建模不确定性下变循环发动机自适应控制器设计

针对变循环航空发动机存在建模不确定情况下的多变量控制器设计问题,给出了一种最优律下的增广模型参考自适应跟踪补偿设计方法,阐明变循环发动机建模不确定性并引出LQR(Linear Quadratic Regulator)基准控制器动态跟踪不足的问题,进而在基准控制器反馈控制结构框架下,分别实现以下技术突破:确定期望闭环动态的参考模型、基于李亚普诺夫函数严格稳定证明下建立存在建模不确定性的自适应律等,最终以达到系统跟踪误差渐进为零的目标,改善系统不确定性的动态跟踪问题。对变循环航空发动机的控制器仿真结果表明:增广模型参考自适应控制方法改善了原LQR基准控制器对存在建模不确定性时的控制问题,有效地实现了控制指令跟踪,达到了所期望的动态响应,且自适应参数一致渐进稳定。同时,各标称点的稳态控制误差均小于0.3%,系统超调量小于0.8%,调节时间小于1s,符合航空发动机控制系统技术要求。     

挠性卫星大角度机动的混合控制方法研究

对于具有不确定性的多输人多输出非线性系统,仅用v0线性化设计方法不能获得好的控制结果.为此,设计了自适应模糊控制器,把I/O线性化方法和自适应模糊控制相结合,构成混合控制器.并将此控制器引人到卫星大角度机动控制系统中,以补偿由系统的不确定性所造成的跟踪误差,从而增强I/O线性化控制器的鲁棒性,最终实现零误差跟踪.     

不确定性的自适应跟踪补偿控制及在航空发动机的应用

针对多变量系统存在不确定性导致的控制性能下降问题,提出了一种基于最优控制律的增广模型参考自适应控制器补偿设计方法。通过采用最优LQR控制律实现系统性能的优化设计从而建立基本控制器,以反馈控制结构为框架,对该最优LQR基本控制器实现增广设计,以改善系统的动态跟踪和抗干扰特性,以双转子航空发动机为对象实现控制器的仿真验证。结果表明:通过增广自适应控制实现了原LQR基本控制器对系统不确定性的跟踪补偿,有效地实现了控制指令跟踪,达到了期望响应性能,控制误差小于0.25%,超调量小于0.5%,且调节时间小于1.5s,符合发动机控制系统技术要求;同时,改善了原基本控制系统在不确定性时的不稳定控制效果,保证了系统一致渐近稳定。     

H∞控制在飞行/推进综合控制系统中的应用

研究了多变量控制技术应用于飞行/推进一体化控制器的设计问题。对于耦合的飞行子系统和推进子系统,建立了飞行/推进综合模型,分析了对模型输出端乘性不确定性和对跟踪误差性能不确定性的飞行/推进综合多变量反馈控制系统转化为混合灵敏度函数整形问题设计的途径,提出了一种按时间加权的误差平方积分(ITAE)准则选择加权灵敏度函数的方法,应用混合加权灵敏度H∞控制器的设计方法对飞行/推进一体化模型进行了设计,并对所求的最优控制器进行了控制系统性能仿真验证。     

卫星光通信APT控制系统H∞设计

 捕获瞄准跟踪(APT)控制系统的设计是影响整个星间光通信系统性能的重要因素。利用指向偏差的概率分布阐述了卫星光通信过程中捕获概率、跟踪误差及误码率受卫星平台振动和终端装置参数摄动的影响,通过功率谱分析了卫星平台振动在低频段、对象不确定性在高频段对指向偏差的影响,并对其进行了模型化分析。采用H_∞控制混合灵敏度设计方法同时抑制干扰和处理受控对象不确定性问题进行控制器设计。仿真验证表明该方法得到的控制器对平台干扰具有抑制力,对对象摄动具有鲁棒性。     

