高精度多普勒频高图的获取和分析

电离层高频反射回波的多普勒频移是研究电离层扰动的一个重要参数。在数字测高仪探测中，高分辩率的多普勒频移一般在漂移测量中获得，但这种测量方式探测的频点少，不能获得扰动的高度剖面；而在频高图模式下，虽然工作的频点多，能够获得电子浓度的高度剖面的信息，但探测的多普勒频移的分辩率低，无法用来精确检测电离层扰动。实际的电离层高频回波一般为窄带信号，由此本文中提出了一种新的分析方法，利用DGS-256数字测高仪频高图模式下记录的16个多普勒通道的数据，通过反傅里叶变换还原成时域信号，采用最小二乘法估计相邻时间点的相位差，获得高精度多普勒频高图。作为实例，利用该方法分析武汉电离层观象台数字测高仪观测站的观测数据，得到了多频点的多普勒频移曲线。结果表明：在DGS-256数字测高仪频高图模式下能够得到高精度多普勒频高图，这在电离层扰动探测和研究中很在意义。     

敏捷数字电离层测高仪系统研制及初步观测

在小型天线和低发射功率条件下，保证电离层测高仪观测数据质量和提高观测速度一直是电离层垂测的技术难点.针对这一问题，基于新近发展的高速数字芯片和射频器件，采用窄带跟踪滤波、脉冲压缩、编码复用和天线均衡匹配等技术，设计和研制一种敏捷数字电离层测高仪.该系统采用数米高的小型收发天线和便携式主机系统，配置任意频率扫描方式频高图、高分辨率多普勒频高图和斜向探测等多种工作模式，具有可流动观测布站、系统参数灵活捷变及适合快速电离层扰动探测等能力.敏捷数字电离层测高仪为组网观测获得大范围电离层时空变化和电离层快速扰动及传播提供了一种有效的探测手段.      

电离层多普勒接收机的设计与实验

利用软件无线电技术设计了一种电离层多普勒接收机. 该接收机采用DSP, FPGA等数字芯片与PXI总线进行架构, 使用GPS作为接收机的时间和频率同 步模块, 能够灵活设置系统参数. 实验接收来自中国蒲城陕西天文台的高 频时间信号, 实时获取由于电离层扰动所产生的多普勒频率偏移信息. 使用通过MATLAB语言实现的信号处理软件平台, 对接收到的高频信号进行处理. 观测结果表明, 接收机能够分析电离层回波信号的多普勒频移随时间的变化, 是获取不同空间尺度电离层扰动信息的一种有效手段.      

典型电离层多普勒记录及其讨论

由于地面电离层多普勒频率偏移测量具有时间连续、设备相对简便等固有特征，它特别适合于扰监测。本文在整理北京大学电离层高频多普勒台站观测资料的基础上，给出了一些典型电离层多普勒效应观测现象，这些现象反映了多普勒的细致分析对电离层形态学研究有其特殊意义。利用IRI模型，对多普勒频移的太阳耀斑效应及电离层不规则结构对多普勒频移的影响进行了模拟计算，理论结果与观测基本一致，从而大体上解释了这些响应的物理机制。论文最后对观测到的一种特殊的记录类型－－S型描迹的具体成因作了详细的分析和讨论，指出在一定条件下，以一定相位速度水平传播的声重波可以产生这类记录，给出了相位速度和振幅等声重波参数与记录描迹形状的关系，这对从多普勒频移记录推演电离层中的波动特征有一定的帮助。     

由高频无线电波反射回波参数反演电离层运动和结构的高度剖面

本文从广义电波射线微分方程组出发,导出了时变、不均匀和各向异性电离层介质中高频无线电波反射回波的可测参数与电离层的运动和结构参数之间的积分方程组,并给出了利用现代数字测高仪中的多普勒图、定向图、频高图和测距图,反演电离层的结构和运动随高度的分布剖面的计算方法.根据这种反演方法,单站探测电离层运动和结构剖面时有多种可测参量的组合方式.文中提出了一种最佳的参量组合方案,为探测设备的改进和观测记录的分析提供了理论依据.      

