Polar format algorithm for bistatic SAR

Matched filtering (MF) of phase history data is a mathematically ideal but computationally expensive approach to bistatic synthetic aperture radar (SAR) image formation. Fast backprojection algorithms (BPAs) for image formation have recently been shown to give improved O(N/sup 2/ log/sub 2/N) performance. An O(N/sup 2/ log/sub 2/N) bistatic polar format algorithm (PFA) based on a bistatic far-field assumption is derived. This algorithm is a generalization of the popular PFA for monostatic SAR image formation and is highly amenable to implementation with existing monostatic image formation processors. Limits on the size of an imaged scene, analogous to those in monostatic systems, are derived for the bistatic PFA.     

一种稳健的利用分布式小卫星获取宽域、高分辨SAR图像的方法

 传统星载合成孔径雷达(SAR)受最小天线面积条件的限制，其横向分辨率与测绘带宽度相矛盾，采用编队飞行的分布式小卫星SAR体制，可解决这一矛盾，即能够同时获得大测绘带、高分辨率的地面场景的SAR图像。主要研究如何在误差环境下抑制由小天线引入的多普勒模糊的信号处理方法。该方法利用子空间投影技术对导向矢量进行精确估计，在小卫星存在基线及其他误差时仍然能够稳健地恢复高分辨的二维SAR图像。     

机动目标的逆合成孔径雷达成像

 逆合成孔径雷达(ISAR)和合成孔径雷达 (SAR)都是利用目标 (场景)与雷达的相对运动,提高横向分辨率,实现对目标 (场景 )的成像。SAR的运动方是雷达平台,可控制作平稳飞行,且用仪器测校其偏离误差;ISAR的运动方通常是非合作目标,运动不受控制,且难以精确测量。当目标作机动飞行时,以目标作固定基准,雷达等效地在空间形成流形复杂的逆合成孔径 (阵列 ),对这种情况下成像的问题进行了系统的研究。     

Prescreening during image formation for ultrawideband radar

Standard radar image formation techniques waste computational resources by full resolving all areas of the scene, even regions of benign clutter. We introduce a multiscale prescreener algorithm that runs as part of the image formation processing step for ultrawideband (UWB) synthetic aperture radar (SAR) systems. The prescreener processes intermediate radar data generated by a quadtree backprojection image former. As the quadtree algorithm iterates, it is resolving increasingly finer subpatches of the scene. After each quadtree stage, the prescreener makes an estimate of the signal-to-background ratio of each subpatch and applies a constant false alarm rate (CFAR) detector to decide which ones might contain a target of interest. Whenever the prescreener determines that a subpatch is not near a detection, it cues the image former to terminate further processing of that subpatch. Using a small database of UWB radar field data, we demonstrate that the prescreener is able to decrease the overall computational load of the image formation process. We also show that the new multiscale prescreener method produces fewer false alarms than the conventional two-parameter CFAR prescreener applied to the completely formed image     

Theory and experiments on hard-limited SAR imaging

Known results in the area of hard-limited array theory are extended and generalized for synthetic aperture radar (SAR) applications in order to obtain a significant reduction of the required transmission channel bandwidth. The results provide a theoretical basis for subsequent numerical experiments related to the SIR-B mission. The SAR signal is hard-limited (at the offset frequency, after the heterodyne process) and filtered, and the restored signal is processed in the conventional way to obtain the image of the pertinent scene. Results of this experiment may be useful in assessing image degradation due to 1-b coding     

Parametric Methods for Strip-Map SAR Doppler Ambiguity Resolution

Physical modeling of the Doppler centroid (DC) can be used to predict synthetic aperture radar (SAR) Doppler ambiguity when antenna attitude is controlled or measured precisely enough. It is shown that the same model proves useful even in the cases of higher attitude uncertainty, if it is combined with suitable adaptive techniques. In this paper, Doppler ambiguity resolution is formulated as a hypothesis testing problem over a domain of integer values that are directly related to the attitude uncertainty. A test statistic is derived from the entire SAR scene using data adaptive processing. A broad class of such adaptive algorithms is analyzed in a unified way, starting from the range-azimuth coupling in the frequency domain and multilook techniques. The analysis includes two well-known and two new multilook methods for Doppler ambiguity resolution. A suitable test statistic is proposed for each of these methods and its dependency on the scene spatial correlation is discussed. Experimental results confirm the robustness of the combined scheme.     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

