MESSENGER at Mercury: Early orbital operations

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft, launched in August 2004 under NASA's Discovery Program, was inserted into orbit about the planet Mercury in March 2011. MESSENGER's three flybys of Mercury in 2008–2009 marked the first spacecraft visits to the innermost planet since the Mariner 10 flybys in 1974–1975. The unprecedented orbital operations are yielding new insights into the nature and evolution of Mercury. The scientific questions that frame the MESSENGER mission led to the mission measurement objectives to be achieved by the seven payload instruments and the radio science experiment. Interweaving the full set of required orbital observations in a manner that maximizes the opportunity to satisfy all mission objectives and yet meet stringent spacecraft pointing and thermal constraints was a complex optimization problem that was solved with a software tool that simulates science observations and tracks progress toward meeting each objective. The final orbital observation plan, the outcome of that optimization process, meets all mission objectives. MESSENGER's Mercury Dual Imaging System is acquiring a global monochromatic image mosaic at better than 90% coverage and at least 250 m average resolution, a global color image mosaic at better than 90% coverage and at least 1 km average resolution, and global stereo imaging at better than 80% coverage and at least 250 m average resolution. Higher-resolution images are also being acquired of targeted areas. The elemental remote sensing instruments, including the Gamma-Ray and Neutron Spectrometer and the X-Ray Spectrometer, are being operated nearly continuously and will establish the average surface abundances of most major elements. The Visible and Infrared Spectrograph channel of MESSENGER's Mercury Atmospheric and Surface Composition Spectrometer is acquiring a global map of spectral reflectance from 300 to 1450 nm wavelength at a range of incidence and emission angles. Targeted areas have been selected for spectral coverage into the ultraviolet with the Ultraviolet and Visible Spectrometer (UVVS). MESSENGER's Mercury Laser Altimeter is acquiring topographic profiles when the slant range to Mercury's surface is less than 1800 km, encompassing latitudes from 20°S to the north pole. Topography over the remainder of the southern hemisphere will be derived from stereo imaging, radio occultations, and limb profiles. MESSENGER's radio science experiment is determining Mercury's gravity field from Doppler signals acquired during frequent downlinks. MESSENGER's Magnetometer is measuring the vector magnetic field both within Mercury's magnetosphere and in Mercury's solar wind environment at an instrument sampling rate of up to 20 samples/s. The UVVS is determining the three-dimensional, time-dependent distribution of Mercury's exospheric neutral and ionic species via their emission lines. During each spacecraft orbit, the Energetic Particle Spectrometer measures energetic electrons and ions, and the Fast Imaging Plasma Spectrometer measures the energies and mass per charge of thermal plasma components, both within Mercury's magnetosphere and in Mercury's solar-wind environment. The primary mission observation sequence will continue for one Earth year, until March 2012. An extended mission, currently under discussion with NASA, would add a second year of orbital observations targeting a set of focused follow-on questions that build on observations to date and take advantage of the more active Sun expected during 2012–2013. MESSENGER's total primary mission cost, projected at $446 M in real-year dollars, is comparable to that of Mariner 10 after adjustment for inflation.     

Evolution of the out-of-plane amplitude for quasi-periodic trajectories in the Earth–Moon system

The out-of-plane amplitude along quasi-periodic trajectories in the Earth–Moon system is highly sensitive to perturbations in position and/or velocity as underscored recently by the ARTEMIS spacecraft. Controlling the evolution of the out-of-plane amplitude is non-trivial, but can be critical to satisfying mission requirements. The sensitivity of the out-of-plane amplitude evolution to perturbations due to lunar eccentricity, solar gravity, and solar radiation pressure is explored and a strategy for designing low-cost deterministic maneuvers to control the amplitude history is also examined. The method is sufficiently general and is applied to the L₁ quasi-periodic orbit that serves as a baseline for the ARTEMIS P2 trajectory.     

