基于我国深空站三向测量模式的数据精度分析

为了验证我国深空站三向测量模式的正确性,以同步星跟踪试验中的测量数据为基础,建立了站间同步修正算法和三向测量观测模型,通过与同步卫星的精密星历反算测量值比较,得到了测量数据的标定参数,结果表明,我国深空站测控能够实现dm级的测量精度,明显优于“嫦娥二号”测量的水平;同时利用测量数据进行定轨策略分析,最终实现了10 m量级的同步卫星定轨精度.分析结果为“嫦娥三号”探测器实施有效测控提供了依据.     

Galileo卫星星钟故障前后信号质量分析

星载原子钟是卫星导航系统的核心器件,是影响导航信号质量的重要因素。2016年11月,Galileo系统利用一箭四星发射升空4颗新一代Galileo卫星。根据观测显示,截至2017年7月,仅能接收到其中1颗卫星发射的导航信号。在2017年1月,欧洲航天局通告称多颗卫星原子钟大规模故障。针对此,40m 大口径高增益天线系统设备对不同批次和星钟故障情况的3颗Galileo卫星E5频点信号进行了数据采集处理,对各信号分量的功率谱、星座图、码片波形、相关损失、相关峰、S曲线偏差等信号质量指标进行了分析评估。结果表明,此次星载原子钟的大面积故障并未影响Galileo卫星信号的可用性,足够的星载备份钟避免了信号质量的严重恶化。     

Characterization of NAVSTAR GPS and GLONASS on-board clocks

Investigation into navigation satellite on board clock frequency references and performance are reported. The focus is on the stability of the clocks aboard the NAVSTAR GPS (Global Positioning System) and GLONASS satellites as well as those used by their respective maser control stations and associated time scales. Allan-variance techniques have been applied to determine the long-term time-domain behavior of satellite clocks in an attempt to identify different regions of power spectral density. Coupled with analysis of relative-frequency drift over a period of many weeks, this behavior allows the type of satellite onboard standard to be tentatively identified. The known nature of the GPS clocks has shown that the different types of clocks aboard the satellites (crystal, rubidium, and cesium) are distinguishable given a sufficient sample time. The same approach has been applied to the GLONASS satellites, and a comparison of the results obtained from GPS has allowed conjecture on the type of clock used by the GLONASS satellites. It appears that GLONASS has used clocks of the quality of rubidium atomic oscillators since at least 1986, and that the quality and performance of onboard standards have increased steadily with time. Some current satellites perform well enough in terms of frequency drift, flicker FM noise floor, and long-term stability to compare favorably with the cesium beam standards carried on NAVSTAR GPS satellites launched in 1983-84     

Ground Compatibility Tests for Gravity Measurement of SELENE: Accuracies of Two- and Four-Way Doppler and Range Measurements

The Japanese lunar mission Selenological and Engineering Explorer (SELENE) was launched in September 2007 and continued its mission until June 2009, when the main orbiter impacted with the surface of the Moon. SELENE consisted of three satellites: Main, Rstar, and Vstar. Rstar’s tasks were to forward up-link signals from the Usuada Deep Space Center (UDSC) to Main, and to down-link returning signals from Main to UDSC. We refer to this tracking sub-system as a four-way Doppler measurement. In contrast, conventional tracking systems between Rstar and UDSC as well as between Main and ground stations are referred to as two-way Doppler and range measurements. Using Main and Rstar, we successfully observed the gravity field over the farside of the Moon. Because four-way Doppler measurements via a relay sub-satellite were a fundamental experiment in space for Japanese space agencies, compatibility of radiometric instruments onboard Main and Rstar to UDSC were carefully examined at the UDSC using components manufactured for flight models. These tests not only proved the feasibility of the four-way Doppler measurements but also provided biases and variations of the four-way Doppler and two-way Doppler and range measurements that were later taken into account during the processing of tracking data and the analysis of the lunar global gravity field.     

