor (SR) UAV combines the advantages of vertical take-off and landing of helicopter and high-speed cruise of fixed-wing aircraft. At the same time, it also has a unique aerodynamic layout, which leads to great differences in the control and aerodynamic characteristics of various flight modes, and brings great challenges to the flight dynamics modelling and control in full-mode flight. In this paper, the flight dynamics modelling and control method of SR UAV in full-mode flight is studied. First, based on the typical flight profile of SR UAV when performing missions, using the theory and method of fuzzy mathematics, the T-S flight dynamics model of SR UAV in full-mode flight is established by synthesizing the flight dynamics model of each flight mode. Then, an explicit model tracking and parameter adjusting control system based on fuzzy theory is designed to enhance the stability of the inner loop of SR UAV in full-mode flight, which effectively reduces the coupling between axes and improves the control quality of the system. Finally, the outer loop control system is designed by using classical control method, and the control law of SR UAV in full-mode automatic flight is obtained. The simulation results show that the proposed control system design method is feasible and effective, which lays a solid foundation for the subsequent engineering implementation of the SR UAV. 相似文献