Aladdin mission concept

Aladdin, one of five Concept Study winners for NASA's Discovery AO98-OSS-04, was a mission to obtain samples from the two Martian moons using several unique mission design and sample collection techniques. The mission design enabled sample return from two bodies at the relatively low cost of a Discovery-class mission. It featured a phasing orbit, multiple flybys of the Martian moons, and a short overall mission duration. The phasing orbit greatly reduced the post-launch Δv requirement, thus permitting the use of a Delta II launch vehicle. Multiple moon flybys provided ample opportunities for sample collection and science observations. The short overall mission duration reduced program costs. Aladdin's sample collection, unlike traditional sample collection methods, used a “launch-and-catch” technique to obtain samples. Projectiles would be launched to the moon's surface during a close flyby and the ejected particles gathered for Earth return and analysis. This innovative technique, the Aladdin mission, and the possible extension of the technique to other bodies are described.     

基于不同动力引力辅助模型的木星转移轨道设计

针对木星转移轨道设计中动力引力辅助模型选择问题展开了研究。首先,介绍了近心点机动和甩摆后机动2种动力引力辅助模型,给出了2种模型下最优脉冲机动速度增量的解算方法;然后,基于动力引力辅助模型,提出了包含引力辅助的行星际转移轨迹初始设计方法;最后,以木星探测任务转移轨迹设计为例,对比了不同动力引力辅助模型下探测器的燃料消耗情况。仿真结果表明:相比于甩摆后机动方式,近心点轨道机动方式更加节省燃料。基于近心点机动引力辅助模型,最终完成了金星-地球-地球引力辅助序列的木星转移轨迹初始设计,为我国未来采用引力辅助方式的深空探测任务提供了一定的参考。     

Rosetta: The ESA comet rendezvous mission

Rosetta was selected in November 1993 for the ESA Cornerstone 3 mission, to be launched in 2003, dedicated to the exploration of the small bodies of the solar system (asteroids and comets). Following this selection, the Rosetta mission and its spacecraft have been completely reviewed: this paper presents the studies performed the proposed mission and the resulting spacecraft design.

Three mission opportunities have been identified in 2003–2004, allowing rendezvous with a comet. From a single Ariane 5 launch, the transfer to the comet orbit will be supported by planetary gravity assists (two from Earth, one from Venus or Mars); during the transfer sequence, two asteroid fly-bys will occur, allowing first mission science phases. The comet rendezvous will occur 8–9 years after launch; Rosetta will orbit around the comet and the main science mission phase will take place up to the comet perihelion (1–2 years duration).

The spacecraft design is driven (i) by the communication scenario with the Earth and its equipment, (ii) by the autonomy requirements for the long cruise phases which are not supported by the ground stations, (iii) by the solar cells solar array for the electrical power supply and (iv) by the navigation scenario and sensors for cruise, target approach and rendezvous phases. These requirements will be developed and the satellite design will be presented.     

不同月球借力约束下的地月Halo轨道转移轨道设计

针对地月系L2点不同任务需求下的低耗能转移轨道设计问题,基于不变流形理论与混合优化技术,深入研究了不同月球借力约束与不同幅值Halo轨道的入轨点（简称HOI点）对转移轨道飞行时间与燃料消耗的影响,给出了HOI点选择策略。首先结合任务要求并考虑月球引力影响,在月球借力点施加不同约束条件,通过微分修正算法调整Halo轨道的稳定流形,设计月球到Halo轨道的转移轨道。采用遗传算法与微分修正算法相结合的混合优化策略,在同时考虑地球停泊轨道高度、倾角、升交点赤经与航迹角等多约束条件下,对燃料最优的地月转移轨道进行研究。最后,分析月球借力高度、借力方位角和不同HOI点对平动点转移轨道飞行时间与燃耗变化量的影响,对于考虑月球借力的地月平动点转移轨道设计与应用具有重要的参考价值。     