Kalman滤波估算电离层延迟的一种优化方法

频间偏差（Inter Frequency Bias，IFB）通常会给电离层延迟的解算带来误差.目前从电离层延迟中消除频间偏差的方法是基于GPS双频观测数据建立垂直电离层模型，利用卡尔曼滤波实时估算电离层模型系数和频间偏差.然而滤波过程中的测量噪声协方差矩阵没有考虑系统观测量之间的相关性，这会导致滤波模型不准确，进而影响最后求解的电离层延迟的准确性.本文选取了美国19个参考站的GPS双频观测数据，利用卡尔曼滤波实时估算电离层模型系数以及频间偏差.在滤波过程中，通过将先验频间偏差的估计方差引入测量噪声方差，实现对测量噪声协方差矩阵的优化.计算结果表明，优化后得到的卫星频间偏差与欧洲定轨中心（Center for Orbit Determination in Europe，CODE）得到的频间偏差更接近.将优化后的电离层延迟代入伪距解算，得到的位置误差的标准差在东向和天顶向分别下降了12.5%和15.4%，天顶向误差平均值下降了17.6%，定位精度得到提高.      

中纬地区日间类扩展F不规则结构的观测研究

基于高频多普勒观测,研究中纬地区日间类扩展F现象及其与其他电离层扰动现象的关联.结果表明:日间类扩展F具有出现时间覆盖面广、持续时间长、与其他电离层扰动相互伴随等特征;形态特征表现为回波弥散（与夜间扩展F相似）,弥散回波的频移多倾向于正向偏移,有时与行进电离层扰动（TIDs）相互伴随.日间类扩展F现象虽然是偶发事件,且发生率极低,但其出现时间及区域的广泛性充分体现了该现象对空间天气及空间环境的影响具有不可忽视的重要性.      

1984年4月份兰州地区电离层行波扰动的观测结果及初析

１９８４年４月份兰州地区电离层行波扰动的观测结果及初析张秀菊（中国电波传播研究所,新乡,４５３００３）关键词高频返回探测,多普勒频率,电离层行波扰动１９８４年４月我们利用高频返回探测系统在新乡一西北（反射点在兰州地区）电路上多次测到电离Ｆ层的行波扰动...     

台风激发的声重力波的可探测性研究

通过对北京大学高频多普勒台站(39.4°N,116.2°E)多年的观测资料及相关台风资料的统计分析,着重研究了高频多普勒探测手段对由台风引起的扰动电离层响应的可探测性问题.通过对台风登陆前后的高频多普勒观测记录的细致分析及与宁静条件下记录的对比研究,表明高频多普勒观测手段可以很好地探测由台风激发的声重力波,尤其是对台风登陆前后所激发的扰动具有较高的可探测性.在所分析的24次台风事件中有明显扰动记录的高达22次(22/24).结合观测事实与Huang等的统计结果(2/12)进行了比较,并进行了可能的原因分析.通过数值模拟的方法对观测到的主要扰动的非线性传播过程进行了模拟再现,结果基本上与观测结果及线性传播理论一致.确认了一般情况下高可探测性这一事实,但同时也表明可探测性和台风激发源与探测位置及中尺度TIDs在电离层中的传播模式有密切关系.      

