基于弹道逃逸和小推力捕获的地月转移轨道设计

针对地月空间货运任务和环月轨道空间设施建设任务,提出一种弹道逃逸和小推力捕获相结合的新型地月轨道转移模式,并建立了一整套该类型轨道设计方法。首先,在三体模型假设下分别建立地心弹道逃逸轨道和月心小推力捕获轨道的二维极坐标动力学模型。对于弹道逃逸轨道,将地心旋转系对准角和地月转移加速速度增量作为控制变量,提出初值估计解析公式,并应用序列二次规划算法进行快速求解。对于小推力捕获轨道,以月心距为参考量设置与弹道逃逸轨道的拼接点约束,提出能量匹配方法预估飞行时间,采用最优螺旋轨道的初始伴随状态解析式预估近月点伴随变量初值。基于混合法和轨道逆推思想,采用人工免疫算法进行小推力捕获轨道求解。仿真结果表明,基于弹道逃逸和小推力捕获的地月轨道转移方式大幅降低了近月制动燃料消耗,能快速穿越地球辐射带,且飞行时间适中;同时,提出的轨道设计方法能快速搜索到基于弹道逃逸和小推力捕获的地月转移轨道,验证了该方法的有效性。     

Impact of mission requirements and constraints on conceptual launch vehicle design

The objective of this paper is to analyse the impact of mission requirements and constraints on both the optimum vehicle design and the effects on flight path selection for two types of reusable two-stage-to-orbit launch vehicles. The first vehicle type considered provides horizontal take-off and landing capabilities and is intended to be propelled by an airbreathing propulsion system during stage 1 flight. The second vehicle type assumes a vertical launch and is accelerated by a rocket propulsion system during the booster stage ascent flight. The analysis employs a design tool for simultaneous system and mission optimization. It consists of a CAD-based preliminary vehicle design tool, aerodynamic and aerothermodynamic calculation software, flight simulation programs, and a two-level decomposition optimization algorithm enabling simultaneous system and flight optimization. The results to be presented show that the cruise flight requirement for an European launched mission of the airbreathing vehicle results in a loss of 60 % payload mass as compared to a mere accelerated ascent for a near equatorial mission into the same target orbit assuming constant take-off mass. The strong dependencies of mission requirements on both the optimal vehicle design and the ascent performance are determined for the rocket-powered vehicle type by varying the inclination and altitude of the target orbit.     

人工智能在航天飞行任务规划中的应用研究

 在航天飞行任务中，如何设计航天器的飞行过程，如何确定地面对航天器的控制操作，如何制定飞行控制计划等，是地面飞行控制中心面临的重大问题，也是航天飞行任务规划所要解决的基本问题。在充分认识和把握人工智能基本原理、方法和技术的基础上，提出了一个基于规则演绎和状态演化的生长式推理模型，并对模型的特性进行了详细讨论，然后导出了该模型在航天飞行任务规划问题中的具体形式，从而成功地解决了航天任务自动规划的难题。通过在实际航天任务中的应用和验证，不仅证明该模型和方法是正确的、可行的和高效的，而且证明人工智能在航天飞行任务规划中有着广阔的应用前景。     

Autonomous mission reconstruction during the ascending flight of launch vehicles under typical propulsion system failures

In recent years, Chinese Long March(LM) launchers have experienced several launch failures, most of which occurred in their propulsion systems, and this paper studies Autonomous Mission Reconstruction(AMRC) technology to alleviate losses due to these failures. The status of the techniques related to AMRC, including trajectory and mission planning, guidance methods,and fault tolerant technologies, are reviewed, and their features are compared, which reflect the challenges faced by AMRC technology...     

The Concept and Definition of Integrated Flight Performance for a Small Remotely Piloted Helicopter

The concept and definition of integrated flight performance for a small remotely piloted helicopter are introduced to obtain real operational values in performing a flight mission.     

