共查询到20条相似文献,搜索用时 78 毫秒
1.
机翼结构重量预测的多学科分析优化方法 总被引:1,自引:1,他引:0
为了克服现有机翼结构重量计算方法的局限性,提出一种基于多学科分析优化的机翼结构重量计算方法。以客机机翼为例,阐述整个计算流程。计算流程的关键步骤包括机翼外形和结构参数化建模、气动分析模型自动生成与外形优化、结构有限元模型的自动生成和结构优化。应用CAD软件CATIA的二次开发方法,实现机翼外形几何模型、结构布置几何模型和气动分析模型的自动生成;应用MSC.Patran的PCL编程技术,实现结构有限元模型的自动生成;应用等效刚度和等效强度方法,提高结构有限元模型自动生成的稳健性,缩短结构分析和优化的计算时间;应用多学科集成和优化技术,建立机翼结构重量预测的计算平台,实现整个计算过程的自动化。算例表明这种方法稳健、有效,可快速地分析机翼外形参数与结构重量之间的关系,分析不同展向载荷分布和不同选材方案对机翼结构重量的影响。 相似文献
2.
对于机翼参数化建模方法,利用Visual Basic进行CATIA二次开发,实现机翼的外形参数化建模。本文着重对基于CST的翼型参数化建模方法进行了研究,在生成的界面中输入相应设计参数:根弦长、翼展、前缘后掠角、后缘后掠角、翼型数据文件和翼型参数,如控制点处翼型上下表面相对厚度等。通过运行编写的Visual Basic的程序,自动在CATIA中生成机翼外形模型,从而实现了机翼模型的快速自动生成和修改,为CFD软件进行机翼气动分析和对机翼与翼型进行气动外形优化提供模型。 相似文献
3.
4.
机翼气动外形优化设计方法综述 总被引:1,自引:0,他引:1
机翼的数值优化过程包括定义机翼的初始气动外形,计算气动特性(建模、分析)和数值优化两大部分,这里归纳并分析了几种常用的优化方法,围绕机翼的建模分析和数值优化,对机翼优化设计方法应用现状和发展趋势进行了阐述。 相似文献
5.
分析了机翼设计优化的一般策略,针对高空长航时飞行器的气动性能需求和机翼构型特点,提出以机翼剖面翼型沿展向分布的设计优化;针对Hicks-Henne翼型参数化方法后缘不光顺的缺陷,提出了改进Hicks-Henne翼型参数化方法;针对通常基于线性插值的三维动网格生成方式的缺陷,提出采用基于B样条函数的三维动网格生成;通过对商业软件Pointwise和Fluent的二次开发实现数据流和工作流的定制及自动化,并将所有流程在iSIGHT平台下集成;优化算例表明,基于动网格的机翼优化实现提高功率因子的目标,是高空长航时机翼优化中的一种有效方法。 相似文献
6.
7.
宋倩 《民用飞机设计与研究》2018,(4):6
针对目前在飞翼客机机翼优化过程中对气动弹性效应考虑不充分、气动/结构耦合不充分的问题,分别对飞翼客机机翼的CFD(Computational Fluid Dynamics,简称CFD)气动模型、平板气动模型和三维板杆模型进行参数化建模,开展了针对飞翼布局客机机翼的气动/结构综合优化设计的研究,搭建了一套基于Kriging模型的前瞻性设计方法,获得了机翼最优的气动外形和结构构型,在有效降低机翼结构重量的同时,显著地减少了气动阻力。在满足精度及效率的前提下,气动子学科选用亚声速偶极子格网法以及基于Euler方程的CFD方法,结构子学科选用有限元分析方法,优化算法采用遗传算法。 相似文献
8.
跨声速飞机高可信度多设计点多约束气动优化设计技术研究 总被引:1,自引:0,他引:1
本文目的是研究和开发工程实用的高可信度数值优化设计技术,并应用于先进跨声速飞机机翼的三维气动外形优化设计。本文综合应用了自由几何变形(FFD)几何外形参数化方法、弹簧比拟非结构网格变形方法、基于RANS方程的高可信度计算流体力学(CFD)分析方法、径向基函数(RBF)代理模型方法、粒子群寻优(PSO)方法等技术,分别对NASA CRM模型、航空工业设计的W2机翼模型展开了单设计点和多设计点的三维气动外形优化设计。通过对单设计点优化设计后的CRM翼身组合体、双设计点优化设计后的W2机翼模型气动外形进行详细的气动分析,发现优化后的CRM翼身组合体、W2机翼模型相对初始外形气动性能得到显著改进,证实了数值优化设计技术应用于先进跨声速飞机机翼三维气动外形设计的有效性。同时证实了开发的数值优化设计技术和工具的正确性和实用性。 相似文献
9.
10.
实际气动设计中遇到的工程问题较为复杂,然而能够用于实际工程设计的高可信度气动外形优化设计工具较少.基于飞行器设计工程实际中的各种复杂气动约束和几何约束要求,集成高可信度非结构网格RANS方程求解器、弹簧比拟网格变形技术、FFD外形参数化、RBF代理模型、粒子群优化器,构建多设计点气动外形优化设计工具,并应用于先进低速层流翼型和高亚声速超临界机翼的气动外形优化设计中(包括单设计点和多设计点),进行考虑/不考虑气动约束和几何约束的气动外形优化设计分析.结果表明:多设计点气动外形优化设计工具有效,约束条件和智能优化器自动有效地引导了层流翼型和亚声速机翼外形的有利改变. 相似文献
11.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
12.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
13.
14.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
15.
16.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
17.
Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis 总被引:2,自引:0,他引:2
GAO Hong-liang ZHANG Hui WANG Shu-juan 《中国航空学报》2007,20(1):75-80
Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved. 相似文献
18.
19.
Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters 总被引:1,自引:0,他引:1
ZHOU Hong-guo WEI Xiu-ying MAO Chang-hui XIONG Yu-hua QIN Guang-rong 《中国航空学报》2007,20(2):172-176
The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃). 相似文献
20.
YANG Fen ZHANG Xue-jun TIAN Fang WU Xu GAN Fu-xing 《中国航空学报》2007,20(2):181-186
Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration. 相似文献