多路径效应对GPS多普勒测速的影响

针对全球定位系统（GPS）多普勒观测值在城市环境中受多路径效应影响，从而导致测速误差大的问题，从多普勒频移产生的原理入手，通过运动学理论分析，构建了接收机、反射点与卫星整体运动与多普勒频移误差关系模型。模型分析结果表明:多普勒频移误差与卫星观测向量、反射点切线法向量、接收机运动速度及反射点运动速度有关。最后通过5种不同场景的GPS数据验证了所提模型的正确性。在多路径情况下，当接收机或反射点运动时，可能会导致巨大的测速误差，使得结果不具备可靠性。      

Studying characteristics of traveling ionospheric disturbances using U-shaped traces on vertical incidence ionograms

This paper presents a case study when due to the descending additional U-shaped trace on vertical incidence ionograms, increased critical frequency stabilizes. This corresponds to an ionospheric disturbance that moves toward the ionosonde and then stays overhead.Within a 2D model, traveling ionospheric disturbances (TIDs) are superimposed on the inverted background ionosphere. So ray tracing is used to obtain propagation paths through non-stratified ionosphere thus synthesizing the disturbed ionogram traces. Investigated are changes in the cusp shape caused by varying TID parameters. A cusp-fitting method to determine the TID amplitude, spatial scale, and horizontal drift velocity are shown.     

Histogram-based ionogram displays and their application to autoscaling

A simple method is described for displaying and auto scaling the basic ionogram parameters foF2 and h’F2 as well as some additional layer parameters from digital ionograms. The technique employed is based on forming frequency and height histograms in each ionogram. This technique has now been applied specifically to ionograms produced by the IPS5D ionosonde developed and operated by the Australian Space Weather Service (SWS). The SWS ionograms are archived in a cleaned format and readily available from the SWS internet site. However, the method is applicable to any ionosonde which produces ionograms in a digital format at a useful signal-to-noise level. The most novel feature of the technique for autoscaling is its simplicity and the avoidance of the mathematical imaging and line fitting techniques often used. The program arose from the necessity to display many days of ionogram output to allow the location of specific types of ionospheric event such as ionospheric storms, travelling ionospheric disturbances and repetitive ionospheric height changes for further investigation and measurement. Examples and applications of the method are given including the removal of sporadic E and spread F.     

Ionospheric wave processes during HF heating experiments

Effects of ionospheric modification produced by powerful high frequency radio waves are studied using the method of field-aligned scattering of diagnostic HF radio signals. Observations of scattered HF signals have been made by the Doppler spectrum method. Analysis of the experimental data shows the appearance of quasiperiodic variations in Doppler frequency shift f_d, with periods 30–60 s during the heating cycles. Powerful HF waves are assumed to excite the Alfvén resonator generating oscillations of the magnetic field lines in the heated region and giving rise to f_d artificial variations and magnetic pulsations. In the case of continuous action of the powerful HF transmitter ionospheric waves are sometimes observed with periods 12–25 min, typical of medium-scale travelling ionospheric disturbances.     

Physical and model interpretation of HF radio propagation on the St. Petersburg–Longyearbyen (Svalbard) path

HF radio wave observations have been carried out with an oblique ionospheric sounding (OIS) method on the radio path from St. Petersburg to Longyearbyen (Svalbard), and experimental ionograms were obtained for December 2001. These ionograms have been analysed to investigate the impact of the main ionospheric trough (MIT) and magnetic disturbances on the signals on this path. The observations during weakly disturbed (K_р = 2) magnetic conditions on 14–15 December 2001 were compared with predictions from ray-tracing through a numerical model of the ionosphere. The ray-tracing computer program synthesizes the OIS ionograms by means of the “shooting method”. This method calculates trajectories of HF radio waves for different values of elevation angle and transmission frequency. There was a variety of calculated trajectories, from which we choose those which reach the receiver, and the selected paths provide a synthesis of the oblique ionograms. To simulate HF radio wave propagation, we apply a three-dimensional distribution of the electron density calculated with the mathematical model of the high-latitude ionosphere developed in the Polar Geophysical Institute (PGI). These numerical simulations permit us to interpret specific peculiarities of the OIS data such as abnormal propagation modes, increased delays of signals, enhanced MOF (maximum observed frequency) values etc. New results of the study are summarised as follows. (1) An unusual feature of the propagation along the path is the change of propagation mechanism during substorms on entering a path midpoint (or 1-hop reflection point) to the MIT. (2) Even weak substorms, having the distinguished intensities, lead to the appearance of different types of irregularities observed by the CUTLASS radar and therefore to the different propagation modes and F2MOF values. (3) The PGI model of the ionosphere was first used for ray-tracing at high latitudes. The model results are basically in a good qualitative agreement with experimental observations. This model provides the satisfactory agreement between the calculated and experimental F2MOF values while not correctly representing the fine structure of the experimental OIS ionograms at night. An agreement between the calculated and experimental data is better for day and evening hours than at night.     

