Studying characteristics of traveling ionospheric disturbances using U-shaped traces on vertical incidence ionograms

This paper presents a case study when due to the descending additional U-shaped trace on vertical incidence ionograms, increased critical frequency stabilizes. This corresponds to an ionospheric disturbance that moves toward the ionosonde and then stays overhead.Within a 2D model, traveling ionospheric disturbances (TIDs) are superimposed on the inverted background ionosphere. So ray tracing is used to obtain propagation paths through non-stratified ionosphere thus synthesizing the disturbed ionogram traces. Investigated are changes in the cusp shape caused by varying TID parameters. A cusp-fitting method to determine the TID amplitude, spatial scale, and horizontal drift velocity are shown.     

Adaptation of the bottomside electron density profile of the IRI model to data of topside radiosounding

A method is proposed for reconstructing the electron density profiles N(h) of the IRI model from ionograms of topside satellite sounding of the ionosphere. An ionograms feature is the presence of traces of signal reflection from the Earth's surface. The profile reconstruction is carried out in two stages. At the first stage, the N(h) –profile is calculated from the lower boundary of the ionosphere to the satellite height (total profile) by the method presented in this paper using the ionogram. In this case, the monotonic profile of the topside ionosphere is calculated by the classical method. The profile of the inner ionosphere is represented by analytical functions, the parameters of which are calculated by optimization methods using traces of signal reflection, both from the topside ionosphere and from the Earth. At the second stage, the profile calculated from the ionogram is used to obtain the key parameters: the height of the maximum hmF2 of the F2 layer, the critical frequency foF2, the values of B0 and B1, which determine the profile shape in the F region in the IRI model. The input of key parameters, time of observation, and coordinates of sounding into the IRI model allows obtaining the IRI-profile corrected to real experimental conditions. The results of using the data of the ISIS-2 satellite show that the profiles calculated from the ionograms and the IRI profiles corrected from them are close to each other in the inner ionosphere and can differ significantly in the topside ionosphere. This indicates the possibility of obtaining a profile in the inner ionosphere close to the real distribution, which can significantly expand the information database useful for the IRTAM (IRI Realmax Assimilative Modeling) model. The calculated profiles can be used independently for local ionospheric research.     

Estimation of ground range on the sweep frequency backscatter leading edge

The high frequency management system with backscatter radar supplies the real time ionosphere channel conditions to high frequency users, which leads to the demand for the ground range between the radar location and the scatters on the distant ground. The ionosphere electron density profile is usually inversed to obtain the ground range. An inversion algorithm, with which the ground range on the leading edge of the backscatter ionograms can be obtained without electron density, is presented in this paper. The ray path geometry of the backscatter sounding and the change in the group path on the leading edge with operating frequency are used to derive the ground range. Synthesized backscatter ionogram and experimental backscatter ionograms are processed to validate the algorithm. The results indicate that the algorithm is usable for high frequency management system.     

电离层中小尺度扰动的多频多普勒快速探测与分析

电离层反射回波的高频多普勒频移测量是研究电离层扰动的重要方法之一.利用基于单频信号相位变化率测量的实时探测方法,获取连续高精度多频多普勒频高图,以实现中小尺度电离层扰动的快速探测研究.该方法被应用于敏捷式高性能电离层无线电多频探测系统样机平台.经验证在该平台上获取的多普勒频移分辨率可达0.039Hz,频高图探测周期最短小于1min.基于这种快速探测方法和平台在武汉观测站进行了较长时间的观测和数据采集,获得高精度多普勒频移并反演出电子浓度等值面法向运动速度,得到电离层反射寻常波的多普勒频高图和垂直扰动速度等信息,进而推演出电离层扰动随时间和空间的实时变化特征.对这些时域信号进行频谱分析,初步结果显示这些扰动主要是由极区活动激发的中国中部地区冬季出现率较高的中尺度TID.此外,对三种常用的电离层扰动反演分析方法进行了对比研究,结果显示电离层扰动的变化趋势基本一致,说明观测数据和研究方法可靠稳定,为多频多点电离层扰动的传播特性观测研究提供了基础.      

