低能量状态对飞行安全的危害及改出方法

对民机在进近着陆阶段可能诱发飞行事故的低能量状态和驾驶员的改出操纵方法进行了研究。根据近年的民机事故分析报告,结合运输类飞机适航标准CCAR-25-R4、飞行试验指南AC25-7C、军用规范及相关行业标准,较系统地提出了涉及着陆拉平、侧风着陆和可控撞地的低能量状态的定量判定准则。以某型支线客机为例,采用数字仿真计算的方法,分别研究了在进近着陆过程中低动能和低势能状态可能导致的飞行安全问题及其特点。针对低动能改出提出了增加速度并抑制爬升的方法,针对低势能改出提出了增大俯仰姿态并保持速度的方法,最后通过仿真计算验证了两种改出方法的有效性。研究结果可为低能量告警系统的设计和驾驶员的改出操纵培训等提供理论参考。     

无人机系统的安全性与危险源分析

无人机系统的战术性能及优势将使其在未来高技术战争和民用航空中发挥越来越重要的作用。然 而,由于有人机与无人机飞行事故的特点不同,使得有人机的安全性分析与管理措施不完全适用于无人机系 统。首先,对无人机系统的飞行事故进行统计分析,得出无人机系统事故的特点;然后,合理借鉴有人机的安全 性分析,定义无人机系统的安全性,提出无人机系统事故的严酷度等级划分及相应的危险可接受度;最后,从设 计、机组训练及使用操作三方面进行危险源分析。本文提出的无人机系统不安全事件发生可能性等级划分和 危险源定性分析,可为后续无人机安全管理框架的构建奠定基础。     

Flight safety performance of the microwave landing system

The microwave landing system (MLS), which is scheduled to be implemented progressively over the next 10 years, is intended to supply the instrument landing system (ILS) as the international standard landing aid. MLS has been demonstrated to be superior to ILS from both performance and reliability standpoints, yet considerable debate persists on its relative merits. Although tolerance criteria for flight safety are embedded in these comparisons, flight safety has not been a major component of these discussions. The reasons why flight safety has not been an issue are addressed, and observations on the flight safety of MLS are related from a systems point of view. The effect of MLS on airport capacity is identified as a central issue. Observations are derived from a review of available documentation and operational results to date as well as discussions with the participants     

面向控制的高超声速飞行器总体优化设计方法

从前期高超声速飞行器基础理论以及关键技术的研究到现今的飞行试验可以看出,高超声速飞行器在总体设计阶段过晚考虑飞行器动力学特性和控制性能会给后期控制系统设计带来极大的困难。在对两类高超声速飞行器试飞与控制相关问题分析的基础上,提出了面向控制的高超声速飞行器总体优化设计方法,给出了面向控制的总体优化设计研究方法、思路和模块框架。     

结冰飞机着陆阶段飞行安全包线确定及操纵应对策略

结冰会导致飞行安全包线收缩、严重威胁飞行安全,研究结冰后安全包线变化对于操纵应对策略设计及提高飞行安全具有重要意义。以美国国家航空航天局（NASA）的项目飞机GTM（Generic Transport Model）为研究对象,通过对飞机的气动参数进行多项式拟合,建立了结冰飞机纵向通道的动力学模型。为了得到能随结冰程度变化的安全包线,将可达性分析理论引入到对结冰飞机着陆过程的安全性分析。提出将正向可达集与反向可达集的交集作为飞行安全包线,其中可达集的确定是基于水平集方法求解哈密尔顿-雅克比方程的最优解。最后针对不同程度的结冰条件进行了操纵时域验证,并提出了相应的操纵控制策略。研究结果表明,轻度结冰对安全包线影响较小,整个着陆过程的飞行状态始终能在最优控制指导下保持在安全包线以内;但对于重度结冰,飞行安全包线收缩严重,常规操纵已经很难使飞机达到着陆要求,需要进行飞行状态改出处理。研究结果为指导飞行操纵及实时包线保护打下基础。     