An improved imaging algorithm for spaceborne MAPs sliding spotlight SAR with high-resolution wide-swath capability

Conventional synthetic aperture radar(SAR) systems cannot achieve both highresolution and wide-swath imaging simultaneously.This problem can be mitigated by employing multiple-azimuth-phases(MAPs) technology for spaceborne sliding spotlight SAR systems.However, traditional imaging algorithms have met challenges to process the data accurately, due to range model error, MAPs data reconstruction problem, high-order cross-coupling phase error and variation of Doppler parameters along the azimuth direction.Therefore, an improved imaging algorithm is proposed for solving the above problems.Firstly, a modified hyperbolic range equation(MHRE) is proposed by introducing a cubic term into the traditional hyperbolic range equation(THRE).And two curved orbit correction methods are derived based on the proposed range model.Then, a MAPs sliding spotlight data reconstruction method is introduced, which solves the spectral aliasing problem by a de-rotation operation.Finally, high-order cross-coupling phases and variation of Doppler parameters are analyzed and the corresponding compensation methods are proposed.Simulation results for point-target scene are provided to verify the effectiveness of the proposed algorithm.     

复杂航迹和起伏地形条件下机载聚束SAR 空变运动补偿

 运动补偿是雷达平台机动飞行条件下合成孔径雷达(SAR)实现精确聚焦成像的前提,而如何精确实现运动误差的空变补偿(误差补偿随目标距离、方位和高度位置的变化而变化)目前还存在很大的挑战。本文提出了一种新的三阶运动补偿方法,能够有效解决复杂雷达航迹和地形起伏条件下运动误差的空变补偿问题。该方法首先以场景中心为参考进行空不变运动补偿,然后以多个子场景中心为参考进行空变运动补偿,最后再利用极坐标格式算法(PFA)统一补偿每个像素的空变误差。仿真数据处理结果验证了本文方法的有效性。     

A technique for enhanced slant range resolution for SAR systems inknowledge-based environment

Synthetic Aperture Radar (SAR) is an airborne (or spaceborne) radar mapping technique for generating high resolution maps of surface target areas including terrain. High resolution is achieved by coherently combining the returns from a number of radar transmissions. The resolution of the images is determined by the parameters of the emissions, with more data giving greater resolution. A requirement of the Microwave Radar Division's SAR radar is to provide classification of targets. This paper presents a technique for enhancing slant range resolution in SAR images by dithering the carrier centre frequency of the transmitted signal. The procedure controls the radar waveforms so they will optimally perform the classification function, rather than provide an image of best quality. It is shown that a Knowledge-Based engineering approach to determining the waveform of the radar gives considerably improved performance as a classifier of targets (of large radar cross-section), even though the corresponding image is degraded     

基于CZT的机载并行双站斜视SAR成像算法

建立了机载并行双站斜视合成孔径雷达(SAR)的几何模型,给出了雷达回波的数学表达式,推导了它的二维频谱并对其特点做了分析。在二维频域内,先用聚焦函数对观测场景中心的点目标做精确成像,然后用Chirp-Z变换(CZT)校正中心点两侧目标回波的距离徙动,再通过方位向逆傅里叶变换得到了雷达图像。该算法利用了CZT能够处理非线性调频信号的特点,简化了处理过程,提高了计算效率和成像精度。仿真实验验证了这种基于CZT的新算法在处理并行双站斜视SAR数据时的有效性。     

Trajectory deviations in airborne SAR: analysis and compensation

This paper concerns the analysis and compensation of trajectory deviations in airborne synthetic aperture radar (SAR) systems. Analysis of the received data spectrum is carried out with respect to the system geometry in the presence of linear, sinusoidal, and general aircraft displacements. This shows that trajectory deviations generally produce spectral replicas along the azimuth frequency that strongly impair the quality of the focused image. Based on the derived model, we explain the rationale of the motion compensation (MOCO) strategy that must be applied at the SAR processing stage in order to limit the resolution loss. To this end aberration terms are separated into range space invariant and variant components. The former can be accounted for either in a preprocessing step or efficiently at range compression stage. The latter needs a prior accommodation of range migration effect. We design the procedure for efficient inclusion of the MOCO within a high precision scaled FT based SAR processing algorithm. Finally, we present results on simulated data aimed at validating the whole analysis and the proposed procedure     