太阳系边际探测飞行任务规划

针对太阳系边际探测任务，开展了星际多目标飞越的任务规划，采用小推力混合优化设计方法完成了基于借力飞行及电推进技术的行星际转移轨道联合优化设计，对比研究了面向日球层鼻尖和尾部探测的星际多目标探测飞行方案。研究表明，探测器在2024-2025年发射，可飞抵日球层鼻尖区域，在2027-2030年发射可飞抵日球层尾部区域，并可在2049年1月1日前飞离日心100 AU，实现太阳系边际空间的科学探测。其中日球层鼻尖探测任务探测器飞抵100 AU的位置位于鼻尖中心区域，可与旅行者1号、2号探测器形成有效互补。文章所用任务规划方法，可为太阳系边际探测的自主任务规划技术提供基础，相关研究成果能够为未来中国首次太阳系边际探测任务的实施提供有价值的参考。     

The Aurora project: Estimation of the optical sail parameters

The thrust model for computing a sailcraft trajectory contains thermo-optical parameters that are averages over the spectrum of the incident photons, namely, with respect to energy, intensity and polarization. These parameters are not observables and could change considerably from a sail to sail for a number of practical reasons. The mission analysis for a sailcraft is a progressive task from a simple trajectory propagator to the orbit determination. Aurora sailcraft mission analysis has advanced another step forward by processing experimental data related to aluminium. Once appropriate fitting functions have been selected, differential specular and diffused reflectance and differential absorptance have been averaged over incident solar spectrum, assumed a Planckian here. The result has been to get incident-angle-dependent optical parameters more reliable than mere literature values. The procedure has entailed the computation of grids of complicated definite integrals. They are particularly important during the trajectory optimization of the Aurora solar flyby, a very sensitive profile that would allow the sailcraft to achieve cruise speeds ranging from 12 to 20 AU/yr.     

嫦娥二号探测器轨道确定与支持

针对嫦娥二号探测器直接进入地月转移轨道、距月面100km高度捕获月球、完成既定任务后飞往日地第二拉格朗日平动点等飞行轨道方面的新特点,分析了定轨预报策略,利用事后精密轨道,全面评估了关键变轨点定轨预报和变轨后快速定轨的精度,其中,近月制动前3h定轨预报至近月点的位置误差为1km,速度误差为 0.3m/s 。利用不同月球引力场模型进行环月轨道精密定轨,根据实测数据残差分析和精密星历比对的结果,采用SGM100h引力场模型的定轨残差均方根最大。此外,针对嫦娥二号扩展任务,分析了不同测轨条件下的定轨精度,测量数据残差分析结果表明,在扩展任务中途修正前的定轨弧段内,测距、时延和时延率数据的残差分别为5m,5ns和1ps/s。     

基于地球引力变轨的日冕探测器轨道设计

研究了相对黄道面有一定倾角的探测器轨道设计的问题。以金星借力轨道设计为例,分析了轨道偏心率与轨道倾角增量之间的关系。根据C3匹配原理搜索了“地球-中间天体-地球”多天体交会的发射窗口。最后,设计了与地球轨道周期相等的三次地球借力轨道,该轨道倾角可以达到黄纬30°以上。理论分析及仿真结果表明:基于地球引力设计此类轨道时,应采用多天体交会方案,才能既保证地球逃逸能量低,又保证首次飞入地球影响球前轨道偏心率较大的双重指标;同时应采用多次地球借力方案,该方案具有每次借力后轨道偏心率逐渐减小的特点,当其减小到零时,再次借力后轨道倾角不会继续增加。     

Cassini Saturn-escape trajectories to Jupiter,Uranus, and Neptune

Potential encore-mission scenarios have been considered for the Cassini mission. In this paper we discuss one of the end-of-life scenarios in which the Cassini spacecraft could perform a Saturn escape via gravity assists from Titan. It is shown that such satellite-aided escape requires a small deterministic maneuver (e.g., Δv<50 m/s), but provides enough energy for the Cassini spacecraft to reach a range of targets in our Solar System, as close to the Sun as the asteroid belt or as far as the Kuiper belt. The escape sequence could be initiated from an arbitrary point during the on-going Cassini mission. Example tours are presented in which the final Titan flyby places the spacecraft into ballistic trajectories that reach Jupiter, Uranus, and Neptune. After years of heliocentric flight, the spacecraft could impact on the target gas giant or perform a flyby to escape from the Solar System (if not to another destination). The concept can be generalized to a new kind of missions, including nested-grand tours, which may involve satellite-aided captures and escapes at more than one planet.     

