LQR与Fuzzy控制在飞机俯仰运动中的对比仿真

目的为解决传统PID控制控制参数固定、控制响应速度慢、超调量大,难以完成飞机自动驾驶仪俯仰系统控制的问题;方法分别设计LQR最优控制器和模糊控制器,并建立对应的Matlab控制模型进行仿真研究;结果阶跃响应仿真实验结果表明,飞机俯仰系统LQR控制器与模糊控制器比飞机俯仰系统PID控制器更好地实现对飞机俯仰角的控制,具有响应快速,超调小,误差小的优点;飞机俯仰系统LQR控制器比模糊控制器响应更快,跟踪性能更好;结论飞机俯仰系统模糊控制器在抗干扰鲁棒性、跟踪性能和稳态性能指标综合考虑上优于LQR控制器,更适用于实际的飞行环境。     

Nonlinear dynamics and station-keeping control of a rotating tethered satellite system in halo orbits

The dynamics of a rotating tethered satellite system （TSS） in the vicinity of libration points are highly nonlinear and inherently unstable. In order to fulfill the station-keep control of the rotating TSS along halo orbits, a nonlinear output tracking control scheme based on the θ- D technique is proposed. Compared with the popular time-variant linear quadratic regulator （LQR） controller, this approach overcomes some limitations such as on-line computations of the algebraic Riccati equation. Besides, the obtained nonlinear suboptimal controller is in a closed form and easy to implement. Numerical simulations show that the TTS trajectories track the periodic reference orbit with low energy consumption in the presence of both tether and initial injection errors. The axis of rotation can keep pointing to an inertial specific object to fulfill an observation mission. In addition, the thrusts required by the controller are in an acceptable range and can be implemented through some low-thrust propulsion devices.     

一种改进的基于分解控制的非线性力矩补偿策略及其在直流电机系统中的应用

 针对直流电机系统中存在的非线性摩擦力矩和波动力矩，提出一种改进的非线性力矩补偿策略，将重复控制机制引入到基于分解控制的补偿策略中。其中，鲁棒自适应补偿器用来补偿系统中存在的非线性摩擦力矩和波动力矩；而插入的重复控制器用来进一步提高系统运动曲线的跟踪性能。二者的综合构成了系统完整的控制律。Lyapunov方法证明了闭环控制系统的全局稳定性。最后，通过对高精度伺服系统的仿真研究证明了该改进补偿策略的有效性。     

Compound Control for Hydraulic Flight Motion Simulator

The design of a compound control is presented for the servo system of hydraulic flight motion simulator, which suffers from highly nonlinear dynamics, large parameter time-variation and severe load coupling among channels. The compound control is composed of a robust feedback controller and a feedforward compensator. The design aim is to achieve high tracking performance even in the presence of considerable uncertainty, external disturbance and load coupling among channels. Toward this aim the feedback controller for rejecting perturbation and disturbance is designed by using μ synthesis optimization technique and the feedforward compensator for compensating time lag of dynamic system is established based on the basic idea of zero phase error tracking. To validate the proposed control strategy, simulations and experiments are implemented, and show that the resulting system is highly robust against model perturbation and possesses excellent capability of suppressing the load coupling and improving the tracking performance.     

Sliding mode tracking control for miniature unmanned helicopters

A sliding mode control design for a miniature unmanned helicopter is presented. The control objective is to let the helicopter track some predefined velocity and yaw trajectories. A new sliding mode control design method is developed based on a linearized dynamic model. In order to facilitate the control design, the helicopter’s dynamic model is divided into two subsystems,such as the longitudinal-lateral and the heading-heave subsystem. The proposed controller employs sliding mode control technique to compensate for the immeasurable flapping angles’ dynamic effects and external disturbances. The global asymptotic stability(GAS) of the closed-loop system is proved by the Lyapunov based stability analysis. Numerical simulations demonstrate that the proposed controller can achieve superior tracking performance compared with the proportionalintegral-derivative(PID) and linear-quadratic regulator(LQR) cascaded controller in the presence of wind gust disturbances.     

Helicopter Motion: Equation Linearization

The nonlinear set of equations which represent helicopter motion is linearized about a prescribed nominal state. Once the linearized system is obtained it is validated by comparing the output of the nonlinear system to that of its linearized counterpart. Having obtained a linear model, linear system theory may then be applied in order to investigate the stability and control characteristics of the aircraft.     

基于系统分解的三自由度直升机控制仿真研究

三自由度直升机模型是多变量、非线性、强耦合的复杂控制对象,针对对象维数较高,控制器不易设计的问题,提出了一种基于系统分解的控制方法。首先建立了直升机的数学模型,并通过输入-状态线性化方法将模型线性化;其次将模型分解为两个子系统;最后分别采用无静差跟踪方法与PD控制方法设计子系统控制器。该方法通过模型分解,可大大降低控制器设计难度。仿真结果表明直升机姿态轨迹跟踪效果良好。     

Terminal Sliding Mode Control for Spacecraft Formation Flying

This paper considers the problem of relative motion control for spacecraft formation flying (SFF). Using terminal sliding mode technique, a relative position/velocity tracking control based on the nonlinear model is developed. The presented controller enables rapid formation reconfiguration with feasible fuel cost and strong robustness in the presence of uncertain but bounded disturbances. A nonlinear model with J₂ disturbance and bounded uncertainties is used for dynamic simulation.     

