共查询到20条相似文献,搜索用时 140 毫秒
1.
基于不变流形的小推力Halo轨道转移方法研究 总被引:1,自引:1,他引:1
利用动力系统理论中的不变流形概念设计向halo轨道转移的小推力轨道。首先,根据小推力发动机是否工作将转移轨道划分为上升段和滑行段。两个轨道段分别采用不同的动力学模型描述;并通过不变流形和Lyapunov反馈控制原理将整段轨道参数化;最后进行参数优化获得最优转移轨道。这种方法通过合理选择坐标系和利用反馈控制的方法,避免了由三体动力学模型以及最优控制问题的共轭方程所具有的极强的非线性带来的求解困难。具有很强的收敛性;优化过程的每一步中不包含迭代过程,计算速度快。并以从地球停泊轨道向日-地L2点halo轨道转移为例验证了此方法的有效性。这种方法对小推力动平衡点任务设计有着重要的实际意义。 相似文献
2.
针对小推力转移轨道优化过程往往忽略初值多样性的现状,研究了基于不同脉冲初值的小推力转移轨道优化问题。基于直接法的离散思想建立了小推力转移轨道优化模型,提出了基于粒子群和序列二次规划的组合优化算法,以地球1∶1共振近地小行星2016HO3交会任务为例,将3种典型的脉冲轨道作为初值设计了燃料最优小推力转移轨道。仿真结果表明:3种初值轨道优化得到了2个小推力转移发射窗口,两者燃料消耗差距不超过6%。不同的初值对小推力轨道的整体性能指标影响较小,但开关机时刻和推力方向的变化会产生较大差异,从而得到不同的最优控制曲线。 相似文献
3.
空间电推进应用及技术发展趋势 总被引:1,自引:0,他引:1
充分调研分析了国外空间电推进技术及典型应用情况,详细介绍了电推进在GEO卫星位置保持和轨道转移、深空探测主推进、中低轨道航天器无拖曳控制与高精度姿态控制、空间太阳能电站轨道维持等领域的空间应用情况。对电推进在国内不同领域的应用需求进行了分析,包括GEO卫星位置保持和全电推进、近地小行星探测等深空探测主推进、低轨航天器无拖曳控制和轨道维持、(超)低轨小卫星编队飞行及(微)小卫星精确轨道控制和空间太阳能电站轨道维持等任务。电推进技术正朝着高功率、大推力、低功率、微小推力、宽功率范围推力连续可调、高比冲、长寿命和多模式方向发展。针对电推进在不同应用领域的需求及电推进技术发展方向,提出了我国未来20年拟开展的电推进技术研究项目。 相似文献
4.
5.
6.
7.
8.
在研究小推力地球卫星圆轨道同轨调相任务设计问题的基础上,提出了一种半解析调相参数分析方法,并据此发展了一种高效的精确设计方法.首先,根据推力方向对卫星相位角的影响规律,采用推力方向假设和轨道平均技术推导了调相轨道参数满足的函数关系,通过微分修正可快速获得调相轨道的关键参数;然后,基于摄动轨道动力学模型,通过对控制量进行离散化建立了复杂约束条件下的燃料最省调相轨道设计模型,并以初始分析结果为初值,采用序列二次规划算法进行求解;最后,以地球同步轨道调相任务为例对所提方法进行了数值验证.数值仿真结果表明:提出的初始分析方法可为调相轨道设计提供合理的初值猜测,发展的鲁棒设计方法可有效用于摄动模型复杂约束下的小推力调相轨道设计. 相似文献
9.
10.
11.
The problem of optimization of a spacecraft transfer to the Apophis asteroid is investigated. The scheme of transfer under analysis includes a geocentric stage of boosting the spacecraft with high thrust, a heliocentric stage of control by a low thrust engine, and a stage of deceleration with injection to an orbit of the asteroid’s satellite. In doing this, the problem of optimal control is solved for cases of ideal and piecewise-constant low thrust, and the optimal magnitude and direction of spacecraft’s hyperbolic velocity “at infinity” during departure from the Earth are determined. The spacecraft trajectories are found based on a specially developed comprehensive method of optimization. This method combines the method of dynamic programming at the first stage of analysis and the Pontryagin maximum principle at the concluding stage, together with the parameter continuation method. The estimates are obtained for the spacecraft’s final mass and for the payload mass that can be delivered to the asteroid using the Soyuz-Fregat carrier launcher. 相似文献
12.
