BLDCM位置伺服系统的模糊滑模控制

针对BLDCM位置伺服系统,设计了一种模糊滑模变结构控制器。滑模变结构控制具有响应速度快、控制精度高、鲁棒性强的特点,但普遍存在抖振现象。把模糊控制引入到常规滑模变结构控制中,采用模糊推理来调节开关控制的幅度,能有效的削弱滑模切换时产生的剧烈抖振,而不牺牲滑模变结构控制对系统参数摄动和外界扰动的强鲁棒性。仿真结果表明该方案在BLDCM位置伺服系统中提高了控制系统的精度和鲁棒性,使得控制性能得到了极大的改善。     

Attitude stabilization with actuators subject to switching restrictions: an approach via exact relay control methods

On-off thrusters are frequently used as actuators for attitude control. Typically these thrusters are subject to switching constraints. A limit cycle is the normal steady state operation mode of such attitude control systems. This contribution deals with controller design for precision attitude stabilization using actuators whose switching restrictions are explicitly considered. An exact approach is presented using ideas from established relay control methods. The design procedure is illustrated with an attitude controller design to attain a limit cycle with prescribed characteristics     

涡扇发动机极值限制保护闭环控制设计

现代高性能涡扇发动机采用分段组合多变量控制计划,以发挥发动机工作在整个飞行包线范围内的气动热力设计潜力。为保证发动机在过渡态工作的安全性,控制系统中必须考虑极值限制保护控制的设计问题。为避免直接限制保护控制引发的不同控制通道切换带来的系统震荡问题,提出1种高回路稳态增益的滞后-超前频域校正间接极值限制保护控制器设计方法,在保证限制回路足够的稳态精度和抗噪声能力的同时,又避免了引入积分环节导致相角裕度损失过大的缺点。通过发动机线性模型和非线性模型的控制系统仿真,验证了所述方法设计限制控制器的有效性。     

Control of nearly singular decoupling systems and nonlinearaircraft maneuver

The author treats the question of control of a class of nonlinear systems using state variable feedback whose input/output map is nearly singular. Although the existing decoupling theory is applicable to such systems, this requires a large amount of control, which may not be permissible. A decoupling approach using state variable feedback in an approximate sense, but requiring a small control magnitude is considered. A decoupling scheme is presented that gives rise to a singularly perturbed system describing the fast dynamics of the control vector. The quasi-steady-state solution of the system gives a control law that decouples the system in an approximate way. The controller includes a servocompensator and a reference trajectory generator. Based on this result, a control law for approximate decoupling of roll angle, angle of attack, and sideslip in rapid, nonlinear airplane maneuvers is derived. Simulated responses of the closed-loop system show that large, simultaneous lateral and longitudinal maneuvers can be accurately performed in spite of uncertainty in stability derivatives     

PMAC-based Tracking Control System for 8-axis Automated Tape-laying Machine

This article introduces a computer numerical control (CNC)-based open hardware architecture system to realize the special functions of automated tape-laying (ATL) in a numerical control system. It associates a programmable multi-axis controller (PMAC) as the motion control unit with programmable numerical controllers (PCL-725, PCL-730) for on-off control. To bring about synchronized movements of the main 5-axis tape-laying head system and the 3-axis ultrasonic tape-cutting sub-system, the tracking-control method associated with time-based mode attributed to PMAC is applied in different cases. In addition, with the goal of realizing real-time tasks in the software system such as synchronizing motion control and on-off control, the real-time Win 2000 system is adopted. As a device driver for PMAC and PCL, a user graphical interface and a numerical control program interpretation module are also designed. This system is helpful to solve complicated problems in designing numerical controls for ATL such as ensuring high requirements for precise machine control and synchronization of motion control and on-off control.     