临近空间高超声速飞行器天文导航系统综述

临近空间是航天与航空业务领域的结合部，具有重要的战略价值。高超声速飞行器是临近空间力量部署的重要载体，已逐渐进入应用部署阶段。临近空间高超声速飞行器的飞行环境和任务条件对导航系统提出了新的更高要求。在总结临近空间高超声速飞行器的导航技术研究进展的基础上，对天文导航技术的应用环境和条件进行了系统的分析和探讨，提出了5个重点研究方向，包括：星图采集效能、光学误差模型、视场观测机理、姿态更新速率、小型化模块化工程化等。研究结果可为临近空间高超声速飞行器天文导航系统的设计提供参考。     

负升力返回时航天器的再入走廊与轨迹研究

研究了较大升阻比航天器采用负升力返回时的再入走廊与最优轨迹，通过数字仿真并与正升力再入时的结果比较，得到结论：采用负升力再入时的返回走廊前１／３段比采用正升力的相应部分宽度有较大增加；离轨点所耗燃料质量与热防护系统质量之和较正升力再入时的情况有一定减少。由此可见，负升力再入概念在提高有效载荷上明显优越于正升力再入概念。     

气动磁镜聚变推进器的火星探测任务分析

将气动磁镜聚变概念拓展到空间推进器应用,分析了不同等离子体密度和氢推进剂质量流率下聚变推进器的比冲和推力变化范围,理论计算表明其比冲可达10 000 s以上,推力最高可达几十牛。在此基础上,进一步采用气动磁镜聚变推进器对地火转移任务进行了数值仿真。假设推进器初始质量为100 t,仿真结果表明:当飞行时间在282.42~639.76 d变化时,剩余质量从88.59 t提升至98.24 t。相关分析表明基于气动磁镜的聚变空间推进器通过调节比冲和推力组合方式,可以很好地满足未来火星载人和货运任务对飞行时间和有效载荷份额的不同需求,是未来高性能空间推进器发展的一种候选方案。      

太阳同步卫星轨道参数的容许偏差分析

飞行任务对卫星轨道提出指标要求，这些指标决定了卫星轨道参数的容许偏差范围。结合太阳同步(准)回归轨道卫星的轨道特性，针对覆盖重叠率、太阳同步等指标，使用解析方法讨论了大气阻力摄动影响下轨道参数的容许偏差，通过分析可以初步确定轨道控制策略及能量需求，最终为轨道保持方法的设计提供参考和依据。     

航天器返回地球的气动特性综述

航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。     

临近空间无人飞行器多余度容错导航系统设计

临近空间无人飞行器导航系统的故障直接影响到飞行器的任务执行和飞行安全,因此必须能够长时间地保持稳定性和精确性,为达到此目的必须设计由惯性导航、卫星导航等多种导航传感器组成的多源多余度容错导航系统,提高系统的可靠性。针对临近空间飞行器制导控制对导航信息的需求,提出了一种标准的三余度导航系统架构,并设计了采用新型加权平均表决子算法,具备故障检测和隔离以及故障重构功能的容错重构算法,构建了适用于临近空间无人飞行器的多余度容错导航系统,通过实测试验数据仿真验证了容错导航系统的性能,展示了系统一次故障工作的故障容错能力。所研究内容也可被其他类型的无人飞行器借鉴和参考。     

Scheme design of the CHANG’E-5T1 extended mission

Flight schemes for the CHANG’E-5T1 extended mission are investigated in this paper. In the flight scheme and trajectory design, the remaining propellant of the CHANG’E-5T1 mission is utilized. The CHANG’E-5T1 mission is firstly introduced with feasible flight goals derived based on the terminal trajectory and satellite status. The flight schemes are designed to include a lunar return and the libration points in the Sun-Earth/Moon and Earth-Moon systems, with an emphasis on the Earth-Moon triangle libration point thus far unexplored. Secondly, three schemes are proposed for the CHANG’E-5T1 extended mission with different flight goals. The direct libration point orbit transfer and injection method is adopted to solve the issue in the transfer trajectory design. Furthermore, an innovative concept is proposed to transfer from the Earth-Moon collinear libration point to the triangle point using the Sun-Earth/Moon libration point. Finally, the merits and drawbacks of the three schemes are discussed in terms of flight time, control energy and frequency, flight distance, and goal value. As a result, the scheme including a lunar return and the Earth-Moon L2 libration point is selected for the CHANG’E-5T1 extended mission. A flight to the Earth-Moon libration point is achieved, replicating the achievement of the ARTEMIS mission.     