电传操纵飞机起飞着陆动态特性仿真研究

 以刚体系动力学理论为依据,结合飞机起飞着陆运动学特征,建立了起落架-机身组合刚体6自由度全量飞机方程。提出的阶跃跟踪驾驶员时域数学模型,有助于评价起飞着陆阶段人-机系统的飞行品质。然后建立机械操纵系统、电传操纵系统的数学模型,并编制非线性全量时域仿真程序,对起飞着陆动态特性做出了综合的全面的定量分析,其结果与试飞情况吻合。     

Design of Flight Control System for a Small Unmanned Tilt Rotor Aircraft

A tilt rotor is an aircraft of a special kind, which possesses the characteristics of a helicopter and a fixed-wing airplane. However, there are a great number of important technical problems waiting for settlements. Of them, the flight control system might be a critical one. This article presents the progresses of the research work on the design of flight control system at Nanjing University of Aeronautics and Astronautics (NUAA). The flight control law of the tilt rotor aircraft is designed with the help of an inner/outer loop control structure and an eigenstructure assignment algorithm on the basis of a proper mathematical model already verified by the wind tunnel tests. The proposed control law has been born out through the construction of the flight control system and the flight tests. Now, the flight tests are still underway on a prototype of small unmanned tilt rotor aircraft. The results have evidenced the credibility of the aircraft design and the effectiveness of the flight control system for the tilt rotor working in the helicopter mode. A full envelope flight test is planned to carry out further researches on the flight control law.     

计入螺旋桨干扰的倾转机翼飞行器气动特性研究

倾转机翼飞行器不仅拥有直升机固有的垂直起降能力,还具备传统固定翼飞行器特有的高速巡航的特点,是目前军民用飞行器研究的热点之一。针对传统倾转机翼飞行器存在螺旋桨气动效率低、倾转机构复杂的问题,提出四发串列式倾转机翼垂直起降布局形式,对该布局飞行器进行总体设计,完成螺旋桨周围流场特性、螺旋桨间干扰特性、螺旋桨和机翼之间干扰特性的研究分析,并制作验证机进行验证。结果表明:该布局很好地解决了螺旋桨气动效率低、传动机构复杂的问题,具有较强的可实现性及实用性。     

大型水陆两栖飞机侧风起降的滑流影响分析

大型水陆两栖飞机AG600的动力装置为安装在机翼上的4台同向旋转涡轮螺旋桨发动机，针对1：15缩比模型带动力风洞试验显示的螺旋桨滑流对侧风起降状态的偏航力矩不稳定影响，对全机带动力风洞试验模型进行了大规模并行非定常数值计算，再现了风洞试验现象，通过流动机理分析明确其产生原因主要是左侧滑时右外翼分离和垂尾背鳍涡破裂，这些原因和数值模拟的准确性也为后期的风洞试验所证实。考虑到模型风洞试验中尺度限制造成的低雷诺数和高螺旋桨转速，为保证飞行安全，继续采用该非定常方法对全尺寸飞机真实侧风起降状态进行了详细数值分析和偏航稳定性评估。研究结果显示，在飞行雷诺数和螺旋桨转速下，相同侧风范围内风洞试验显示的流动不稳定因素基本消失，偏航稳定性允许的侧风范围明显增加。本研究实现了四发螺旋桨飞机起降状态横向气动特性的滑流影响非定常数值分析，建立了基于计算流体力学的风洞与飞行雷诺数效应的相互关系，进行了偏航稳定性的虚拟试飞评估，研究成果也为AG600飞机的首飞和飞行试验所验证。     

Multiple hierarchy risk assessment with hybrid model for safety enhancing of unmanned subscale BWB demonstrator flight test

To explore the low-speed characteristics of the Blended-Wing-Body (BWB) configuration for future civil aircraft, a series of unmanned subscale demonstrators have been developed and tested by our research team. During this process, specific safety risks deriving from uncertain design features, system unreliability, and insufficient personnel experience caused continuous flight test mishaps and the risk mechanism was not clear. Local and trial-and-error learning driven safety improvements took few effects on mishap prevention, so our focus was turned to look for systematic safety strategies. This paper establishes a systems theory based hybrid model to integrate the physical system reliability analysis techniques with the system dynamics method for illustrating the multiple risk interactions of the demonstrator flight test involving organizational, human resource and technical system factors. Using the prior BB-5 demonstrator as a case, the hybrid model simulation represents its historical risk evolution process, which verifies the model rationality. Derived risk control strategies reduced the mishap rate of a new demonstrator called BB-6 Sprit. The paper also shows the extended hybrid model can be applied on safety management of unmanned aerial vehicles from the initial period of vehicle development.     

