LEO太阳电池一次放电模型研究

空间等离子体作用下,太阳电池一次放电是诱发二次放电的主要原因。目前缺乏适合工程应用的一次放电快速评估模型。文章借鉴辉光放电理论,针对太阳电池三联点结构提出一次放电一维简化模型,用于评估太阳电池设计对放电脉冲强弱的影响。模型计算结果表明,增加玻璃盖片厚度和电池串联间隙有助于提高一次放电起始电压,一次放电频率随着太阳电池偏压和表面二次电子发射系数增加而增大,放电电流随着太阳电池偏压和电池阵电容增加而增强。该模型计算结果与试验测试结果基本一致,且比其他模型计算过程简单,可以为太阳电池设计中一次放电现象快速评估提供参考。     

空间超高速撞击碎片云前端速度的预测模型

文章利用一组二级轻气炮发射2017-T4 铝质球形弹丸撞击6061-T6单层铝板的地面试验数据,通过选择适当的函数模型,采用多元函数拟合的方法,得到了碎片云前端速度与靶板厚度、弹丸直径和弹丸速度关系的三元二阶多项式模型。再用另外一组数据对该模型进行检验,验证了其对碎片云前端速度具有较好的预测效果。将以上两组数据同样用于建立“无量纲化”模型进行碎片云前端速度预测,并与前述多项式模型的预测结果进行比较发现,该多项式模型预测的方均根误差及平均相对误差均明显优于“无量纲化”模型。该多项式模型可用于预测空间碎片撞击航天器产生的碎片云的前端速度,有助于航天器的空间碎片防护设计。     

A fast numerical approach for Whipple shield ballistic limit analysis

Whipple shield is widely used on manned spacecraft, numerical simulation is an important way for obtaining the ballistic limit. The large population of particles and the large space span of Whipple shield simulation model restrict the computational efficiency. A fast numerical approach is presented for Whipple shield ballistic limit analysis. First, the critical penetration analysis of the rear walls is converted into specific impulse analysis delivered by the secondary debris cloud, because the maximum of specific impulse is the main determinant of the penetration. The dual plate simulation model is then converted into single plate model and the population of particles is reduced. Second, based on the isotropic expansion theory of secondary debris cloud, the specific impulse analysis is further converted into particle position and velocity analysis when the stable secondary debris formed. The space span of the simulation model is reduced. An example of Whipple shield ballistic limit analysis is provided for the verification of the fast numerical approach, it shows that this approach can significantly increase the computation efficiency with acceptable accuracy.     

Investigation of Hypervelocity Impacts on Retrieved Surfaces by Direct Simulation Monte Carlo

Hypervelocity impacts on the retrieved Hubble Space Telescope (HST) solar array was investigated by our extended Direct Simulation Monte Carlo (DSMC) model and the result matches well with the measured data in most of the particle mass range. The revelation of the altitude dependence of particles flux onto the retrieved surfaces provides some insight in understanding the observed higher flux onto Mir space station relative to that onto Long Duration Exposure Facility (LDEF). Our analysis suggests that a slightly higher primary flux onto Mir space station would be possible even without taking into account the secondary impacts, as a result of the existence of the highly eccentric orbits of small-sized debris. It is, furthermore, predicted that 43% of the measured impact flux onto Mir station in PIE experiment may be from secondary impacts, and a corresponding 7% for the detectors in Echantillions experiment.     

目标捕获后航天器组合体的角动量转移与抑振规划

针对失稳目标捕获后航天器组合体的位姿调整与稳定问题，提出一种组合体角动量转移与振动抑制复合规划方法。首先建立了同时考虑了空间机械臂、目标卫星太阳翼、服务卫星太阳翼等柔性构件的航天器组合体动力学模型。然后提出角动量转移优化方法，规划机械臂最终构型，保证组合体相对稳定后的角速度最小；基于粒子群算法设计了机械臂最优抑振轨迹规划方法，抑制角动量转移过程中的机械臂和太阳翼的柔性振动。最后通过数值仿真验证了规划方法的有效性。仿真结果表明，该方法能够有效实现组合体的角动量转移，并显著降低组合体的柔性振动，具有工程实用性。     

Computational methodology to predict satellite system-level effects from impacts of untrackable space debris

This paper presents a computational methodology to predict the satellite system-level effects resulting from impacts of untrackable space debris particles. This approach seeks to improve on traditional risk assessment practices by looking beyond the structural penetration of the satellite and predicting the physical damage to internal components and the associated functional impairment caused by untrackable debris impacts. The proposed method combines a debris flux model with the Schäfer–Ryan–Lambert ballistic limit equation (BLE), which accounts for the inherent shielding of components positioned behind the spacecraft structure wall. Individual debris particle impact trajectories and component shadowing effects are considered and the failure probabilities of individual satellite components as a function of mission time are calculated. These results are correlated to expected functional impairment using a Boolean logic model of the system functional architecture considering the functional dependencies and redundancies within the system.     