基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模控制

针对涡扇发动机内部状态大范围变化条件下,单点线性控制器控制效果不佳而线性变参数控制器求解困难的问题,提出了一种基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模变结构控制。首先,采用多入多出平衡流形展开模型辨识技术,获得仿射型的涡扇发动机数学模型。随后,利用反馈线性化将平衡流形展开模型解耦,经过坐标变换获得可用于控制系统设计的线性结果,考虑了具有误差项和饱和函数的指数趋近滑模控制律来提高控制系统的鲁棒性,完成了基于平衡流形展开模型的多变量涡扇发动机反馈线性化滑模控制器设计。最后,在非线性部件级模型上开展了控制器验证。在平衡流形展开模型设计工况,增益控制和滑模控制的控制效果表明,基于平衡流形展开模型的反馈线性化方法能够获得涡扇发动机良好的控制效果。同时,在平衡流形展开模型稳定但精度无法保证的非设计飞行工况,反馈线性化滑模控制器能够进一步抑制不确定性的影响,保证转子转速和发动机压比的跟踪控制效果。     

航空发动机控制系统中的增广LQR方法

采用一种增广LQR方法,将原系统状态的导数和指令跟踪的误差作为增广的状态向量,使设计出来的多变量系统不仅具有LQR的好的鲁棒性,而且在用于指令跟踪时能消除稳态误差。当状态量不是全部可测时,本文采用降维观测器得到一种准最优的增广LQR方法,其性能比LQG方法有显著改善,能满足航空发动机多变量控制系统的设计要求。最后,数字仿真验证了本文提出的方法。      

基于IMMKF算法的ADS-B监视应用目标跟踪

目标跟踪是机载广播式自动相关监视（ADS-B）应用的基础功能,对提升航空器周边的弱机动民航飞机目标跟踪性能具有重要意义。提出一种基于交互式多模型卡尔曼滤波（IMMKF）算法的ADS-B 监视应用目标跟踪方法。首先,针对弱机动背景下的民航飞机的飞行特点,建立包含匀速模型和标准协同转弯模型的运动模型集,并对模型进行线性化近似;然后,将模型预测和ADS-B 状态矢量量测数据作为IMMKF 算法中多个并行卡尔曼滤波器的输入,进行并行滤波;最后,计算得到目标状态矢量的估计和模型近似概率,并作为下一次迭代的输入。结果表明：相比于基于匀速模型的卡尔曼滤波目标跟踪方法,IMMKF 方法的位置跟踪误差降低了59%,速度跟踪误差降低了77%,显著提升了状态估计性能,具备较高的跟踪精度、稳健性与计算效率,在ADS-B 监视应用中具有实际应用价值与借鉴意义。     

带后缘小翼的旋翼振动载荷计算

建立了考虑弹性桨叶、刚性小翼的旋翼气动弹性分析模型和旋翼载荷计算方法.以广义质量和广义力的形式描述小翼惯性力和气动力对系统的影响,以非定常/动态失速模型计算剖面气动力,结合基于实验数据修正的组合气动模型计算带小翼部分的剖面气动力,集成大变形桨叶模型考虑弹性变形的非线性,以力积分法计算桨叶剖面振动载荷.通过计算分析与实验结果相比较,验证了建立的气动弹性模型和载荷计算方法.结果表明:建立的桨叶结构模型精度很高,气弹模型能够准确预测旋翼的振动载荷,挥舞弯矩平均误差控制在9.1%,使用修正的小翼气动模型能有效提高小翼运动时桨叶振动载荷的计算精度.      

航空发动机LQR控制的模糊神经网络方法

针对线性二次型调节器LQR在航空发动机多变量控制中存在的存储量需求太大的问题,提出了相应的自适应神经网络模糊控制方法。根据某型发动机飞行包线内给定工作点的线性化模型,分别设计控制器,并将分别设计的控制器用自适应神经网络模糊推理的方法进行综合,使之成为一个非线性的控制器,由此可以得出其它工作点的LQR设计结果。该方法能够在一定程度上弥补LQR控制的缺陷,仿真实例表明了其有效性。      

非线性预测控制在巡航导弹地形跟踪中的应用

建立了巡航导弹的非线性动力学模型,针对该模型的非线性连续预测控制方法,提出了预测跟踪误差和跟踪误差线性组合的性能指标,通过使性能指标最小,产生了巡航导弹地形跟踪的最优非线性反馈控制器,通过对虚拟地形的跟踪验证了控制器的性能,结果表明,该控制器不仅具有精确的跟踪性能而且具有良好的鲁棒性。     