DFBW飞机人-机闭环纵向着陆特性研究

本文根据试飞员的飞行体会和一组试飞曲线,提出驾驶员参数随着着陆过程变化的频率域模型,建立装有DFBW飞机的人-机闭环系统数学模型,编制非线性全量时域仿真程序,对纵向着陆过程动态作了全面的定量分析,其结果与装有MCS飞机的试飞情况吻合,验证了本文建模、程序可信度和精度,从而得出某DFBW飞机着陆特性是可被驾驶员接受的一些有益结论。     

先进舰载战斗机强度设计技术发展与实践

舰载战斗机是航空母舰上的主要武器,为满足舰面起飞、着舰和停放等要求,舰载机需围绕起落架系统、拦阻钩系统和翼面折叠系统等"特征结构"进行设计。先进舰载战斗机着舰冲击能量是陆基飞机的6倍以上、拦阻带来的水平载荷超过陆基飞机的15倍,因此特征结构的高载荷对强度设计提出了更高的要求。围绕舰载机"特征结构"及"特征载荷",开展了主要的设计工作,包括："特征载荷"计算,即起落架载荷、拦阻载荷和折叠载荷计算;"特征结构"的强度设计及试验验证,包括起落架系统、拦阻系统、翼面折叠系统的动力学仿真计算、静/疲强度分析、折叠翼面的非线性颤振分析以及综合试验验证;"特征载荷"对其他机体结构强度的影响分析,包括着舰载荷对起落架支撑结构强度的影响、拦阻载荷对后机身支撑结构强度的影响、拦阻着舰的全机动力学响应以及着舰载荷与拦阻载荷的共同作用对全机结构强度的影响;体现舰载机"特征结构"强度特点的试验验证方法等。上述研究成果已成功应用于先进舰载战斗机设计中。     

在飞行中进行风场估计

在飞行中如何获得较精确的风场信息,对于飞行导航、控制和管理系统的研究都是一个重要的、急需解决的问题。目前飞机上无高精度的风测量手段.为此,本文将卡尔曼滤波技术应用到风场估计中去,并提出了一个简单实用的风模型。仿真结果表明该方案是成功的。本文属某无人机航迹控制研究计划的一部分.从这一工程实例出发,详细说明了利用卡尔曼滤波技术进行风场估计的全过程,其中包括飞机地速的估计,风测量精度分析等内容。     

一种减小再入飞行器侧向气动非线性的布局优化方法

为改善升力式再入飞行器在跨声速段出现的侧向气动特性非线性问题,发展了一种基于Kriging代理模型的自适应迭代气动布局优化方法。设计了一种常规升力式再入飞行器布局,计算了该布局在跨声速段的侧向气动力,分析了可能影响侧向气动特性的机翼布局参数。根据气动布局优化流程,计算了气动布局样本气动特性,建立了布局参数到侧向力矩系数导数的代理模型,完成了以减小飞行器侧向非线性为目标的布局优化设计。优化布局的气动特性计算结果表明,所发展的方法是可行和有效的。该项研究为再入飞行器减小侧向气动非线性提供了新的布局设计途径,有利于降低控制系统设计难度,保障飞行安全。     