Broad-search algorithms for the spacecraft trajectory design of Callisto–Ganymede–Io triple flyby sequences from 2024 to 2040, Part I: Heuristic pruning of the search space

Triple flybys of the Galilean moons of Jupiter can capture a spacecraft into orbit about Jupiter or quickly adjust the Jupiter-centered orbit of an already captured spacecraft. Because Callisto does not participate in the Laplace resonance among Ganymede, Europa, and Io, triple flyby sequences involving gravity-assists of Callisto, Ganymede, and Io occur only aperiodically for limited time windows. An exhaustive search of triple-flyby trajectories over a 16-year period from 2024 to 2040 using “blind” searching would require 8,415,358 Lambert function calls to find only 127,289 possible triple flyby trajectories. Because most of these Lambert function calls would not converge to feasible solutions, it is much more efficient to prune the solution space using a heuristic algorithm and then direct a much smaller number of Lambert function calls to find feasible triple flyby solutions. The novel “Phase Angle Pruning Heuristic” is derived and used to reduce the search space by 99%.     

Broad-search algorithms for the spacecraft trajectory design of Callisto–Ganymede–Io triple flyby sequences from 2024 to 2040, Part II: Lambert pathfinding and trajectory solutions

Triple-satellite-aided capture employs gravity-assist flybys of three of the Galilean moons of Jupiter in order to decrease the amount of ΔV$\mathrm{\Delta }V$ required to capture a spacecraft into Jupiter orbit. Similarly, triple flybys can be used within a Jupiter satellite tour to rapidly modify the orbital parameters of a Jovicentric orbit, or to increase the number of science flybys. In order to provide a nearly comprehensive search of the solution space of Callisto–Ganymede–Io triple flybys from 2024 to 2040, a third-order, Chebyshev's method variant of the p-iteration solution to Lambert's problem is paired with a second-order, Newton–Raphson method, time of flight iteration solution to the _V∞$V_{\infty }$-matching problem. The iterative solutions of these problems provide the orbital parameters of the Callisto–Ganymede transfer, the Ganymede flyby, and the Ganymede–Io transfer, but the characteristics of the Callisto and Io flybys are unconstrained, so they are permitted to vary in order to produce an even larger number of trajectory solutions. The vast amount of solution data is searched to find the best triple-satellite-aided capture window between 2024 and 2040.     

Exploring the Kuiper Belt: An extended Pluto mission

A robotic flyby mission to the planet Pluto is being planned for launch early in the next decade. The spacecraft will continue on out of the solar system in an almost radial direction traveling at about four AU per year and begin transiting the Kuiper Belt shortly after Pluto encounter. Recent discoveries and observations of Kuiper Belt objects have generated increased interest in the characteristics of these bodies. This paper examines the opportunities and requirements for extending the Pluto mission to include the search for, and encounters with, objects in the Kuiper Disk at 40+ AU. The trajectory and ΔV requirements will be presented. An automated, on-board sky survey will be proposed to inventory the Kuiper objects in the vicinity of the flight path and to identify which objects are candidates for altering the trajectory for a close flyby. A possible Kuiper object encounter science scenario will be described.     

CHANG'E-2 lunar escape maneuvers to the Sun–Earth L2 libration point mission

This paper addresses lunar escape maneuvers of the first Chinese Sun–Earth L2 libration point mission by the CHANG'E-2 satellite, which is also the world's first satellite to reach the L2 point from a lunar orbit. The lunar escape maneuvers are heavily constrained by the remaining propellant and the condition of telemetry, track and command, among others. First, these constraints are analyzed and summarized to design a target L2 Lissajous orbit and an initial transfer trajectory. Second, the maneuver mathematical models are studied. The multilevel maneuver schemes which consist of phasing maneuvers and a final lunar escape maneuver are designed for actual operations. Based on the scheme analysis and comparison, the 2-maneuver scheme with a 5.3-h-period phasing orbit is ultimately selected. Finally, the mission status based on the scheme is presented and the control operation results are discussed in detail. The methodology in this paper is especially beneficial and applicable to a future multi-mission instance in the deep space exploration.     