南京地区斜向加热电离层效应数值模拟

与垂直加热相比,斜向加热电离层具有灵活性高、影响范围广和便于实际操作等优势.在非偏区考虑欧姆吸收,基于电子能量方程和连续性方程构建电波斜向加热低电离层的物理模型,并利用IRI-2007和NRLMSISE-00经验模型提供的背景参数对南京地区斜向加热低电离层进行数值模拟,对比不同加热条件下电子温度和电子密度的扰动情况.研究结果表明:电波加热效果随入射仰角和有效辐射功率的增大而增大;电子温度和电子密度增幅随电波频率增大而减小;X波模比O波模造成的电子温度扰动幅度和电子密度扰动幅度更大,同时X波模比O波模能更快地使电子温度和电子密度达到稳定状态;一定范围内较小仰角、较低频率、较大有效辐射功率的电波能使电子密度更快达到稳定,后两者还能加快电子温度达到稳定的过程;电子温度达到稳定所需时间随入射电波仰角呈单峰变化,仰角为62°时达到最大.      

The investigation of the ionospheric variability by the radiotranslucence method

To provide a continuous single-point sounding of a large-scale region of the ionosphere the translucence method of studying the ionosphere utilizing satellite navigation system signals has been used. Simultaneous receiving the signals of GPS Navstar and GLONASS from different azimuths gives information on variations of the ionosphere in almost real time. Using measured data the reconstruction of the electron density profiles in the regions of intersection of a sounding ray with the ionosphere has been carried out. The translucence method was used to investigate the ionosphere effects of a partial solar eclipse (PSE) that occurred on 11.08 1999 by probing of the ionosphere with different GPS system signals in the Zwenigorod region.     

Physical and model interpretation of HF radio propagation on the St. Petersburg–Longyearbyen (Svalbard) path

HF radio wave observations have been carried out with an oblique ionospheric sounding (OIS) method on the radio path from St. Petersburg to Longyearbyen (Svalbard), and experimental ionograms were obtained for December 2001. These ionograms have been analysed to investigate the impact of the main ionospheric trough (MIT) and magnetic disturbances on the signals on this path. The observations during weakly disturbed (K_р = 2) magnetic conditions on 14–15 December 2001 were compared with predictions from ray-tracing through a numerical model of the ionosphere. The ray-tracing computer program synthesizes the OIS ionograms by means of the “shooting method”. This method calculates trajectories of HF radio waves for different values of elevation angle and transmission frequency. There was a variety of calculated trajectories, from which we choose those which reach the receiver, and the selected paths provide a synthesis of the oblique ionograms. To simulate HF radio wave propagation, we apply a three-dimensional distribution of the electron density calculated with the mathematical model of the high-latitude ionosphere developed in the Polar Geophysical Institute (PGI). These numerical simulations permit us to interpret specific peculiarities of the OIS data such as abnormal propagation modes, increased delays of signals, enhanced MOF (maximum observed frequency) values etc. New results of the study are summarised as follows. (1) An unusual feature of the propagation along the path is the change of propagation mechanism during substorms on entering a path midpoint (or 1-hop reflection point) to the MIT. (2) Even weak substorms, having the distinguished intensities, lead to the appearance of different types of irregularities observed by the CUTLASS radar and therefore to the different propagation modes and F2MOF values. (3) The PGI model of the ionosphere was first used for ray-tracing at high latitudes. The model results are basically in a good qualitative agreement with experimental observations. This model provides the satisfactory agreement between the calculated and experimental F2MOF values while not correctly representing the fine structure of the experimental OIS ionograms at night. An agreement between the calculated and experimental data is better for day and evening hours than at night.     

电离层掩星反演的TEC修正反演法

电离层掩星数据反演的传统方法是采用改正TEC的Abel 变换反演法, 实际电离层的非球对称性会给电子密度的反演结果带来误差. 文中研究了利用TEC修正方法结合背景场来剔除TEC 受电子密度水平变化的影响, 改善球对称假设适用性, 提高反演精度, 并应用此方法于模拟掩星事件的反演. 结果表明, 与传统的Abel 变换反演相比, TEC 修正反演法能够减小反演误差. 用TEC 修正反演法对不同方法获取的背景场的反演结果比较表明, 背景场与实际场吻合的程度越高, 反演效果越好.      

基于小波分解与重构方法研究电离层偶发E层

电离层不规则体对卫星导航、通信、雷达系统等有重要影响.通过数值模拟及与实测数据的对比,论证基于小波分解与重构方法实现利用掩星数据反演电离层不规则体的可行性.以电离层偶发E层为例,利用国际参考电离层(IRI)模拟背景电离层电子密度分布,利用掩星探测的水平电子密度总含量δht反演不规则体信息,并与模拟数据进行比较.对200...     