SAR图像匹配制导精度影响因素分析

合成孔径雷达（SAR）具有高分辨率、全天候等优点,是提高精确制导武器制导精度的有力工具。制导精度是精确制导武器的重要性能指标,影响SAR制导系统精度的主要因素有实时图的获取误差及预处理误差、图像匹配误差、惯导测量误差、SAR制导特殊弹道引起的导航制导的误差。概述了SAR图像匹配制导系统精度的相关研究,对比和分析了这些研究和结论,指出了该研究存在的问题和发展方向。     

Phase gradient autofocus-a robust tool for high resolution SARphase correction

The phase gradient autofocus (PGA) technique for phase error correction of spotlight mode synthetic aperture radar (SAR) imagery is examined carefully in the context of four fundamental signal processing steps that constitute the algorithm. We demonstrate that excellent results over a wide variety of scene content, and phase error function structure are obtained if and only if all of these steps are included in the processing. Finally, we show that the computational demands of the fun PGA algorithm do not represent a large fraction of the total image formation problem, when mid to large size images are involved     

Geometric accuracy in airborne SAR images

Uncorrected across-track motions of a synthetic aperture radar (SAR) platform can cause both a severe loss of azimuthal positioning accuracy in, and defocusing of, the resultant SAR image. It is shown how the results of an autofocus procedure can be incorporated in the azimuth processing to produce a fully focused image that is geometrically accurate in azimuth. Range positioning accuracy is also discussed, leading to a comprehensive treatment of all aspects of geometric accuracy. The system considered is an X-band SAR     

Radar beamwidth reduction techniques

It is essential and desirable to get a high resolution echo in a radar image without using a large antenna. On scanning a radar antenna, the target's distribution is smoothed by the antenna beam and a smeared echo appears on the radar display. This paper describes three different types of beam compression radars: subsurface SAR; correlation array radar; and inversion processed radar. The experimental results show that the beamwidth on display was effectively compressed by the signal processing     

Detecting moving targets in SAR imagery by focusing

A new method for detecting moving targets in a synthetic aperture radar (SAR) image is presented. It involves segmenting a complex-valued SAR image into patches, focusing each patch separately, and measuring the sharpness increase in the focused patch. The algorithm is sensitive to azimuth velocities and is exquisitely sensitive to radial accelerations of the target, allowing it to detect motion in any direction. It is complementary to conventional Doppler-sensing moving target indicators, which can sense only the radial velocity of rapidly moving targets.     

一种基于盲同态解卷积的SAR成像自聚焦算法

针对大气扰动及飞行平台不稳引起机载合成孔径雷达(SAR)图像散焦的问题,提出了一种新的自聚焦算法来估算运动误差。该算法是基于运动误差函数及场景散射函数平滑特性的差异来进行估计的,利用复对数变换将图像的幅度与相位信息分离,进而分别对相位及幅度信息进行处理。运动误差通常为慢变函数,而场景的散射信息具有某种随机特性。因此,经过复对数变换后,运动误差及散射信息可以通过滤波器进行分离,将相位中的随机噪声去除,从而保留了慢变的运动误差函数。为了去除噪声信息,需要建立一个平滑滤波器,利用Daubechies小波的尺度函数构造Riesz基向量,从而建立了正交子空间,通过所建立信号子空间及噪声子空间组建平滑滤波器,最终可以获得准确的运动误差。在实验部分,分别利用仿真数据及实测数据对本文方法进行验证,最终结果分析表明该方法具有很高的估计精度及执行效率。     

Target motion compensation in synthetic aperture radar

In a synthetic aperture radar (SAR) targets on the ground that are moving become smeared as a result of velocity components parallel to the motion of the radar and are moved to radically different angular positions if they have velocity components perpendicular to the motion of the radar. Methods for restoring moving targets to their correct size and position are described. The samples collected for SAR processing are frequency-modulated RF pulses. Mathematically this leads to spectra that are described by Fresnel integrals. For stationary targets, the spectrum is symmetrical around the origin. If there is a moving target in a range cell, its Doppler spectrum will be displaced from the origin and may undergo other changes as a result of its nonzero velocity. Proper compensation to locate the target at the correct position requires that the spectrum be translated to a position dependent on the along-track velocity rather than to the origin. From the central frequency, the along-range velocity component can be estimated and the length of the translation can then be found. After translation, the spectrum is converted back to the time domain and the customary SAR processing is performed