面向大椭圆轨道航天器交会对接、编队伴飞以及在轨操控等空间应用的需求,对大椭圆轨道上航天器间的相对运动进行了分析与建模,采用幂级数法分别在脉冲推力和常值推力作用两种情况下对系统进行了近似求解。通过对系统解的变换以及对系统状态的重构,给出了大椭圆轨道上的三种交会制导律。脉冲推力作用假设下的脉冲制导类似近圆轨道的Hill制导方法。常值推力作用假设下的全状态反馈制导律则在交会制导、相对悬停和循迹绕飞控制的过程中实现了对相对位置和相对速度的同步控制。通过构造新的系统状态,改进的变系数全状态反馈制导律提高了相对速度的制导精度,降低了相对制导过程中的最大轨控加速度。三种制导律的制导效果通过数学仿真进行了校验和比较,文中给出的方法实现了椭圆轨道上相对交会制导、悬停保持和循迹绕飞控制。 相似文献
13.
《Acta Astronautica》1999,44(5-6):219-225
The spacecraft flights to the Near-Earth asteroid in order to give an impact influence on the asteroid, correct its orbit and prevent the asteroid’s collision with the Earth are analyzed.In the first part, the impulse flights are analyzed in the Lambert approach. There are determined the optimal trajectories maximizing the asteroid deviation from the Earth.In the second part, the flights with the chemical and electric-jet engines are analyzed. The high thrust is used to launch the spacecraft from the geocentric orbit, and the low thrust is applied for the heliocentric motion. On the base of optimal impulse transfer, the optimal low thrust trajectories are determined using Pontryagin maximum principle.The numerical results are given for the flight to the asteroid Toutatis. Parameters of the spacecraft impact on the asteroid are determined. The asteroid deviation from the Earth caused by the spacecraft influence is presented. 相似文献
14.
本文研究卫星轨道圆化的点火控制策略,发动机推力为有限常值,方向可调。考虑了燃料消耗引起的质量损失。假设圆轨道上有一飞行器在运动,称为虚拟轨道器。只要卫星与虚拟轨道器软交会,就完成了轨道圆化。文中给出了使卫星与虚拟轨道器软交会的推力方向控制策略和点火位置与关车位置的求取方法。仿真结果表明,本文方法与水平推力策略和切向推力策略相比,具有更高的控制精度,而且燃料消耗接近最优。 相似文献
15.
16.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
17.
为在实际摄动条件下由远程导引变轨方案初始设计结果实现追踪航天器与目标航天器的交会,提出了一种修正变轨方案。将初始多脉冲式变轨方案转换为有限推力式并作修正,取远程导引结束时刻追踪与目标航天器间的相对轨道要素为目标函数,采用J2,J3,J4解析轨道预报器对目标函数计算需要的轨道进行预报,以历次变轨开始时刻、结束时刻和推力方向为优化变量,用边界约束有限存储BFGS(L-BFGS-B)优化算法获得的最优解为修正后的变轨方案,可消除摄动模型误差。算例结果表明,经转换和修正所得有限推力式变轨方案能在实际摄动条件下实现追踪航天器与目标航天器的交会。 相似文献
18.
围绕航天器快速精确轨道机动问题,探讨在持续小推力作用下,航天器轨道机动中时 间和能量综合最优控制的技术和方法。基于Pontryagin最小(大)值原理,针对目标轨道为平 面和空间椭圆的情况,推导了时间-能量综合最优控制的Hamilton正则方程组、终端条件 、横截条件和最优控制的表达式,应用数值方法求解正则微分方程组的两点边值问题,得到 了最优控制的数值解,包括最小时间、最小能量、最优轨道、最优控制时变曲线和最优反馈 控制曲线等,实现轨道机动最优控制的精确数值模拟。从数值结果的对比分析中得出了一些 有意义的结论,可供工程实际参考。
相似文献
相似文献
19.
20.
根据单摆模型近似晃动质量推导晃动运动与姿态运动的动力学方程,基于状态相关黎卡提方程方法,综合动态逆控制方法设计了运载器末助推段非线性姿态控制器,由状态反馈实现姿态跟踪和晃动抑制。因实际中模拟晃动运动的单摆状态无法测量,引入输出多采样率技术,通过在一个采样周期内多次检测被控对象的输出估计状态,实现设计的状态反馈控制律。数... 相似文献