空间绳系组合体的继电型控制离轨策略

为了使空间绳系组合体更好地完成空间碎片清理任务,提出一种更接近工程实际应用的继电型推力（Bang-Bang）离轨控制策略。利用带有差动间隙的Bang-Bang控制策略,实现绳系组合体切向的继电式推力加速;设计了一种全新的被动式卷扬机构,以避免在使用继电式推力离轨的过程中多次开关发动机对绳系组合体带来的负面影响;针对径向推力设计了输入受限的滑模控制器,且最终控制指令同样以继电式推力形式实现,抑制了离轨过程中绳系组合体的面内摆动。数值仿真结果显示,继电型推力能够实现与连续推力近似的效果,能够将绳系组合体的摆动角度抑制在一个较小的范围内;整个离轨控制策略能够使得空间绳系组合体在保持姿态稳定的前提下将空间碎片拖曳到坟墓轨道。     

高速再入飞行试验再入条件优化设计

飞行器返回再入时将经历极高的气动热环境,因此深空探测返回飞行器,尤其是载人飞船需要通过实际飞行试验验证相关性能,为降低成本和研制风险,通常采用大再入角和相对第二宇宙速度较低的再入速度进行飞行试验。为获得能实现高热流密度验证的最小能量再入任务方案,采用优化设计手段对飞行试验的再入角和速度以及倾侧角控制进行设计,经仿真分析表明,优化结果可达到飞行试验要求的热流密度,并可将再入速度需求降低约2．1 km／s。     

机动飞行条件下双盘悬臂转子的振动特性

本文取双盘悬臂转子为分析对象 ,建立了水平盘旋和俯冲拉起两种机动飞行条件下转子振动的运动微分方程 ,并用四阶龙格库塔法进行了求解。结果表明 ,机动飞行在转子上产生的附加离心力和附加陀螺力矩将使转子产生较剧烈的瞬态振动 ;同时 ,转子的轴心轨迹中心会偏离轴线 ,使得转子产生明显的变形。因此 ,在分析转子振动特性时 ,应考虑机动飞行的影响     

Graph-tree-based software control flow checking for COTS processors on pico-satellites

 This paper proposes a generic high-performance and low-time-overhead software control flow checking solution, graph-tree-based control flow checking (GTCFC) for space-borne commercial- off-the-shelf (COTS) processors. A graph tree data structure with a topology similar to common trees is introduced to transform the control flow graphs of target programs. This together with design of IDs and signatures of its vertices and edges allows for an easy check of legality of actual branching during target program execution. As a result, the algorithm not only is capable of detecting all single and multiple branching errors with low latency and time overheads along with a linear-complexity space overhead, but also remains generic among arbitrary instruction sets and independent of any specific hardware. Tests of the algorithm using a COTS-processor-based onboard computer (OBC) of in-service ZDPS-1A pico-satellite products show that GTCFC can detect over 90% of the randomly injected and all-pattern-covering branching errors for different types of target programs, with performance and overheads consistent with the theoretical analysis; and beats well-established preeminent control flow checking algorithms in these dimensions. Furthermore, it is validated that GTCGC not only can be accommodated in pico-satellites conveniently with still sufficient system margins left, but also has the ability to minimize the risk of control flow errors being undetected in their space missions. Therefore, due to its effectiveness, efficiency, and compatibility, the GTCFC solution is ready for applications on COTS processors on pico-satellites in their real space missions.     