Radiation transport modeling and assessment to better predict radiation exposure, dose, and toxicological effects to human organs on long duration space flights.

NASA is very interested in improving its ability to monitor and forecast the radiation levels that pose a health risk to space-walking astronauts as they construct the International Space Station and astronauts that will participate in long-term and deep-space missions. Human exploratory missions to the moon and Mars within the next quarter century, will expose crews to transient radiation from solar particle events which include high-energy galactic cosmic rays and high-energy protons. Because the radiation levels in space are high and solar activity is presently unpredictable, adequate shielding is needed to minimize the deleterious health effects of exposure to radiation. Today, numerous models have been developed and used to predict radiation exposure. Such a model is the Space Environment Information Systems (SPENVIS) modeling program, developed by the Belgian Institute for Space Aeronautics. SPENVIS, which has been assessed to be an excellent tool in characterizing the radiation environment for microelectronics and investigating orbital debris, is being evaluated for its usefulness with determining the dose and dose-equivalent for human exposure. Thus far. the calculations for dose-depth relations under varying shielding conditions have been in agreement with calculations done using HZETRN and PDOSE, which are well-known and widely used models for characterizing the environments for human exploratory missions. There is disagreement when assessing the impact of secondary radiation particles since SPENVIS does a crude estimation of the secondary radiation particles when calculating LET versus Flux. SPENVIS was used to model dose-depth relations for the blood-forming organs. Radiation sickness and cancer are life-threatening consequences resulting from radiation exposure. In space. exposure to radiation generally includes all of the critical organs. Biological and toxicological impacts have been included for discussion along with alternative risk mitigation methods--shielding and anti-carcinogens.     

Debris area distribution of spacecraft under hypervelocity impact

Cross-sectional area is an important parameter for spacecraft breakup debris as it is the directly measured data in space observation. It is significant for observing and analysing the spacecraft breakup event to accurately modelling the area distribution of the breakup debris. In this paper, experimental study has been performed on debris area distribution characteristics of spacecraft under hypervelocity impact. The tests are carried out at the ballistic ranges of CARDC. Aluminium projectiles are launched to normally impact the simulated spacecrafts at about 3.0 km/s. The simulated spacecrafts are made up of aluminium plates, filled with some simulated electronics boxes, each of which was installed with a circuit board. “Soft-catch” devices are used to recover the breakup fragments. The test results show that: 1) the relationship between the cross-sectional area and the characteristic length of debris, which can be obtained in the logarithmic coordinates by linear fitting, represents the debris shape characteristic in a certain extent; 2) the area-to-mass ratios of fragments show normal distributions in the logarithmic coordinates; 3) debris made of different materials can be distinguished by different peaks on the distribution curves; 4) the area-to-mass ratio distributions can be expressed by a linear superimposition of several normal functions which represent the main materials of the spacecraft.     

空间微小碎片对光学玻璃的污染效应研究

航天器在轨服役期间会遭受到大量空间微小碎片撞击作用。这些微陨石和空间微小碎片可能在光学玻璃表面碰撞产生陷坑,也可能吸附在航天器光学玻璃表面造成污染。文章介绍了采用静电式粉尘加速器使微米级铝粉末低速撞击K8光学玻璃,在玻璃表面吸附大量的粉尘粒子。研究结果表明,被铝粒子污染的光学玻璃透过率明显下降。透过率下降与污染程度成比例。对光学玻璃表面单个粒子陷坑计算分析表明,粒子吸附在玻璃表面时,比粒子陷入一定深度造成的光线衰减更大。     