Conceptual design and flight test of two wingtip-docked multi-body aircraft

To overcome the drawbacks such as large wing deformations, poor performance encountering gusts, limits in taking off and landing, inconvenience of transportation of High-Altitude Long-Endurance (HALE) Unmanned Aerial Vehicles (UAVs), a new conceptual aircraft called wingtip-docked Multi-Body Aircraft (MBA) has attracted lots of attentions. Aiming to investigate the feasibility of this concept, two UAV models were designed, manufactured and connected by a wingtip-docking mechanism, which only allows the relative roll motion between the two aircraft. The trim solution of the two connected aircraft is firstly obtained by solving the developed nonlinear flight dynamic equations, followed by the stability analysis based on the linearized model. The results show that the connected aircraft is inherently unstable and cannot fly without a reasonable flight control system. A set of Proportional-Integral-Derivative (PID) control laws was then developed and implemented in the two experimental aircraft. The success of the flight tests show that the flight control can effectively eliminate the unstable motion and the wingtip-docked MBA is controllable and feasible.     

NONLINEAR PREDICTIVE CONTROL FOR TERRAIN FOLLOWING

ＮＯＮＬＩＮＥＡＲＰＲＥＤＩＣＴＩＶＥＣＯＮＴＲＯＬＦＯＲＴＥＲＲＡＩＮＦＯＬＬＯＷＩＮＧＣｕｉＨｕｔａｏ（崔祜涛），ＧｅｎｇＹｕｎｈａｉ（耿云海），ＹａｎｇＤｉ（杨涤）（ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎｏｌｏｇｙ，Ｐ．Ｏ．Ｂｏｘ１３７，...     

使用变速控制力矩陀螺的航天器鲁棒自适应姿态跟踪控制

 研究以变速控制力矩陀螺群（VSCMGs）为执行机构的航天器姿态跟踪问题。采用四元数描述姿态, 在姿态误差的描述中引入了现时姿态与期望姿态之间的方向余弦矩阵。考虑执行机构模型参数不确定和有外干扰的情况, 姿态误差动力学方程为多输入多输出(MIMO)的非线性系统。基于Lyapunov理论设计了鲁棒自适应控制器, 运用光滑投影算法避免了估计参数陷入奇异。仿真结果表明, 设计的鲁棒自适应控制律明显地缩小了姿态跟踪误差, 很好地解决了外部环境干扰和执行机构由于安装误差或机械磨损造成的轴承方向未对准的问题。     

Friction compensation for low velocity control of hydraulic flight motion simulator: A simple adaptive robust approach

Low-velocity tracking capability is a key performance of flight motion simulator (FMS), which is mainly affected by the nonlinear friction force. Though many compensation schemes with ad hoc friction models have been proposed, this paper deals with low-velocity control without friction model, since it is easy to be implemented in practice. Firstly, a nonlinear model of the FMS middle frame, which is driven by a hydraulic rotary actuator, is built. Noting that in the low velocity region, the unmodeled friction force is mainly characterized by a changing-slowly part, thus a simple adaptive law can be employed to learn this changing-slowly part and compensate it. To guarantee the boundedness of adaptation process, a discontinuous projection is utilized and then a robust scheme is proposed. The controller achieves a prescribed output tracking transient performance and final tracking accuracy in general while obtaining asymptotic output tracking in the absence of modeling errors. In addition, a saturated projection adaptive scheme is proposed to improve the globally learning capability when the velocity becomes large, which might make the previous proposed projection-based adaptive law be unstable. Theoretical and extensive experimental results are obtained to verify the high-performance nature of the proposed adaptive robust control strategy.     

基于鲁棒伺服 LQR的无人机横航向自动着陆控制律设计

针对无人机自动着陆过程中外部不确定性强,影响控制精度和飞行安全的问题,提出一种基于鲁棒伺服线性二次型(Linear Quadratic Regulator,LQR)的横航向自动着陆控制律设计方法。基于鲁棒伺服LQR设计滚转姿态保持内回路,设计航向保持/预选模态和航向信标(Localizer,LOC)截获与跟踪模态,实现横航向轨迹的稳定与精确跟踪。数字仿真结果表明,该方法具有较好的控制效果。     

Decoupled ultimate boundedness control of systems and largeaircraft maneuver

The robust trajectory control of a class of nonlinear systems which can be decoupled by state-variable feedback is considered. It is assumed that the system matrices are unknown but bounded. A nonlinear control law is derived so that the tracking error in the closed-loop system is uniformly bounded and tends to a certain small neighborhood of the origin. The error dynamics are asymptotically decoupled in an approximate sense. The controller includes a reference trajectory generator and uses the integral feedback of the tracking error. On the basis of this result, a flight control system is designed for the control of roll angle, angle of attack, and sideslip in rapid, nonlinear maneuvers of aircraft. Simulation results are presented to show that large, simultaneous lateral and longitudinal maneuvers can be performed in spite of the uncertainty in the stability derivatives