直连式三体绳系卫星姿态鲁棒最优跟踪控制

 针对存在参数不确定性以及外部有界干扰的直连式三体旋转绳系卫星系统姿态跟踪控制问题,提出了一种分布式鲁棒最优控制方法。该方法首先针对单体绳系卫星姿态模型,在不考虑参数不确定性和干扰的条件下,应用Hamilton-Jacobi-Bellman方程设计了最优控制器;接着,考虑到实际系统存在参数不确定性和干扰,采用自适应与鲁棒误差积分方法在线学习参数不确定性和有界干扰,与最优控制器结合设计了鲁棒最优控制器,使闭环系统满足了性能指标达到最小的要求,并应用Lyapunov稳定性定理证明了其闭环系统的渐近稳定性。进一步考虑到绳系卫星系统的运动同步性,将单体绳系卫星姿态控制器设计扩展至直连式三体绳系卫星姿态系统,设计了分布式鲁棒最优控制器。最后在MATLAB/Simulink平台上进行了仿真,验证了方法的可行性与有效性,表明其具有潜在的应用前景。     

高空台飞行环境模拟系统温度延时不确定性μ综合设计

针对高空台飞行环境模拟系统温度大延时特性的控制问题,提出了一种考虑温度延时不确定性的两自由度μ综合控制设计方法以提升其温度的控制精度。在考虑变比热容腔微分方程、管壁传热、调节阀流量特性、液压伺服动态、传感器增益以及温度延迟对飞行环境模拟系统造成的建模不确定性的基础上,建立了完整、准确的非线性延时模型。在考虑执行机构参数、温度延时不确定性的基础上,提出了两自由度的μ综合控制设计方法。为了确保设计的控制器具有良好鲁棒伺服跟踪性能,基于分频设计的思想设计性能加权函数和控制量加权函数,并运用D-K迭代算法设计控制器。假定了包含"等马赫数爬升"和"平飞加速"的试验过程来验证μ综合控制器的伺服跟踪性能,仿真结果表明,飞行环境模拟系统温度和压力的稳态和动态误差分别均不大于1.5%和3%。     

卫星姿态跟踪系统的鲁棒控制器设计

研究了具有参数不确定性和外部干扰的卫星姿态跟踪控制问题。针对这一类多输入／多输出不确定非线性系统，提出了一个基于不确定项上界的鲁棒输出跟踪控制器设计方法。应用输入／输出反馈线性化法和李亚普诺夫方法，设计了一个控制律，它可确保系统输出按指数规律跟踪期望输出。该控制器计算简单，易于实现。仿真结果表明：即使系统存在不确定性，仍可在闭环系统中实现精确的姿态控制。     

吸气式高超声速飞行器鲁棒非奇异Terminal滑模反步控制

针对含有参数摄动、外界干扰的吸气式高超声速飞行器弹性模型,设计了一种基于新型非线性干扰观测器的Terminal滑模反步控制器。将考虑弹性模态的飞行器纵向模型表示为严格反馈形式,在传统反步法的基础上采用非奇异快速Terminal滑模控制俯仰角与俯仰角速率,优化了反步法的控制结构,并实现了系统的有限时间收敛。基于跟踪微分器设计了一种新型非线性干扰观测器,并与本文所提滑模反步方法相结合,通过对包括虚拟控制量微分信号在内的不确定性进行估计与补偿,进一步提高了控制器的鲁棒性,同时解决了"微分膨胀"问题。基于Lyapunov稳定性理论证明了系统的跟踪误差于有限时间收敛至零。仿真结果表明,该控制器在存在不确定性的情况下,可以实现对参考输入的稳定跟踪。     

飞机纵向非线性系统的鲁棒输出跟踪控制器设计

研究了单输入单输出非线性不确定系统的鲁棒输出跟踪控制。在标称系统可输入/输出线性化、不确定性项有界且满足广义匹配条件的情况下,可得到系统的高增益鲁棒输出跟踪控制器。鲁棒控制器仅依赖于设计参数和不确定性的界。将该方法应用于飞机纵向高阶非线性动态的控制器设计,并进行了数字仿真。结果表明了该方法的有效性。     

液压Stewart平台基于工作空间综合偏差的同步控制

 为了抑制轨迹跟踪过程中各自由度运动之间的相互干扰,将平台跟踪的轨迹进行泰勒级数展开,提出基于工作空间含有各向自由度运动自身跟踪偏差和各自由度运动之间耦合干扰偏差的综合轨迹跟踪偏差量的表达式。根据工作空间综合偏差量反馈,利用反步法设计鲁棒控制器,使各向自由度运动自身跟踪偏差与之间的耦合偏差同时稳定地趋于零,以限制跟踪过程中各自由度运动之间耦合干扰。同时,考虑到实际平台惯性参数不确定性,推导得出惯性参数自适应律,以提高系统的跟踪精度。利用AMESim与MATLAB进行联合仿真验证,结果表明:与传统的比例 积分 微分（PID）控制器相比,该方法在保证各自由度运动自身跟踪偏差稳定收敛的同时有效地降低了各自由度运动之间的耦合干扰偏差,更有效地提高了平台的跟踪性能。     