空间太阳能阵列光照的建模仿真及优化

针对空间救援飞行器在无控模式下，固定的太阳能阵列可能受到光线照射面积不足的问题，提出采用建模仿真及优化阵列布局的方法来提高任意光照角度下的受光面积。通过建立参数化驱动的空间飞行器外形几何模型、任意角度下的光线投射模型和考虑自身结构阴影遮挡的光照模型，研究空间任意光照角度下太阳能阵列接收光线照射的有效面积，并得到最低受光面积。基于建立的光照模型，采用遗传算法，对影响太阳能阵列布局的关键参数进行优化。可视化仿真结果校验了模型的有效性，优化结果显示算法收敛且获得了最优结果，满足空间无控飞行任务要求。     

USA-193 decay predictions using public domain trajectory data and assessment of the post-intercept orbital debris cloud

In early 2008, the need arose to predict the orbital decay of the American spacecraft USA-193, whose characteristics, function and orbit were classified information. With no orbit data and independent Italian tracking capability available, we turned our attention on the orbits determined by a worldwide network of about 20 visual satellite observers. The orbits of USA-193 obtained from their visual observations were therefore used as the sole source of orbit information. Contrary to our expectations, this exercise was extremely successful and we learned a lot in the process. The orbits provided by the visual observers were very accurate for such a low satellite (although the minimum and very stable level of solar activity helped considerably); however, data gaps of a few days were sometimes possible, due to unfavorable pass geometry or weather and light conditions. In any case, the orbital period and the semimajor axis were so accurate that it was possible for us to obtain very good decay fits using special perturbation software, including various atmospheric density models together with all the other relevant perturbing accelerations. We were therefore able to estimate accurate values of the ballistic parameter and the resulting decay and reentry predictions were extremely stable. Amateur optical observations and images of USA-193 had also led to a rough estimation of the shape and sizes of the satellite, revealing that the solar arrays had never been deployed. With this information, and taking into account our estimates of the ballistic parameter, we obtained reasonable and consistent values of the spacecraft mass. Based on previous reentry fragmentation analyses, we were then able to guess the expected USA-193 casualty area, casualty expectancy, debris ground footprint and probability of impact in Italy. Lastly, after the decision by the US Government to destroy the satellite, we independently predicted the interception time windows and the post-event ground tracks. Following the successful spacecraft breakup, we analyzed the evolution of the resulting debris cloud and assessed its (very limited) adverse impact on the circumterrestrial environment.     

Modelling of Ejecta as a Space Debris Source

When a micro-debris or a micrometeoroid impacts a spacecraft surface, a large number of secondary particles, called ejecta, are produced. These particles can contribute to a modification of the debris environment: either locally by the occurrence of secondary impacts on the components of complex and large space structures, or at great distance by the formation of a population of small orbital debris. This paper describes firstly, the ejecta overall production, and secondly, the lifetime and the orbital evolution of the particles. Finally the repartition of ejecta in LEO is computed. Some results describing the population as a function of size and altitude are presented.     

Modes of uncontrolled rotational motion of the <Emphasis Type="Italic">Progress M-29M</Emphasis> spacecraft

We have reconstructed the uncontrolled rotational motion of the Progress M-29M transport cargo spacecraft in the single-axis solar orientation mode (the so-called sunward spin) and in the mode of the gravitational orientation of a rotating satellite. The modes were implemented on April 3–7, 2016 as a part of preparation for experiments with the DAKON convection sensor onboard the Progress spacecraft. The reconstruction was performed by integral statistical techniques using the measurements of the spacecraft’s angular velocity and electric current from its solar arrays. The measurement data obtained in a certain time interval have been jointly processed using the least-squares method by integrating the equations of the spacecraft’s motion relative to the center of mass. As a result of processing, the initial conditions of motion and parameters of the mathematical model have been estimated. The motion in the sunward spin mode is the rotation of the spacecraft with an angular velocity of 2.2 deg/s about the normal to the plane of solar arrays; the normal is oriented toward the Sun or forms a small angle with this direction. The duration of the mode is several orbit passes. The reconstruction has been performed over time intervals of up to 1 h. As a result, the actual rotational motion of the spacecraft relative to the Earth–Sun direction was obtained. In the gravitational orientation mode, the spacecraft was rotated about its longitudinal axis with an angular velocity of 0.1–0.2 deg/s; the longitudinal axis executed small oscillated relative to the local vertical. The reconstruction of motion relative to the orbital coordinate system was performed in time intervals of up to 7 h using only the angularvelocity measurements. The measurements of the electric current from solar arrays were used for verification.     