Multi-beam sounding ionograms in the polar cap region: Absorption induced by proton precipitations

The simulation of the multi-beam ionograms in the polar cap region, assessing absorption effect is performed. It is reasonable to distinguish among four different mechanisms responsible for absorption: regular absorption due to solar UV illumination, absorption associated with energetic particles precipitation, absorption connected with X-rays flare and additional absorption in Auroral oval area. In this paper the absorption attributed to proton precipitations is envisaged. The computational model of the high-latitude ionosphere with irregularities oriented to application for the high frequency wave propagation problem was elaborated (Zaalov et al., 2005). A number of the quasi-vertical ionograms in the polar cap region were simulated on the basis of this model. A well-known algorithm (Sauer and Wilkinson, 2008) is applied for the absorption effects calculation. The simulated high-latitude ionograms with the absorption effect and the measured ionograms exhibit quite a good resemblance. This paper illustrates the importance of the understanding and taking into account the absorption effect in the presence of the various structural features in the polar ionosphere (in particular, patches of enhanced electron density) in interpreting ionosonde data.     

Method of the HF wave absorption evaluation based on GIRO network data

High frequency (HF) communication is strongly dependent on the state of the ionosphere, which specifies the mode structure of the radio wave propagating in ionosphere. Another core factor defining the strength of the HF signal at the receiving site is the ionospheric absorption. Accurate modelling the effect of absorption is an essential part of many studies of the HF propagation in the ionosphere.This paper proposes a method for estimating the absorption. The method is based on analysis of vertical sounding ionograms. The main idea of the approach is to compare the main parameters retrieved from measured and simulated ionograms. The combination of Global Ionospheric Radio Observatory (GIRO, http://giro.uml.edu) data and ionograms modelling allows for developing the empiric absorption model available at near real-time. The ionogram simulation taking into account absorption utilizes the NIM-RT (North Ionospheric Model and Ray Tracing) software. As a result, the proposed technique provides more reliable and accurate evaluation of minimum frequency at which echoes are observed in vertical incidence ionosonde soundings. The values of these frequencies should be used in the following simulation to optimize parameters in the empirical formulae for defining absorption HF wave in ionosphere.The ultimate objective of this work is the designing the method, which allows the simulating of HF radio channel accounting for regular absorption due to UV radiation of the Sun. Eventually it could be considered as some kind of the HF propagation forecasting.     

Modelling bottom and topside electron density and TEC with profile data from topside ionograms

The paper describes the technique that has been implemented to model the electron density distribution above and below the F2 peak making use of only the profiles obtained from the INTERCOSMOS-19 topside ionograms. Each single profile from the satellite height to the ionosphere peak has been fitted by a semi-Epstein layer function of the type used in the DGR model with shape factor variable with altitude. The topside above the satellite height has been extrapolated to match given values of plasmaspheric electron densities to obtain the full topside profile. The bottomside electron density has been calculated by using the maximum electron density and its altitude estimated from the topside ionogram as input for a modified version of the DGR derived profiler that uses model values for the foF1 and foE layers of the ionosphere. Total electron content has also been calculated. Longitudinal cross sections of vertical profiles from latitudes 50° N to 50° S latitude are shown for low and high geomagnetic activity. These cross sections indicate the equatorial anomaly effect and the changes of the shape of low latitude topside ionosphere during geomagnetic active periods. These results and the potentiality of the technique are discussed.     

Investigation of Satellite Trace (ST) and Multi-reflected Echo (MRE) ionogram signatures and its possible correlation to nighttime spread F development from Cyprus over the solar mini-max (2009–2016)

Multi-reflected echoes (MREs) and satellite traces (STs) are referred in literature as ionogram signatures of Travelling Ionospheric Disturbances (TIDs) which is a phenomenon that apparently drives spread F development mainly at nighttime mid-latitude ionosphere. A long-term statistical study has been undertaken to investigate the morphological aspect of these signatures over the lower midlatitude European station of Nicosia, Cyprus (35.19°N, 33.38°E geographic; magnetic dip. 29.38°N) by inspecting all ionograms recorded by the DPS-4D digisonde in the interval 2009–2016. The results underline the systematic manifestation of these TID signatures over Cyprus with a possible (although not quite clear) solar activity dependence and a distinctive seasonal and diurnal occurrence rate with a seasonal peak of STs during summer and of MREs during January to April. Based on the experimental results of the present study, the seasonal occurrence rate of MREs and STs is found to increase by 75% and 56% during high solar activity periods. Satellite traces are well known ionogram signatures of TIDs and mostly correlated to the nighttime spread F formation. The occurrence of mid-latitude spread Fs over European longitude sector normally increases during summer. The occurrences of TIDs are also prominent at this interval of the year over nighttime mid-latitude ionosphere. The presence of MREs as an ionogram signature of TIDs over mid-latitude ionosphere is unique in nature.     

