共查询到20条相似文献,搜索用时 281 毫秒
1.
概述了表面工程技术在航空发动机技术进步,尤其是在提高航空发动机效率、使用寿命和可靠性,改善经济性等方面中的重要作用;对比分析了国内外航空发动机表面工程技术水平间的差距,并对国内的技术现状和问题进行了归纳,着重指出了制约表面工程技术在国内航空发动机领域工程应用的关键因素;最后结合国内航空发动机研制和未来发展需要,从设计角度提出了表面工程关键技术需求及发展建议。 相似文献
2.
航空发动机整机和部件仿真是航空发动机设计与研究的常规手段,是短周期研制先进水平航空发动机的重要环节和手段。数值缩放技术可以将基于高精度模型求解的部件特性用于整机性能分析,在有限的计算资源下提高航空发动机整机仿真精度,是实现航空发动机整机和部件高精度仿真的关键技术之一。同时数值缩放技术可以使部件设计在航空发动机整机环境中得到快速、全面的评估与分析,提高航空发动机设计的可信度,降低开发成本与周期。梳理了国内外航空发动机数值仿真技术的发展趋势,回顾了数值缩放技术的发展及在实际研究中的应用情况,分析、总结了数值缩放技术的三种实现方法及现阶段数值缩放技术应用中存在的问题,提出了我国数值缩放技术发展需重点关注的方向。 相似文献
3.
4.
对航空发动机研究和发展规律的认识 总被引:3,自引:2,他引:3
探讨了世界上航空发达国家航空发动机技术加速发展的态势。分析了甸航空动力技术预先研究的现状及存在问题。加深了对航空发动机发展规律的认识。对如何振兴航空、动力先行,把我国航空发动机搞上去,走自主创新的发展道路提出了建议。 相似文献
5.
6.
7.
航空发动机叶片的激光冲击强化研究 总被引:4,自引:1,他引:3
简述了当前航空发动机叶片在使用过程中存在的问题和国内外激光冲击强化技术在航空领域中的发展情况。研究了激光冲击强化在某型发动机叶片强化中的应用,总结了激光冲击强化技术与传统强化工艺相比所具有的优势。实验证明冲击强化在航空发动机叶片维修应用是可行性的。 相似文献
8.
'93欧洲推进会议谈航空材料与工艺陈闻去年6月在英国Bath由英国皇家学会组织召开了为期两天的欧洲推进会议,讨论了新材料及制造工艺对未来航空发动机设计的影响。重点围绕工艺过程、表面工程、低温复合材料、陶瓷、金属间化合物以及发动机的使用要求等问题。设计... 相似文献
9.
10.
扭转我国航空发动机落后的被动局面,是目前中国航空工业面临的最严峻的问题之一。为此,本刊记者专访了我国航空发动机专家、中国工程院院士刘大响。他从航空发动机的战略地位、发达国家航空发动机的发展路径谈起,结合我国当前的实际情况,对我国航空发动机的未来发展提出了自己的思考和建议。 相似文献
11.
12.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
13.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
14.
15.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
16.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
17.
18.
19.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
20.
基于马赫数分布可控曲面外/内锥形基准流场的前体/进气道一体化设计 总被引:4,自引:1,他引:3
提出了一种高超声速飞行器乘波前体的外锥形基准流场设计方法,在锥面马赫数分布规律给定的条件下,通过有旋特征线法实现反设计,提高了基准流场设计的灵活性。该基准流场通过锥形"下凹"弯曲激波和波后等熵压缩波系压缩气流,可以在较短的长度内完成高效压缩。基于反正切马赫数分布外锥形基准流场设计的乘波前体具有较高的容积率,乘波特性良好且出口均匀,设计点时有黏升阻比为1.89。另外,基于该乘波前体和马赫数分布可控的内收缩进气道给出了一种双乘波的前体与进气道一体化设计方案,实现了内外流分别独立乘波,充分发挥了乘波前体和内收缩进气道的各自优势。 相似文献