Robust fault-tolerant attitude control for satellite with multiple uncertainties and actuator faults

In this paper, the satellite attitude control system subject to parametric perturbations, external disturbances, time-varying input delays, actuator faults and saturation is studied. In order to make the controller architecture simple and practical, the closed-loop system is transformed into a disturbance-free nominal system and an equivalent disturbance firstly. The equivalent disturbance represents all above uncertainties and actuator failures of the original system. Then a robust controller is proposed in a simple composition consisting of a nominal controller and a robust compensator. The nominal controller is designed for the transformed nominal system. The robust compensator is developed from a second-order filter to restrict the influence of the equivalent disturbance. Stability analysis indicates that both attitude tracking errors and compensator states can converge into the given neighborhood of the origin in finite time. To verify the effectiveness of the proposed control law, numerical simulations are carried out in different cases. Presented results demonstrate that the high-precision attitude tracking control can be achieved by the proposed fault-tolerant control law. Furthermore, multiple system performances including the control accuracy and energy consumption index are fully discussed under a series of compensator parameters.     

基于自适应模糊系统的空天飞行器非线性预测控制

 针对一类多输入多输出非线性不确定系统,提出了基于自适应模糊系统的非线性预测控制方法。控制器由基于模糊系统的非线性预测控制器和鲁棒自适应控制器两个部分组成。根据系统的跟踪误差在线调整模糊系统的权值,使得模糊系统一致逼近被控对象中的非线性函数,通过泰勒展开设计出基于模糊系统的非线性预测控制律,避免了预测控制在线优化带来的繁重的计算负担。鲁棒自适应控制器则用于减少不确定和模糊逼近误差对系统的影响。所设计的控制器保证了闭环系统的最终一致有界稳定。基于Lyapunov稳定原理,给出了理论证明和分析。最后利用提出的控制方案设计了空天飞行器高超声速飞行姿态的控制系统,仿真结果表明了控制方案的有效性。     

基于有向图的航天器编队飞行自适应姿态协同控制

在有向通信拓扑下研究了编队航天器自适应姿态协同控制问题。针对航天器编队飞行系统中存在外部扰动和模型不确定性的情况,通过选取包含相对姿态误差和绝对姿态误差的辅助变量,提出了一种鲁棒自适应控制策略。提出了自适应律估计转动惯量矩阵和扰动上界等未知参数,并且利用Lyapunov稳定性理论分析了闭环系统的渐近稳定性。与滑模控制等传统鲁棒控制不同,所设计的鲁棒自适应控制器是连续的,更便于航天器编队飞行系统的实现。最后通过仿真验证了该控制策略能够实现高精度的编队飞行跟踪控制。     

Two freedom linear parameter varying μ synthesis control for flight environment testbed

To solve the problem of robust servo performance of Flight Environment Testbed(FET)of Altitude Ground Test Facilities(AGTF) over the whole operational envelope, a two-degree-offreedom μ synthesis method based on Linear Parameter Varying(LPV) schematic is proposed, and meanwhile a new structure frame of μ synthesis control on two degrees of freedom with double integral and weighting functions is presented, which constitutes a core support part of the paper. Aimed at the problem of reference command's rapid change, one freedom feed forward is adopted, while another freedom output feedback is used to meet good servo tracking as well as disturbance and noise rejection; furthermore, to overcome the overshoot problem and acquire dynamic tuning,the integral is introduced in inner loop, and another integral controller is used in outer loop in order to guarantee steady errors; additionally, two performance weighting functions are designed to achieve robust specialty and control energy limit considering the uncertainties in system. As the schedule parameters change over large flight envelope, the stability of closed-loop LPV system is proved using Lyapunov inequalities. The simulation results show that the relative tracking errors of temperature and pressure are less than 0.5% with LPV μ synthesis controller. Meanwhile, compared with non-LPV μ synthesis controller in large uncertainty range, the proposed approach in this research can ensure robust servo performance of FET over the whole operational envelope.     