Impact of geomagnetic storm of September 7–8, 2017 on ionosphere and HF propagation: A multi-instrument study

The present study reveals the features of ionospheric parameters variations during the geomagnetic storm of September 7–8, 2017. In particular, parameters of vertical (foF2, foEs) and oblique ionospheric sounding (MOF, modes), absorption level, Total Electron Content (TEC) and particle fluxes at high altitudes were under analysis. The storm was characterized by two Dst-index mimima and can be considered as a sequence of two storms: first - with Dstmin?=??142?nT at 02 UT on September 8th and second - with Dstmin?=??122?nT and at 15 UT on September 8th. It was found that these two storms had different impacts on the ionosphere and HF propagation at mid- and high-latitudes of Northern Hemisphere. The signals of vertical and oblique ionospheric sounding were present in all ionograms before the first storm. Further, at the maximum of the first storm these signals were totally absorbed. Then, before the second storm and during its maximum the signals were detected again in the ionograms due to the low absorption. GOES satellite data showed the significant burst of electrons and protons only during the first storm and small particle fluxes - during the second storm. This feature was also confirmed with GPS data: TEC increased during the first storm and decreased during the second storm.     

A new inversion algorithm for HF sky-wave backscatter ionograms

HF sky-wave backscatter sounding system is capable of measuring the large-scale, two-dimensional (2-D) distributions of ionospheric electron density. The leading edge (LE) of a backscatter ionogram (BSI) is widely used for ionospheric inversion since it is hardly affected by any factors other than ionospheric electron density. Traditional BSI inversion methods have failed to distinguish LEs associated with different ionospheric layers, and simply utilize the minimum group path of each operating frequency, which generally corresponds to the LE associated with the F₂ layer. Consequently, while the inversion results can provide accurate profiles of the F region below the F₂ peak, the diagnostics may not be so effective for other ionospheric layers. In order to resolve this issue, we present a new BSI inversion method using LEs associated with different layers, which can further improve the accuracy of electron density distribution, especially the profile of the ionospheric layers below the F₂ region. The efficiency of the algorithm is evaluated by computing the mean and the standard deviation of the differences between inverted parameter values and true values obtained from both vertical and oblique incidence sounding. Test results clearly manifest that the method we have developed outputs more accurate electron density profiles due to improvements to acquire the profiles of the layers below the F₂ region. Our study can further improve the current BSI inversion methods on the reconstruction of 2-D electron density distribution in a vertical plane aligned with the direction of sounding.     

Multi-station observation of ionospheric irregularities over South Africa during strong geomagnetic storms

This paper presents results pertaining to the response of the mid-latitude ionosphere to strong geomagnetic storms that occurred from 31 March to 02 April 2001 and 07–09 September 2002. The results are based on (i) Global Positioning Systems (GPSs) derived total electron content (TEC) variations accompanying the storm, (ii) ionosonde measurements of the ionospheric electrodynamic response towards the storms and (iii) effect of storm induced travelling ionospheric disturbances (TIDs) on GPS derived TEC. Ionospheric data comprising of ionospheric TEC obtained from GPS measurements, ionograms, solar wind data obtained from Advanced Composition Explorer (ACE) and magnetic data from ground based magnetometers were used in this study. Storm induced features in vertical TEC (VTEC) have been obtained and compared with the mean VTEC of quiet days. The response of the mid-latitude ionosphere during the two storm periods examined may be characterised in terms of increased or decreased level of VTEC, wave-like structures in VTEC perturbation and sudden enhancement in hmF2 and h′F. The study reveals both positive and negative ionospheric storm effects on the ionosphere over South Africa during the two strong storm conditions. These ionospheric features have been mainly attributed to the travelling ionospheric disturbances (TIDs) as the driving mechanism for the irregularities causing the perturbations observed. TEC perturbations due to the irregularities encountered by the satellites were observed on satellites with pseudo random numbers (PRNs) 15, 17, 18 and 23 between 17:00 and 23:00 UT on 07 September 2002.     