交会对接任务碰撞规避策略制定研究简

针对交会对接任务目标飞行器与追踪器轨道运行特性,综合考虑规避策略计算方法与工程实际相结合的问题,提出高度规避、时间规避以及与正常轨控相结合的碰撞规避策略计算方法等三种空间目标碰撞规避策略计算方法.高度规避计算方法采用了Lambert飞行原理,用简化二体开普勒模型取代高精度轨道预报方法,迭代求解规避机动速度增量,实现了通过约束过交点与目标径向距离差得到速度增量的最优解;时间规避计算方法通过轨道周期与速度增量的关系,实现了通过约束过交点与目标的时间差得到速度增量的最优解;与正常轨控相结合的碰撞规避策略计算方法,在正常控制考虑冗余控制量的基础上,对控制策略的控制开始时间或沿迹方向的速度增量进行较小的修正,使两者通过碰撞点的时刻或径向距离错开,达到碰撞规避的目的,该方法不仅可以节省燃料、而且对任务的影响较小.通过对三种空间目标碰撞规避策略计算方法仿真分析结果表明,完全适用于交会对接任务,可为我国载人航天任务飞行安全提供技术保障.     

复合材料在空间遥感器中的应用进展及关键问题

复合材料凭借其优异的性能已成为空间遥感器的重要材料,包含树脂基复合材料、金属基复合材料、陶瓷基复合材料以及碳/碳复合材料在内不同类型的复合材料皆有大量成功应用的实例。材料和工艺的更新发展,对于空间遥感器系统性能提升或者功能拓展都有着积极的意义。然而从工程化应用水平来看,目前尚处于替代传统材料满足型号产品需求的较低阶段。对空间遥感器所用材料的性能进行了对比与评价,介绍了复合材料在空间遥感器各主要部件中的应用情况,总结了适用于空间遥感器的复合材料及其成型工艺,并对复合材料在工程化应用中的关键技术问题作了进一步探讨,最后对空间遥感器发展对复合材料的需求作了展望。     

The Scientific Measurement System of the Gravity Recovery and Interior Laboratory (GRAIL) Mission

The Gravity Recovery and Interior Laboratory (GRAIL) mission to the Moon utilized an integrated scientific measurement system comprised of flight, ground, mission, and data system elements in order to meet the end-to-end performance required to achieve its scientific objectives. Modeling and simulation efforts were carried out early in the mission that influenced and optimized the design, implementation, and testing of these elements. Because the two prime scientific observables, range between the two spacecraft and range rates between each spacecraft and ground stations, can be affected by the performance of any element of the mission, we treated every element as part of an extended science instrument, a science system. All simulations and modeling took into account the design and configuration of each element to compute the expected performance and error budgets. In the process, scientific requirements were converted to engineering specifications that became the primary drivers for development and testing. Extensive simulations demonstrated that the scientific objectives could in most cases be met with significant margin. Errors are grouped into dynamic or kinematic sources and the largest source of non-gravitational error comes from spacecraft thermal radiation. With all error models included, the baseline solution shows that estimation of the lunar gravity field is robust against both dynamic and kinematic errors and a nominal field of degree 300 or better could be achieved according to the scaled Kaula rule for the Moon. The core signature is more sensitive to modeling errors and can be recovered with a small margin.     

我国空间站运行的测控通信工作模式初探

在分析我国载人空间站在轨运行的任务特点和对测控通信提出的新要求的基础上,对测控通信工作模式进行了探讨。针对任务中心,采用分布式模式进行任务的组织和实施,建立常态化工作体系;针对测控通信资源的使用,对资源进行简化、优化,发挥天、地基各自优势,并实现天地基资源统一调度;针对在轨故障诊断和应急处置,提出了“天地联合,以地为主”的载人航天故障诊断模式和实现途径;针对空间站遥操作需求,提出了一套工作模式和实施流程;针对测控通信长期执行任务的可靠性,提出了任务中心容灾备份工作模式和通信路由的备份模式。以期为后续任务工作模式设计提供参考。