导航星座的自主导航技术--卫星自主时间同步

基于星载原子时钟频率稳定性的Allan方差表达,建立系统状态方程,并以星间双向测量伪距差作为基本观测量,组成系统测量方程,从而可以设计适用于导航星座卫星时间同步的Kalman滤波算法。系统仿真结果表明：通过对星间双向测量数据的滤波处理,能够实现星座卫星时间精密同步。     

Inter-satellite link augmented BeiDou-3 orbit determination for precise point positioning

Precise Point Positioning(PPP) requires precise products, including high-accuracy satellite orbit and clock parameters. It is impossible to obtain an orbit solution that is sufficiently accurate for PPP services with a regional tracking network; therefore, satellite orbits are usually estimated by a global tracking network with a large number of ground stations. However, it is expensive to build globally distributed stations. Fortunately, BeiDou-3 satellites carry an InterSatellite Link(ISL) pay...     

Orbit Determination from Passive Range Observations

An experiment is described by which the ephemeris of a near-synchronous satellite was determined from passive range observations. The data consist of the measured times of reception at ground tracking stations of electromagnetic signals which are radiated from the satellite at regular intervals. A comparison of the ephemeris to one obtained from Doppler tracking indicates an accuracy of better than 4.9 mrad rms.     

A satellite interference location system using differential timeand phase measurement techniques

The design and development of a system for inferring the position of terrestrial satellite uplink stations using existing domestic satellites with minimal disruption to normal satellite operation are described. Two methods are presented by which a quantity measured at a terrestrial receiving site is mapped into a curve of possible uplink locations on the Earth's surface. One method involves measuring differential time delays of a single uplink signal observed through two adjacent spacecraft. The other uses a short baseline interferometer composed of the two cross-polarized and spatially separated antenna feeds aboard an affected satellite. A unique location is obtained by using an appropriate combination of the two methods. A system for measurement of the required differential delays and phases and experimental work performed to demonstrate the feasibility of the location methods are described     

Space-system timekeeping in the presence of solar flares

It has become increasingly clear that the enhanced space radiation environment associated with solar activity can play havoc with satellite systems. An important special case of this problem concerns precise timekeeping among orbiting communications satellites, where the loss of synchronization can mean the loss of communications. Here, we discuss one satellite system's solution to this problem, where radiation-sensitive spacecraft crystal oscillators are "slaved" to radiation-insensitive spacecraft atomic clocks.     

A geopause satellite system concept

The forthcoming 10 cm range tracking accuracy capability holds much promise in connection with a number of Earth and ocean dynamics investigations. These include a set of earthquake-related studies of fault motions and the Earth's tidal, polar and rotational motions, as well as studies of the gravity field and the sea surface topography which should furnish basic information about mass and heat flow in the oceans. The state of the orbit analysis art is presently at about the 10 m level, or about two orders of magnitude away from the 10 cm range accuracy capability expected in the next couple of years or so. The realization of a 10 cm orbit analysis capability awaits the solution of four kinds of problems, namely, those involving orbit determination and the lack of sufficient knowledge of tracking system biases, the gravity field, and tracking station locations. The Geopause satellite system concept offers promising approaches in connection with all of these areas. A typical Geopause satellite orbit has a 14 hour period, a mean height of about 4.6 Earth radii, and is nearly circular, polar, and normal to the ecliptic. At this height only a relatively few gravity terms have uncertainties corresponding to orbital perturbations above the decimeter level. The orbit s, in this sense, at the geopotential boundary, i.e., the geopause. The few remaining environmental quantities which may be significant can be determined by means of orbit analyses and accelerometers. The Geopause satellite system also provides the tracking geometery and coverage needed for determining the orbit, the tracking system biases and the station locations. Studies indicate that the Geopause satellite, tracked with a 2 cm ranging system from nine NASA affiliated sites, can yield decimeter station location accuracies. Five or more fundamental stations well distributed in longitude can view Geopause over the North Pole. This means not only that redundant data are available for determining tracking system biases, but also that both components of the polar motion can be observed frequently. When tracking Geopause, the NASA sites become a two-hemisphere configuration which is ideal for a number of Earth physics applications such as the observation of the polar motion with a time resolution of a fraction of a day. Geopause also provides the basic capability for satellite-to-satellite tracking of drag-free satellites for mapping the gravity field and altimeter satellites for surveying the sea surface topography. Geopause tracking a coplanar, drag-free satellite for two months to 0.03 mm per second accuracy can yield the geoid over the entire Earth to decimeter accuracy with 2.5° spatial resolution. Two Geopause satellites tracking a coplanar altimeter satellite can then yield ocean surface heights above the geoid with 7° spatial resolution every two weeks. These data will furnish basic boundary condition information about mass and heat flows in the oceans which are important in shaping weather and climate.     