Decoupled ultimate boundedness control of systems and largeaircraft maneuver

The robust trajectory control of a class of nonlinear systems which can be decoupled by state-variable feedback is considered. It is assumed that the system matrices are unknown but bounded. A nonlinear control law is derived so that the tracking error in the closed-loop system is uniformly bounded and tends to a certain small neighborhood of the origin. The error dynamics are asymptotically decoupled in an approximate sense. The controller includes a reference trajectory generator and uses the integral feedback of the tracking error. On the basis of this result, a flight control system is designed for the control of roll angle, angle of attack, and sideslip in rapid, nonlinear maneuvers of aircraft. Simulation results are presented to show that large, simultaneous lateral and longitudinal maneuvers can be performed in spite of the uncertainty in the stability derivatives     

全角模式半球谐振陀螺振型控制与角度检测

传统半球谐振陀螺采用力平衡工作模式，这种模式仅能直接检测实时转速，且动态范围较小，限制了半球谐振陀螺在具有大动态机动特点的应用场景中的使用。相比之下，全角模式半球谐振陀螺通过滞后角与陀螺转动角度之间的比例关系进行角度检测，相比力平衡模式，具有直接角度检测的功能和更大的动态范围。对全角模式半球谐振陀螺进行了研究，介绍了全角模式半球谐振陀螺的控制与信号处理的方法，以及全角模式半球谐振陀螺系统的实现。该系统通过基于相干解调的信号处理算法，实现了谐振振幅参数的解算，通过PI控制器、正交分解及乘法调制实现了跟踪谐振振型进动控制作用，通过谐振振型进动角度解算器直接解算了陀螺的转动角度。通过数字仿真与实物实验结果可知，所介绍的全角模式半球谐振陀螺系统能够实现不依赖于积分运算的角度检测功能，且较之于力平衡模式，其半球谐振陀螺动态范围有了一定程度的提高。     

N5B燃油系统试验转台计算机控制系统设计

对N5B燃油系统试验台的台架转动角度控制系统建立进行设计分析,介绍了试验台架的结构方式与运转驱动形式、控制系统组成、计算机控制算法设计,以及在实际应用中,为改善控制品质所采用硬件的改进方法。     

Adaptive sliding mode control for limit protection of aircraft engines

In practice, some sensors of aircraft engines naturally fail to obtain an acceptable measurement for control propose, which will severely degrade the system performance and even deactivate the limit protection function. This paper proposes an adaptive strategy for the limit protection task under unreliable measurement. With the help of a nominal system, an online estimator with gradient adaption law and low-pass filter is devised to evaluate output uncertainty. Based on the estimation result, a sliding mode controller is designed by defining a sliding surface and deriving a control law. Using Lyapunov theorem, the stability of the online estimator and the closed-loop system is detailedly proven. Simulations based on a reliable turbofan model are presented, which verify the stability and effectiveness of the proposed method. Simulation results show that the online estimator can operate against the measurement noise, and the sliding controller can keep relevant outputs within their limits despite slow-response sensors.     

空间绳系组合体的继电型控制离轨策略

为了使空间绳系组合体更好地完成空间碎片清理任务,提出一种更接近工程实际应用的继电型推力（Bang-Bang）离轨控制策略。利用带有差动间隙的Bang-Bang控制策略,实现绳系组合体切向的继电式推力加速;设计了一种全新的被动式卷扬机构,以避免在使用继电式推力离轨的过程中多次开关发动机对绳系组合体带来的负面影响;针对径向推力设计了输入受限的滑模控制器,且最终控制指令同样以继电式推力形式实现,抑制了离轨过程中绳系组合体的面内摆动。数值仿真结果显示,继电型推力能够实现与连续推力近似的效果,能够将绳系组合体的摆动角度抑制在一个较小的范围内;整个离轨控制策略能够使得空间绳系组合体在保持姿态稳定的前提下将空间碎片拖曳到坟墓轨道。     