Station keeping of a solar sail around a Halo orbit

Solar sails are a concept of spacecraft propulsion that takes advantage of solar radiation pressure to propel a spacecraft. Although the thrust provided by a solar sail is small it is constant and unlimited. This offers the chance to deal with novel mission concept. In this work we want to discuss the controllability of a spacecraft around a Halo orbit by means of a solar sail. We will describe the natural dynamics for a solar sail around a Halo orbit. By natural dynamics we mean the behaviour of the trajectory of a solar sail when no control on the sail orientation is applied. We will then discuss how a sequence of changes on the sail orientation will affects the sail's trajectory, and we will use this information to derive efficient station keeping strategies. Finally we will check the robustness of these strategies including different sources of errors in our simulations.     

太阳帆日心定点悬浮转移轨道设计

研究了太阳帆航天器日心定点悬浮轨道(HFDO)的转移轨道设计问题,以球坐标形式建立了太阳帆的动力学模型,基于该模型给出在日心悬浮轨道基础上实现定点悬浮的条件,提出了一种实现日心定点悬浮的转移轨道设计方法。首先,确定定点悬浮的位置;然后,设计经过该位置的绕日极轨轨道;最后,实施轨道减速实现定点悬浮,并给出了解析形式的轨道控制律。结合太阳极地观测任务,设计了定点悬浮在太阳北极1AU处的太阳帆转移轨道。仿真结果表明:该轨道转移方案总耗时3.5年,太阳帆定点到黄北极距日心1AU处,此后只要保持太阳光垂直照射帆面,即可维持稳定的悬浮状态。     

SciBox,an end-to-end automated science planning and commanding system

SciBox is a new technology for planning and commanding science operations for Earth-orbital and planetary space missions. It has been incrementally developed since 2001 and demonstrated on several spaceflight projects. The technology has matured to the point that it is now being used to plan and command all orbital science operations for the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission to Mercury. SciBox encompasses the derivation of observing sequences from science objectives, the scheduling of those sequences, the generation of spacecraft and instrument commands, and the validation of those commands prior to uploading to the spacecraft. Although the process is automated, science and observing requirements are incorporated at each step by a series of rules and parameters to optimize observing opportunities, which are tested and validated through simulation and review. Except for limited special operations and tests, there is no manual scheduling of observations or construction of command sequences. SciBox reduces the lead time for operations planning by shortening the time-consuming coordination process, reduces cost by automating the labor-intensive processes of human-in-the-loop adjudication of observing priorities, reduces operations risk by systematically checking constraints, and maximizes science return by fully evaluating the trade space of observing opportunities to meet MESSENGER science priorities within spacecraft recorder, downlink, scheduling, and orbital-geometry constraints.     

State propagation in an uncertain asteroid gravity field

Various spacecraft have been and will be sent to asteroids to characterize them. Generally, an asteroid's gravity field is very irregular and not accurately known when compared to the gravity field of a major planet, Earth in particular. It has been well studied that the irregularity significantly affects the trajectory of an orbiting spacecraft, and causes it to impact or to escape from the asteroid. Complementary to that, this paper focuses on the influence of the limited knowledge of this gravity field on the evolution of the spacecraft's orbit. It develops a general method by which this influence can be quantified. This method comprises specific Monte Carlo simulations with a discrete set of low-altitude orbits, taking into account the uncertainties in the gravity-field parameters. For illustration purposes, it is applied to two different asteroids. Already after three revolutions, the gravity-field uncertainties propagate to significant position uncertainties; this specifically holds for prograde orbits, and around the smaller asteroid. Applying this robust and accurate method helps mission designers and planners to assess the risk posed by gravity uncertainties, and take appropriate measures such as choosing the most favorable orbital geometries and/or lowering the orbit more slowly.