双星编队对空间非合作目标的仅测角跟踪方法

针对单星仅测角对目标跟踪误差较大和不良测量条件下跟踪精度下降的问题,提出利用编队卫星对非合作目标进行联合跟踪的方法。采用考虑地球非球形J2引力摄动的轨道动力学模型,建立多视线测量模型,融合编队卫星对目标的观测数据。然后,基于新息设计增益调节矩阵提高滤波器在测量故障条件下的鲁棒性。最后,建立仿真模型进行验证。仿真结果表明,相比单星跟踪,该方法的位置误差和速度误差分别减少了27.06%和26.96%。在系统存在异常量测时,相比常规滤波,该方法也具有更高的精确性和更好的鲁棒性。     

外测数据对流层折射误差修正及精度分析

针对对流层引起的航天器外测数据折射误差,基于对流层分段模型,以测站历史气象数据拟合折射衰减系数,建立测控站上空对流层折射率模型,并利用实测地面折射率对统计模型进行优化,进一步提高模型反映大气剖面的真实性.利用该模型对S频段多颗在轨卫星50多跟踪圈次的实测外测数据进行修正分析,并与微波辐射计实时修正结果进行比较,测距、测角、测速互差分别优于0.9m、0.02°、0.06 m/s.将该模型应用于卫星长管外测数据的实时修正,可提高轨道测量数据质量.     

A new high performance multipurpose satellite tracking system

The European Space Agency's (ESA) multipurpose satellite tracking system is introduced. The system is able to perform accurate satellite ranging and Doppler measurements for a variety of mission types, i.e., from near-Earth satellites to deep space probes. The ranging signal is analyzed and described in an analytical manner from which the limits of the system performance are derived. A model of the overall system is presented and a few simulation results obtained thereby are compared with measurements performed with the ESA's Giotto and Hipparcos scientific missions     

DF Vectoring: Application to Stationary Synchronous Satellites

Several methods of using an earth-based radio reference signal to determine the three-axis attitude of a synchronous satellite, and two types of spacecraft electronic systems (amplitude measurement and phase measurement), which obtain attitude and pointing information from the radio reference signal for orientating the spacecraft and for directing large-aperture antennas aboard the spacecraft are described. The earth-based radio reference signal also enables the electronic systems to determine angles to other ground stations with respect to fixed (reference) stations on the earth. These attitude- and angle-determining techniques are applicable to communications satellites, navigational satellites, and intersatellite data relay systems.     

Orbit Determination Accuracies Using Satellite-to-Satellite Tracking

The results are reported of the ATS-6/GEOS-3 and the ATS-6 NIMBUS-6 satellite-to-satellite orbit determination experiments. NASA intends to use the tracking data relay satellite system for operational orbit determination of NASA satellites. Hence, in the near future, satellite-to-satellite tracking data will be routinely processed to obtain orbits. The satellite-to-satellite tracking system used in the ATS-6/NIMBUS-6 and ATS-6/GEOS-3 experiments performed with a resolution of 1 to 2 m in range and less than 1 mm/s in range rate for a 10-s averaging. A Bayesian least squares estimation technique utilizing independent ranging to the synchronous relay satellite was determined to be the most effective procedure for estimating orbits from satellite-to-satellite tracking data. The use of this technique yields estimates of user satellite orbits which are comparable in accuracy to what is usually obtained from ground based systems.     

不同GNSS星载原子钟周期特性分析

高精度的卫星时钟修正是全球卫星导航系统实时精密单点定位和授时服务的重要基础。为了提高GNSS钟差预报精度，需要对GNSS星载原子钟的周期特性进行分析。基于2016年全年的GNSS精密卫星钟差数据，利用中位数方法进行了数据预处理，使用多项式拟合模型分析了卫星钟的拟合残差，利用频谱分析法分析了BDS、GPS卫星钟差的周期特性，全面分析了BDS、GPS星载原子钟的周期特性。分析结果表明：除Cs钟外，其他卫星钟差都表现出较好的周期特性，BDS、GPS的主周期项基本在12h、24h、6h附近；同时不同的轨道、原子钟，其钟差周期项不同，而相同的轨道类型，其钟差周期项也存在一定差异；卫星的钟差主周期分别近似为其卫星轨道周期的1/2倍、1倍、2倍。     