基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模控制

针对涡扇发动机内部状态大范围变化条件下,单点线性控制器控制效果不佳而线性变参数控制器求解困难的问题,提出了一种基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模变结构控制。首先,采用多入多出平衡流形展开模型辨识技术,获得仿射型的涡扇发动机数学模型。随后,利用反馈线性化将平衡流形展开模型解耦,经过坐标变换获得可用于控制系统设计的线性结果,考虑了具有误差项和饱和函数的指数趋近滑模控制律来提高控制系统的鲁棒性,完成了基于平衡流形展开模型的多变量涡扇发动机反馈线性化滑模控制器设计。最后,在非线性部件级模型上开展了控制器验证。在平衡流形展开模型设计工况,增益控制和滑模控制的控制效果表明,基于平衡流形展开模型的反馈线性化方法能够获得涡扇发动机良好的控制效果。同时,在平衡流形展开模型稳定但精度无法保证的非设计飞行工况,反馈线性化滑模控制器能够进一步抑制不确定性的影响,保证转子转速和发动机压比的跟踪控制效果。     

Control and stabilization of nonlinear uncertain elastic roboticarm

An approach is presented to the control of an uncertain nonlinear flexible robot arm (PUMA-type) with three rotational joints. The third link is assumed to be elastic. A torquer control law, which is a function of the trajectory error, is derived for controlling the joint angles. The knowledge of the system dynamics is not required for the derivation of the controller. This controller includes a reference model to generate command joint angle trajectories, and a dynamic system in the feedback path which requires only joint angle and rate for feedback. The torquer controller asymptotically decouples the elastic dynamics into two subsystems, representing the transverse vibration of the elastic link in two orthogonal planes. For the damping of the elastic vibration, a force control law using modal velocity feedback is synthesized. Simulation results are presented to show that the combination of the torque and force control law accomplishes reference joint angle trajectory tracking and elastic mode stabilization despite the uncertainty in the system     

基于模仿强化学习的固定翼飞机姿态控制器

研究了基于模仿强化学习的飞机姿态控制器。首先,建立专家经验数据集,并利用行为克隆对控制网络参数初始化;而后,控制网络利用强化学习和监督学习混合模式训练,通过奖励函数塑形和经验数据集监督学习引导强化学习算法快速收敛,使姿态控制器姿态响应优化的同时符合专家经验。控制网络输入为飞机姿态角误差、角速度等状态变量,输出控制增稳系统指令。实验表明,模仿强化学习控制器能够实现不同初始条件下飞机姿态角快速响应并与经验数据相符。     

Finite-time sliding mode attitude control for a reentry vehicle with blended aerodynamic surfaces and a reaction control system

This paper proposes a finite-time robust flight controller, targeting for a reentry vehicle with blended aerodynamic surfaces and a reaction control system(RCS). Firstly, a novel finite-time attitude controller is pointed out with the introduction of a nonsingular finite-time sliding mode manifold. The attitude tracking errors are mathematically proved to converge to zero within finite time which can be estimated. In order to improve the performance, a second-order finite-time sliding mode controller is further developed to effectively alleviate chattering without any deterioration of robustness and accuracy. Moreover, an optimization control allocation algorithm, using linear programming and a pulse-width pulse-frequency(PWPF) modulator, is designed to allocate torque commands for all the aerodynamic surface deflections and on–off switching-states of RCS thrusters.Simulations are provided for the reentry vehicle considering uncertain parameters and external disturbances for practical purposes, and the results demonstrate the effectiveness and robustness of the attitude control system.     

推力矢量飞机控制系统设计与仿真研究

针对某型推力矢量飞机提出了一套控制方案,较好地将理论与工程实践结合起来,解决了飞机在全包线范围内的飞行控制问题。该控制方案包括常规机动控制器、大迎角超机动控制器、控制分配器及轨迹跟踪控制器等几个主要环节的设计,完成的控制系统满足全包线飞行品质的要求,可实现对大机动轨迹的精确跟踪。最后,对此综合控制系统进行数字仿真并给出部分仿真结果,结果表明所提出的飞行控制系统设计方案是成功的。     

