共查询到19条相似文献,搜索用时 187 毫秒
1.
计算机集成工程和制造系统(简称CIEM)是开发一个满足飞机研制需要的计算机软件集成系统。本文介绍了该项目中采用数据库系统的方案。它包括了在航空领域中数据模式的提炼(定义)和采用数据库及文管系统二者来满足系统对数据管理的要求。经过测试和运行,证明CIEM系统的数据库系统研制是成功的。 相似文献
2.
3.
4.
5.
6.
7.
浦东国际机场环境、建设的和谐让人流连忘返,机场按时顺利地通航和信息系统特别是信息集成系统的成功开通和平稳运行更是得到了世人的赞誉。浦东机场的信息集成通过主机集成,数据库模成,网络集成,应用系统集成四个层次的集成来实现的,是以中央数据库为核心,依托高速ATM网络,采用访问中央数据库的标准接口协议CDI技术集成了十六个子系统或外部接口,实现了系统集成化和信息传递自动化,为提高对旅客和航空公司及各驻场单位的服务质量创造了条件。 相似文献
8.
9.
1994年11月上旬,中国航空工业总公司在沈阳飞机设计研究所召开“CIEM系统工程成果鉴定会”。会议由总公司科技局主持。鉴定委员会有26人组成,由中国工程院管德院士任组长、马业广研究员和夏人伟教授任副组长。会议期间,代表们听取了有关CIEM系统工程研制的系统项目总结和专题技术总结及用户使用意见等报告。与会者并 相似文献
10.
对集成问题,提出了概念的定义,探讨了STEP标准的应用方法,建立了基于STEP的集成系统框架。该系统框架具有开放式的体系结构,有良好的可集成性和可扩展性,支持与现有系统的集成、支持零件设计制造的全过程、并已部分地得到实现和验证。并介绍集成系统的数据模型。 相似文献
11.
12.
涡轴发动机/直升机综合控制仿真平台设计 总被引:8,自引:5,他引:3
建立了UH-60直升机/T700涡轴发动机综合控制数字仿真平台。基于VC++环境开发了包含UH-60直升机/T700涡轴发动机综合实时模型的上位机程序,与运行机载涡轴发动机+旋翼实时模型及在线优化控制模式的下位机程序。两者基于TCP/IP协议实时通讯,可进行模拟实际直/发综合优化控制的数字仿真实验。在该数字仿真环境下,分别给出了提高直升机常规飞行性能的多种优化控制模式仿真、变旋翼转速优化控制以及快速功率跟随控制模式仿真,充分表明该平台可为新一代直/发综合系统的开发研制提供一个可靠的前期数字仿真验证。 相似文献
13.
The authors present the communication system architecture for air traffic management and weather information dissemination as viewed within the context of the overall National Airspace System (NAS) and the services it provides. This presents the architecture in the 2015 time frame when the final phases of transition take place from analog voice to digital data exchange of common data via integrated networks. The results of this transition are an integrated collection of systems and procedures that efficiently use the capacity of the NAS while balancing access to all user classes and maintaining the highest levels of safety. Efficient collaboration among users is built on a foundation of common data. This information base provides common situational awareness to all participants. All users are accommodated and will receive benefits commensurate with equipage level. This architecture development provides a technical framework for decision-making, research, and analysis of communication technologies 相似文献
14.
15.
针对舰空导弹武器系统协同作战能力试验中亟需解决的协同目标指示难题,借鉴美海军实际经验,提出了不动用舰艇条件下的协同目标指示模拟总体方案。介绍了协同目标指示模拟采用的测控信息预处理、时空同步和信息融合跟踪方案,重点研究了测控信息实时精度匹配方案,提出了基于误差合成分配技术的卡尔曼滤波实时精度匹配方法,并分析了协同目标信息传输性能需求。运用Simulink仿真技术验证了提出的目标指示模拟方案的有效性。 相似文献
16.
单斜热丝测量叶轮机内三维流动 总被引:1,自引:0,他引:1
本文改进了单斜热丝测量三维流动的计算处理方法,其特点是精度高、气流角度测量范围宽。测量中,置斜热丝于三个以上角度位置,借助高速数据采集系统和锁相采样平均技术,进行采样处理,再用本文发展的程序,计算三维速度平均量。用这种方法,成功地测出了轴流压气机转子出口周期性三维流场。对校准风洞流场的测量核实表明,速度测量误差不超过1%,角度测量误差不超过1°。 相似文献
17.
有限平板绕流Monte—Carlo方法仿真 总被引:1,自引:0,他引:1
本文采用直接仿真Monte-Carlo方法求解有限长平板绕流等问题。本方法是通过计算机跟踪仿真分子的运动来实现数值模拟的。仿真分子间的碰撞计算由统计抽样确定。碰撞模型分别选用了硬球分子模型和负幂律分子模型。仿真分子与固壁作用采用由完全扩散反射和镜面反射按比例混合组成的模型。为了检验方法的可靠性,还计算了激波结构和Rayleigh问题等一维流动,二维计算采用同步并行程序。数值结果表明直接仿真Monte-Carlo方法能够较好地模拟稀薄气体力学中的一些问题。对于二维计算,所花费的机时和所需的内存均在国内机器所允许的范围内。 相似文献
18.
Margolis M.D. Messenger G.C. Fitch S.H. 《IEEE transactions on aerospace and electronic systems》1972,(6):771-779
A hardness assurance program suitable for a retaliatory or deterrent missile system is discussed. The program consists of three phases: the establishment of suitable controls and screens to ensure piece part hardness, a supplier data monitoring program to measure hardness related parameters in a timely fashion to obtain advanced warning of potential problems, and a hardness assurance verification testing (HAVT) program to periodically measure the radiation response of parts, circuits, subsystems, and systems on a sample basis to ensure proper functioning in simulated radiation environments. All of the data relevant to hardness assurance is stored in computer memory and routinely interrogated with programs which compare current results with the engineering baseline data and other data from preceding lots. Other computer programs enable statistical estimation of system response to the radiation environment with confidence based on the expanding data base provided by the HAVT program. 相似文献
19.
This paper proposes a generic high-performance and low-time-overhead software control flow checking solution, graph-tree-based control flow checking (GTCFC) for space-borne commercial- off-the-shelf (COTS) processors. A graph tree data structure with a topology similar to common trees is introduced to transform the control flow graphs of target programs. This together with design of IDs and signatures of its vertices and edges allows for an easy check of legality of actual branching during target program execution. As a result, the algorithm not only is capable of detecting all single and multiple branching errors with low latency and time overheads along with a linear-complexity space overhead, but also remains generic among arbitrary instruction sets and independent of any specific hardware. Tests of the algorithm using a COTS-processor-based onboard computer (OBC) of in-service ZDPS-1A pico-satellite products show that GTCFC can detect over 90% of the randomly injected and all-pattern-covering branching errors for different types of target programs, with performance and overheads consistent with the theoretical analysis; and beats well-established preeminent control flow checking algorithms in these dimensions. Furthermore, it is validated that GTCGC not only can be accommodated in pico-satellites conveniently with still sufficient system margins left, but also has the ability to minimize the risk of control flow errors being undetected in their space missions. Therefore, due to its effectiveness, efficiency, and compatibility, the GTCFC solution is ready for applications on COTS processors on pico-satellites in their real space missions. 相似文献