High accuracy navigation and landing system using GPS/IMU systemintegration

In this paper, the accuracy, integrity and continuity of function requirements for automatic landing systems using satellite navigation systems are discussed. Such a landing system is the integrated navigation and landing system (INLS) developed by Deutsche Aerospace (DASA/Ulm, Germany). The system concepts of the INLS are presented. It is shown how an INLS, based on system integration of a satellite navigation system (e.g., GPS) in realtime differential mode with an inertial measurement unit (IMU) in the accuracy class of an attitude and heading reference system (AHRS), can meet the requirements: the results given are mainly devoted to the accuracy issues. Using Kalman filter techniques, an in-flight calibration of the IMU is performed. The advantage of system integration, especially in dynamic flight conditions and during phases of flight with satellite masking, is explained. The accuracy, integrity and continuity of function of the INLS were proven by means of flight tests in a commuter aircraft using a laser tracker as a reference. These flight tests have shown that the short-term accuracy (<60 seconds) of the AHRS used within the INLS has been improved from low cost sensor quality to the accuracy of a high quality laser inertial navigation system (LNIS). With the presented INLS, a landing at any airfield, not equipped with conventional Instrument Landing System (ILS) or Microwave Landing System (MLS), is possible by using a very cost effective system. The INLS is a high accuracy navigation and landing system designed to be used instead of conventional landing systems at small airfields and to fill operational gaps of conventional navigation and landing systems in cruise and approach on large airports     

变后掠变展长翼身组合体系统设计与特性分析

为了探索可变形飞行器气动、结构和控制关键技术,在可变后掠角及展长的翼身组合体风洞试验模型系统设计与特性分析方面开展了研究。系统设计包括总体方案设计、近似理论分析与计算流体力学(CFD)数值模拟、结构与控制技术集成;特性分析包括结构特性、控制特性、定常与非定常气动特性的测试及其分析。结果表明:大尺度变形能显著改变飞行器的升力、阻力和升阻比等气动特性,进而使可变形飞行器能适应多种环境和任务,因而在全飞行周期中比传统固定外形飞行器具有更优的性能。     

舰载飞机着舰精确轨迹控制研究

针对舰载机着舰过程的精确航迹控制要求,利用现有机上的控制设备,采用系统综合设计的方法,给出了两种航迹控制系统———风参考航迹控制系统和惯性参考航迹控制系统,通过仿真分析,给出了系统的性能差异。     

新概念机翼尾流特性实验

大型飞机常采用开启襟翼以增大机翼升力系数,实现较大迎角的起飞和降落,而机翼在大迎角状态下,翼尖会产生能量集中且自由消散时间长的飞机尾涡,严重影响后续起降飞机的安全。基于Rayleigh-Ludwieg不稳定性,提出一种新概念飞机襟翼布局,通过水槽实验发现:新概念布局的襟翼对翼尖涡的消散具有明显的促进作用,不同参数组合下襟翼涡对翼尖涡的运动特性和能量变化的影响均有不同。实验结果也为飞机尾流控制的研究提供了参考,在满足飞行力学设计的基础上,合理运用增升装置构建四涡系统可以有效促进飞机尾流的消散,提高机场飞机起降效率。     

Impact of mission requirements and constraints on conceptual launch vehicle design

The objective of this paper is to analyse the impact of mission requirements and constraints on both the optimum vehicle design and the effects on flight path selection for two types of reusable two-stage-to-orbit launch vehicles. The first vehicle type considered provides horizontal take-off and landing capabilities and is intended to be propelled by an airbreathing propulsion system during stage 1 flight. The second vehicle type assumes a vertical launch and is accelerated by a rocket propulsion system during the booster stage ascent flight. The analysis employs a design tool for simultaneous system and mission optimization. It consists of a CAD-based preliminary vehicle design tool, aerodynamic and aerothermodynamic calculation software, flight simulation programs, and a two-level decomposition optimization algorithm enabling simultaneous system and flight optimization. The results to be presented show that the cruise flight requirement for an European launched mission of the airbreathing vehicle results in a loss of 60 % payload mass as compared to a mere accelerated ascent for a near equatorial mission into the same target orbit assuming constant take-off mass. The strong dependencies of mission requirements on both the optimal vehicle design and the ascent performance are determined for the rocket-powered vehicle type by varying the inclination and altitude of the target orbit.