超级电容储能系统的状态识别与动态控制设计

根据变频器母线电流在电机运行于加载和制动时的不同特征,通过采集变频器母线电流实时监测电机运行状态,设计了双向DC/DC变换器模式切换与控制器通断控制电路,实时识别电机运行状态,实现对储能单元在线动态控制。通过搭建550 W的储能系统试验平台,验证了所设计状态识别与控制电路的合理性。     

Sliding mode control of the space nuclear reactor system

The automatic control system (ACS) of the space nuclear reactor power system TOPAZ II that generates electricity from nuclear heat using in-core thermionic converters is considered. Sliding mode control technique is applied to the reactor system controller design in order to improve robustness and accuracy of tracking of a thermal power reference profile in a start-up regime and a payload current reference profile in an operation regime. Extensive simulations of the TOPAZ II reactor system with the designed sliding mode controller showed an improvement of the reactor system performance     

高超声速飞行器自适应反步控制器设计

针对含有不确定干扰项的吸气式高超声速飞行器模型,分别设计了基于反馈线性化的速度控制器和基于反步法的航迹控制器,以实现对速度和航迹角参考信号的稳定跟踪。通过指令滤波器得到俯仰角的实际跟踪指令及其一阶、二阶微分信号,可直接设计升降舵控制指令,在解决了虚拟控制量求导"复杂性爆炸"问题的同时,减少了反推计算步数,从而达到提高系统动态性能和优化控制器结构的目的。基于LaSalle不变集原理和Lyapunov理论设计的自适应更新律保证了系统的稳定性。仿真结果表明,所设计的控制器在飞行器存在不确定干扰的情况下仍能满足对参考信号跟踪性能的要求。     

基于自适应神经模糊推理算法的无人机电推进燃料电池供气系统性能优化

本文针对某无人机基于聚合物交换膜燃料电池和锂离子电池的混合动力电推进系统的应用,研究开发了一种基于自适应神经模糊推理系统的电源管理系统控制技术,以控制混合动力电力推进系统,同时优化燃料电池供气系统的性能。本文以所建立的某无人机混合电推进系统数学模型为研究对象,研究了燃料电池电流与燃料电池供气系统压缩机功率之间的关系,建立了燃料电池电流与最佳压缩机功率关系的参考模型。在参考模型的基础上,引入自适应控制器来优化燃料电池供气系统的性能。基于自适应神经模糊推理系统的控制器将压缩机的实际运行功率动态调整到参考模型中定义的最佳值。自适应控制器的在线学习和训练能力用来辨识燃料电池电流的非线性变化,并产生压缩机电机电压的控制信号,以优化燃料电池供气系统的性能。在Matlab 仿真环境中开发了质子交换膜燃料电池和锂离子混合动力电推进系统模型并对所设计的控制器进行了仿真分析,结果表明基于自适应神经模糊推理系统的控制器为燃料电池供气系统压缩机性能优化提供了一种新颖而全面的途径,使燃料电池供气系统获得最大净功率输出。将燃料电池系统的净功率输出与最佳压缩机功率和恒定压缩机功率进行了比较,结果表明优化的压缩机功率配置比恒定的压缩机功率配置节能2.62%。同时,燃料电池自适应神经模糊推理系统控制器优化了燃料电池供气系统的能量利用。     

基于滑模控制的航空发动机多变量约束管理

针对航空发动机传统单变量线性控制器min-max切换方法处理约束的不足,提出了单变量滑模控制器替换所有线性控制器的改进策略,并将该方法拓展为新切换逻辑下的多变量滑模控制结构。基于改进的单变量滑模控制器min-max结构,多变量控制策略中加入了多变量滑模主控制器和新的切换逻辑,充分利用发动机的所有控制量,克服了传统方法的保守性,进一步提高发动机约束下的动态性能。对稳态时工作的控制器进行了理论分析,建立了多变量控制器实现精确跟踪的充要条件。仿真结果表明,多变量控制方法在更苛刻的约束条件下能够实现跟踪任务,而且提高了推力跟踪的快速性,调节时间从1.91 s缩短到1.54 s,同时降低了稳态时的油耗。