共查询到19条相似文献,搜索用时 81 毫秒
1.
有限元分析方法在振动工装设计中的应用 总被引:2,自引:0,他引:2
主要提出了惯导系统振动工装设计方法,使用UG软件建立振动工装的三维模型,运用有限元分析方法,对振动工装进行了模态分析,根据分析结果对振动工装进行了优化和改进设计。 相似文献
2.
叙述了把气动装夹应用于试验工装,组成自动、半自动的工装夹具,从而给试验工作带来定位准确、快速装夹、维护方便等诸多优点。文中列举分析了一些利用气动装夹的试验范例,通过对原有夹具及改进后夹具的图解对比分析,进一步阐述气动装夹的利用价值及其广阔的应用空间。 相似文献
3.
4.
通过研制、改进焊接工装 ,完善装配、焊接工艺 ,基本上解决了低温贮箱装配错位和对合间隙不均匀问题 ,提高了焊缝一次交检合格率 ,大大减少了贮箱焊接后的变形量 ,提高了贮箱环焊缝的质量和可靠性。 相似文献
5.
6.
高频振动夹具的设计改进 总被引:1,自引:0,他引:1
针对振动工装夹具在高频振动中出现的问题,通过对振动理论进行深入研究,找出工装夹具设计上的不足,并归纳总结了一些设计经验,重新设计了工装夹具,满足了使用要求。 相似文献
7.
简述了工装标准化在型号产品研制中的作用、目的和主要任务,分析了开展工装标准化的内容及其主要工作,并根据型号产品的生产实际和特点,对工厂如何做好工装标准化工作提出了看法。 相似文献
8.
9.
工装在方舱大板粘接中的作用及影响 总被引:1,自引:0,他引:1
本文对大板粘接工艺及粘接用胶粘剂的性能和特点作了介绍,对加压工装及加热工装在大板粘接过程中的作用作了分析,提出了工装设计的依据和要求,并指出加压工装和加热工装是保证大板粘接质量和提高生产率的前提。 相似文献
10.
11.
介绍了采用的磁场、磁路、磁阻以及磁场分布理论,给出了用于小长径比零件磁粉检测专用工装的设计规范,利用该工装可明显提高发动机机架零件磁粉检测的灵敏度。该项技术已应用于发动机无损检测之中。 相似文献
12.
通过对某型号火箭薄壁半球零件的加工,对该零件在数控加工时所需的工艺流程的安排、工装的设定、刀具的选用以及数控程序的编制作了阐述。介绍了以这个零件为基础库,加工其它类似半球类零件的情况。 相似文献
13.
在进行振动试验时,因产品种类及用途不同,尺寸大小也不同,试验设备台面尺寸又为固定尺寸,必然会遇到产品工装超出振动台扩展台面的情况,通过简化工装模型建立材料的挠曲方程,结合振动与材料力学的特征,从伸出长度及疲劳损伤两个角度论证了这种大尺寸矩形工装的安全使用范围,并且以常见的转接平板型夹具及锥体形夹具为例,讨论了在工装尺寸超过振动台面时,以上这两种工装的应用情况,以结论的形式确定了安全使用的范围从而为此类情况的出现,提供了有价值的工程数据。 相似文献
14.
15.
《Acta Astronautica》2013,82(2):570-577
Anisogrid composite shells have been developed and applied since the eighties by the Russian technology aiming at critical weight structures for space launchers, as interstages and cone adapters. The manufacturing process commonly applied is based on the wet filament winding. The paper concerns with some developments of design and manufacturing recently performed at the Italian Aerospace Research Center on a cylindrical structural model representative of this kind of structures. The framework of preliminary design is improved by introducing the concept of suboptimal configuration in order to match the stiffness requirement of the shell and minimise the mass, in conjunction with the typical strength constraints. The undertaken manufacturing process is based on dry robotic winding for the lattice structure and for the outer skin, with the aid of usual rubber tooling and new devices for the automated deposition strategy. Resin infusion under vacuum bag and co-cure of the system of ribs and skin is finally applied out-of-autoclave, with the aid of a heated mandrel. With such approach an interstage structural model (scale factor 1:1.5) has been designed, manufactured and tested. Design requirements and loads refer to a typical space launcher whose baseline configuration is made in aluminium. The global mechanical test of the manufactured structure has confirmed the expected high structural performance. The possibility to reach substantial weight savings in comparison with the aluminium benchmark has been fully demonstrated. 相似文献
16.
纤维复合材料中孔隙的起因评述 总被引:4,自引:0,他引:4
文中介绍美国麦道宇航公司对纤维复合材料中产生孔隙原因的评述。热固性树脂基复合材料固化成型过程中产生孔隙的最简单机理是与挥发物的蒸气压相关联的。如果树脂凝胶前挥发物的蒸气压力超过树脂流体的压力,则会在层板中生成孔隙,而且孔会长大。介绍了影响树脂流体压力的试验结果,并讨论了诸如树脂体系化学组成,树脂体系的配置和预浸操作、铺层、加压以及固化工艺等因素对孔隙形成、长大的影响。 相似文献
17.
18.
19.
The multi-cell communication satellite concept allows an efficient use of the geostationary orbit and a large reduction of the bit transmission cost, as a Bell-type (phased array), multiple mobile narrow beams arrangement with SS-TDMA.It has a flat hexagonal flying-saucer shape, being erected in a low altitude orbit, through an automatic assembly process of a large number of quasi-identical hexagonal cells. Each cell has independent power supply, thrusters, RF modules etc….Total assembly requires 10 ARIANE V or 4 SHUTTLE launches. An automatic tooling assembly using simple iterative manoeuvers is used to obtain the final shape, from initial cylindrical packages.Transfer into geostationary orbit is provided by low-thrust bi-propellant units attached to the cells, and released after burn-out. Assembly and transfer duration is about 6 months.Total traffic to 1000–2000 towns being 100 Gbits/s, the expected reduction of bit-transmission cost relative to year 1981 is 75–100 fold. 相似文献