A realistic simulation framework to evaluate ionospheric tomography

Observation of the 3-dimensional (3-D) electron density of the ionosphere is useful to study large-scale physical processes in space weather events. Ionospheric data assimilation and ionospheric tomography are methods that can create an image of the 3-D electron density distribution. While multiple techniques have been developed over the past 30 years, there are relatively few studies that show the accuracy of the algorithms. This paper outlines a novel simulation approach to test the quality of an ionospheric tomographic inversion. The approach uses observations from incoherent scatter radar (ISR) scans and extrapolates them spatially to create a realistic ionospheric representation. A set of total electron content (TEC) measurements can then be simulated using real geometries from satellites and ground receivers. This data set, for which the ‘truth’ ionosphere is known, is used as input for a tomographic inversion algorithm to estimate the spatial distribution of electron density. The reconstructed ionospheric maps are compared with the truth ionosphere to calculate the difference between the images and the truth.To demonstrate the effectiveness of this simulation framework, an inversion algorithm called MIDAS (Multi-Instrument Data Analysis Software) is evaluated for three geographic regions with differing receiver networks. The results show the importance of the distribution and density of GPS receivers and the use of a realistic prior conditioning of the vertical electron density profile. This paper demonstrates that when these requirements are met, MIDAS can reliably estimate the ionospheric electron density. When the region under study is well covered by GPS receivers, as in mainland Europe or North America, the errors in vertical total electron content (vTEC) are smaller than 1 TECu (2–4%) . In regions with fewer and more sparsely distributed receivers, the errors can be as high as 20–40%. This is caused by poor data coverage and poor spatial resolution of the reconstruction, which has an important effect on the calibration process of the algorithm.     

从射电天文观测数据反演电离层行扰的相速

本文结合ＴＩＤｓ的形成机制及其测量技术，对它的传播特性作了有益于测量的讨论，指出：（１）ＴＩＤｓ是由两个正交波组成；（２）测量电子总含量所表征的ＴＩＤｓ与测量电子浓度所表征者同样有效，据此导出了从测量数据反演其相速的公式，并对波幅的抑制效应作了讨论。     

大功率无线电波与低电离层的相互作用

地面入射的大功率无线电波能加热电离层等离子体，引起电离层电子温度和密度的扰动，实现电离层的地面人工变态．本文中，着重考虑电波和电离层相互作用过程中的自吸收，构造一个自治的相互作用模型，在一定功率和频率的加热电波作用下，利用该模型计算了白天低电离层电子温度和由温度的变化而引起的电子密度的变化．计算结果表明，在白天低电离层，电波的自吸收在90km以下比较显著，而最大温度变化在70km高度上，大约增加了2倍．在α复合的假设下，电子密度变化幅度随高度的增加而减少，在70km处，大约增加55％、120km处则为4％左右．     

The variability and predictability of the IRI B0, B1 parameters over Grahamstown,South Africa

The International Reference Ionosphere (IRI) parameters B₀ and B₁ provide a representation of the thickness and shape, respectively, of the F2 layer of the bottomside ionosphere. These parameters can be derived from electron density profiles that are determined from vertical incidence ionograms. This paper aims to illustrate the variability of these parameters for a single mid latitude station and demonstrate the ability of the Neural Network (NN) modeling technique for developing a predictive model for these parameters. Grahamstown, South Africa (33.3°S, 26.5°E) was chosen as the mid latitude station used in this study and the B₀ and B₁ parameters for an 11 year period were determined from electron density profiles recorded at that station with a University of Massachusetts Lowell Center for Atmospheric Research (UMLCAR) Digisonde. A preliminary single station NN model was then developed using the Grahamstown data from 1996 to 2005 as a training database, and input parameters known to affect the behaviour of the F2 layer, such as day number, hour, solar and magnetic indices. An analysis of the diurnal, seasonal and solar variations of these parameters was undertaken for the years 2000, 2005 and 2006 using hourly monthly median values. Comparisons between the values derived from measured data and those predicted using the two available IRI-2001 methods (IRI tables and Gulyaeva, T. Progress in ionospheric informatics based on electron density profile analysis of ionograms. Adv. Space Res. 7(6), 39–48, 1987.) and the newly developed NN model are also shown in this paper. The preliminary NN model showed that it is feasible to use the NN technique to develop a prediction tool for the IRI thickness and shape parameters and first results from this model reveal that for the mid latitude location used in this study the NN model provides a more accurate prediction than the current IRI model options.