基于数字包络检波的RNSS通道时延标定方法

提出一种采用数字处理的时延测试方法,用于对导航卫星导航信号发射通道分数码片时延的精确测量。该方法是通过高速A/D（模/数）转换器,对导航卫星下行的BPSK（二进制相移键控）信号和卫星导航秒脉冲进行双通道采样,读取采样数据并进行数据处理。根据秒脉冲信号触发门限上升沿确定时延测量起点,对BPSK采样数据进行平方律检波,获取码片换相点,计算换相点和秒脉冲之间的分数码片时延,并进行滤波器时延校准,从而得到导航卫星发射链路的分数码片时延,该方法不需要进行伪随机信号的捕获和跟踪,测量精度主要取决于采样器采样率。通过在测试中使用一根校准电缆对该方法进行验证,验证结果表明,采用本文提出测试方法的测量误差优于0.3ns。     

基于I、Q信号的北斗接收机跟踪环路设计

传统的北斗接收机一般采用标量跟踪环,每个通道的卫星相互独立,在此 基础上,又发展起来了基于矢量跟踪的接收机,使每个通道的卫星跟踪不再相互独立。 提出的基于I、Q 信号观测的接收机跟踪环路,保留矢量跟踪的特点,并且采用EKF 作 为跟踪环路预处理滤波器,代替传统跟踪环路的鉴别器,可以在高动态的环境下对卫星 信号进行跟踪,提高环路的稳定性,从而可以有效地提高BDS/INS 深组合导航滤波器观 测量的估计精度。主要对高动态信号跟踪进行仿真,并与传统的标量跟踪方法和矢量跟 踪方法的跟踪能力进行比较。实验表明, 改进的矢量跟踪环能够在高动态的环境下运 行,比起传统环路有更小的跟踪误差。     

Precise orbit determination for TH02-02 satellites based on BDS3 and GPS observations

The Tianhui-2 02 (TH02-02) satellite formation, as a supplement to the microwave mapping satellite system Tianhui-2 01 (TH02-01), is the first Interferometric Synthetic Aperture Radar (InSAR) satellite formation-flying system that supports the tracking of BeiDou global navigation Satellite system (BDS3) new B1C and B2a signals. Meanwhile, the twin TH02-02 satellites also support the tracking of Global Positioning System (GPS) L1&L2 and BDS B1I&B3I signals. As the spaceborne receiver employs two independent boards to track the Global Navigation Satellite System (GNSS) satellites, we design an orbit determination strategy by estimating independent receiver clock offsets epoch by epoch for each GNSS to realize the multi-GNSS data fusion from different boards. The performance of the spaceborne receiver is evaluated and the contribution of BDS3 to the kinematic and reduced-dynamic Precise Orbit Determination (POD) of TH02-02 satellites is investigated. The tracking data onboard shows that the average number of available BDS3 and GPS satellites are 8.7 and 9.1, respectively. The carrier-to-noise ratio and carrier phase noise of BDS3 B1C and B2a signals are comparable to those of GPS. However, strong azimuth-related systematic biases are recognized in the pseudorange multipath errors of B1C and B3I. The pseudorange noise of BDS3 signals is better than that of GPS after eliminating the multipath errors from specific signals. Taking the GPS-based reduced-dynamic orbit with single-receiver ambiguity fixing technique as a reference, the results of BDS3-only and BDS3 + GPS combined POD are assessed. The Root Mean Square (RMS) of orbit comparison of BDS3-based kinematic and reduced-dynamic POD with reference orbit are better than 7 cm and 3 cm in three-Dimensional direction (3D). The POD performance based on B1C&B2a data is comparable to that based on B1I&B3I. The precision of BDS3 + GPS combined kinematic orbit can reach up to 3 cm (3D RMS), which has a more than 25% improvement relative to the GPS-only solution. In addition, the consistency between the BDS3 + GPS combined reduced-dynamic orbit and the GPS-based ambiguity-fixed orbit is better than 1.5 cm (3D RMS).