考虑太阳帆板振动的空间绳系拖曳动力学与控制

针对使用空间绳网捕获带有太阳帆板等柔性附件的大型失效航天器的碎片清除任务,充分考虑了拖曳过程中柔性附件产生的振动对系统的稳定造成的影响。首先采用凯恩方法建立了失效航天器绳系拖曳系统动力学模型,在建模过程中充分考虑系绳的质量和振动、帆板的振动、系统的轨道运动对姿态的影响等,使动力学模型更加详细和完整,且该动力学模型不受失效航天器所处位置的限制,适用于任意轨道上的失效航天器的拖曳离轨任务;之后根据平衡状态的特点,求取了系统的平衡解,并在平衡解附近对动力学方程线性化,然后采用李雅普诺夫方法分析了系统的稳定性及各参数的变化规律;并针对失效航天器可能产生的姿态章动设计了常值张力切换控制律;最后采用数值仿真的方法分析了失效航天器的帆板振动对绳系拖曳过程的影响,校验了控制律的有效性。     

球形弹丸高速撞击航天器防护结构的数值模拟分析

给出了空间碎片超高速撞击航天器双层防护结构模型，采用非线性有限元方法中的光滑粒子流体动力算法，计算了球形弹丸对航天器双层防护墙结构超高速撞击过程，获得了弹丸穿过第一层防护墙后，碎裂形成颗粒云团及其对第二层防护墙的损伤效应。计算结果表明多层防护墙结构能够有效地缓减高速空间碎片对航天器的破坏作用。     

航天器典型防护结构节点分离FEM的数值模拟

建立了一种航天器防护结构超高速碰撞数值模拟的节点分离有限元方法。通过重合节点网格转换和添加节点集约束建立了节点分离有限元模型。在显式积分迭代中,将达到断裂判据的节点集解离,从而生成裂纹。对网格畸变问题进行分析,并建立了几何识别方法,进而删除畸变单元,改善了算法的稳定性。应用节点分离方法模拟了单层板超高速撞击问题,并分析了撞击速度对弹丸变形程度和碎片云形状的影响。应用节点分离方法对Whipple防护结构、填充式防护结构和多层网结构进行了模拟,获得了与实验一致的结果。多种算例表明,节点分离有限元方法改善了以往断裂侵蚀有限元方法处理网格畸变、碎片云模拟以及二次碎片云碰撞等方面的能力,对典型防护结构模拟具有很好的适用性,能够成为光滑粒子流体动力学(SPH)方法的有效补充和替代。     

A Technique for Estimating the Space Debris Density from the Data of Onboard Recording Systems

A three-dimensional mathematical model and a program complex for modeling the external effect of small-sized space debris particles on a spacecraft are developed. On the basis of the rectangular contributions method a new technique is developed for restoring the density of small-sized space debris from a small number of recorded debris collisions with recording sensors. From the form of the density function the total number of points having reached the spacecraft surface is restored. The comparative results of modeling are presented.     

载人航天器舱内辐射环境及剂量分析

构建载人航天器模型,利用Geant4软件计算了银河宇宙射线中的质子穿过载人航天器后在水模体中的总吸收剂量以及次级粒子吸收剂量,并且统计了不同种类的次级粒子在水模体中的总数量分布。计算结果表明,次级粒子引起的辐射剂量所占比例为50%,且二次电子总数量达到了10~7量级。     

A Review of Hypervelocity Debris Testing at the Air Force Research Laboratory

In this paper, we describe a compact, low cost, fast turn-around-time technique used at the Air Force Research Laboratory to study hypervelocity debris impact effects on spacecraft structures and components. The technique described was used to study debris effects in the areas of: shock physics, debris-produced contamination, chemical analyses of the impact ejecta and debris initiated spacecraft discharge. Examples of research results obtained with the technique are presented and illustrate problems encountered in the field of space debris effects on spacecraft.     

卫星磁力矩器磁场效应仿真分析

磁力矩器是卫星上磁性较大的部件之一,局部的强磁场是影响卫星周围带电粒子分布的主要原因。为了定量分析磁力矩器与等离子体相互作用,文章基于磁场与运动粒子的耦合模型,利用有限元数值分析软件仿真了典型轨道航天器上磁力矩器工作时周围带电粒子入射轨迹变化及电荷(粒子数)分布。结果表明,受磁场作用,带电粒子在接近磁力矩器本体时会发生偏转,且偏转幅度随电子能量降低而增大;由磁场引起的这种偏转效应导致带电粒子不均匀入射到卫星内。