Modified robust optimal adaptive control for flight environment simulation system with heat transfer uncertainty

To solve the rapid transient control problem of Flight Environment Simulation System (FESS) of Altitude Ground Test Facilities (AGTF) with large heat transfer uncertainty and disturbance, a new adaptive control structure of modified robust optimal adaptive control is presented. The mathematic modeling of FESS is given and the influence of heat transfer is analyzed through energy view. To consider the influence of heat transfer in controller design, we introduce a matched uncertainty that represents heat transfer influence in the linearized system of FESS. Based on this linear system, we deduce the design of modified robust optimal adaptive control law in a general way. Meanwhile, the robust stability of the modified robust optimal adaptive control law is proved through using Lyapunov stability theory. Then, a typical aero-engine test condition with Mach Dash and Zoom-Climb is used to verify the effectiveness of the devised adaptive controller. The simulation results show that the designed controller has servo tracking and disturbance rejection performance under heat transfer uncertainty and disturbance; the relative steady-state and dynamic errors of pressure and temperature are both smaller than 1% and 0.2% respectively. Furthermore, the influence of the modification parameter γ is analyzed through simulation. Finally, comparing with the standard ideal model reference adaptive controller, the modified robust optimal adaptive controller obviously provides better control performance than the ideal model reference adaptive controller does.     

Robust Control for Static Loading of Electro-hydraulic Load Simulator with Friction Compensation

Load simulator is a key test equipment for aircraft actuation systems in hardware-in-the-loop-simulation. Static loading is an essential function of the load simulator and widely used in the static/dynamic stiffness test of aircraft actuation systems. The tracking performance of the static loading is studied in this paper. Firstly, the nonlinear mathematical models of the hydraulic load simulator are derived, and the feedback linearization method is employed to construct a feed-forward controller to improve the force tracking performance. Considering the effect of the friction, a LuGre model based friction compensation is synthesized, in which the unmeasurable state is estimated by a dual state observer via a controlled learning mechanism to guarantee that the estimation is bounded. The modeling errors are attenuated by a well-designed robust controller with a control accuracy measured by a design parameter. Employing the dual state observer is to capture the different effects of the unmeasured state and hence can improve the friction compensation accuracy. The tracking performance is summarized by a derived theorem. Experimental results are also obtained to verify the high performance nature of the proposed control strategy.     

Robust adaptive compensation control for unmanned autonomous helicopter with input saturation and actuator faults

This paper studies a robust adaptive compensation Fault Tolerant Control(FTC) for the medium-scale Unmanned Autonomous Helicopter(UAH) in the presence of external disturbances,actuator faults and input saturation.To improve the disturbance rejection capacity of the UAH system in actuator healthy case, an adaptive control method is adopted to cope with the external disturbances and a nominal controller is proposed to stabilize the system.Meanwhile, compensation control inputs are designed to reduce the negative effects derived from actuator faults and input saturation.Based on the backstepping control and inner-outer loop control technologies, a robust adaptive FTC scheme is developed to guarantee the tracking errors convergence.Under the presented FTC controller, the uniform ultimate boundedness of all closed-loop signals is ensured via Lyapunov stability analysis.Simulation results demonstrate the effectiveness of the proposed control algorithm.     

Attitude tracking control for variable structure near space vehicles based on switched nonlinear systems

An adaptive robust attitude tracking control law based on switched nonlinear systems is presented for a variable structure near space vehicle (VSNSV) in the presence of uncertainties and disturbances. The adaptive fuzzy systems are employed for approximating unknown functions in the flight dynamic model and their parameters are updated online. To improve the flight robust performance, robust controllers with adaptive gains are designed to compensate for the approximation errors and thus they have less design conservation. Moreover, a systematic procedure is developed for the synthesis of adaptive fuzzy dynamic surface control (DSC) approach. According to the common Lyapunov function theory, it is proved that all signals of the closed-loop system are uniformly ultimately bounded by the continuous controller. The simulation results demonstrate the effectiveness and robustness of the proposed control scheme.