A method for automatic detection of equatorial spread-F in ionograms

A method is presented for automatic detection of spread-F. The method is based on an image recognition technique and is applied to ionograms recorded at the ionospheric station of Tucumán (26.9°S, 294.6°E). The performance achieved is statistically evaluated and demonstrated with significant examples. The proposed method improves Autoscala's ability to reject ionograms with insufficient information, including those featuring Spread-F. Automatic identification of cases of spread-F is of additional interest in Space Weather applications, when it helps detect degraded radio propagation conditions.The present data analysis is a retrospective study but forms the basis for real-time application as an extension of Autoscala’s capabilities.     

Use of global ionospheric maps for HF Doppler measurements interpretation

The HF Doppler technique, a method of measurement of Doppler frequency shift of ionospheric signal, is one of the well-known and widely used techniques of ionosphere research. It allows investigation of various disturbances in the ionosphere. There are different sources of disturbances in the ionosphere such as geomagnetic storms, solar flashes, meteorological effects and atmospheric waves. The HF Doppler technique allows us to find out the influence of earthquakes, explosions and other processes on the ionosphere, which occurs near the Earth. HF Doppler technique has high sensitivity to small frequency variations and high time resolution but interpretation of results is difficult. In this paper, we attempt to use GPS data for Doppler measurements interpretation. Modeling of Doppler frequency shift variations with use of TEC allows separation of ionosphere disturbances of medium scale.     

Numerical study of traveling ionosphere disturbances with vertical incidence data

High frequency ionosphere vertical sounding, as an important and representative application for detecting the ionosphere and studying the characteristics of radio propagation, can be utilized to monitor the ionosphere continuously variation and to acquire the ionosphere asymmetrical features of diverse scale above the ionosphere vertical sounding stations. This is a first article on real time application of numerical methods to obtain the parameters of traveling ionosphere disturbances (TIDs) using vertical incident ionograms. In this paper, the distribution of ionosphere electron density with TIDs is constructed using a background ionosphere model superimposed a perturbation theory model. The background ionosphere electron density is modelled by the inversion of vertical incident ionograms which are observed before the appearance of the disturbance. Based on the fourth order Adams-Bashforth-Moulton (the so-called ABM) predictor corrector method, instead of Runge-Kutta method, the fast digital ray tracing method is established. According to process of the disturbed trace simulation and parameters inversion, the characteristic parameters of ionosphere disturbance at different detection time can be obtained in real time. The numerical analysis of TIDs is then captured completely.     

高频返回信道的频率散布测量

本文介绍了用高频后向散射探测系统测量高频返回信道的频率散布的实验, 对高频返回信道的多普勒频移和多普勒频谱宽度的日变化进行讨论.文中比较了地物回波谱和应答回波谱证实了陆地对高频后向散射信道的多普勒频移贡献甚小, 而对谱宽度和谱的形状有影响.      

我国中部地区电离层扰动时空尺度的统计分析

将最大熵动态互普方法用于高频多普勒台阵数据处理，从覆盖太阳活动高、低年份的高频多普勒台阵观测数据中，得出了中国中部地区电离层声重波扰动的传播方向、时空尺度等参量之间的统计分布特性，进而探讨了有关扰动源的情况，结果表明，极区源和局地源两种不同的激发源所激发的声波，分别反映了电离层扰动的全球传播和地区特性两种不同的特征。