共查询到16条相似文献,搜索用时 453 毫秒
1.
航空动态重力测量是快速获取地球重力场信息的有效手段,从广泛噪声中高精度提取重力信息的数据处理技术是重力测量的关键环节。本文首先分析了测量噪声的来源及误差特性,且明确了现阶段常用的有限冲激响应(FIR)低通滤波器可以有效滤除高频噪声。其次,针对动态特性误差和偶然误差,提出基于经验模态分解(EMD)的误差分离方法。再次,提出了适用于多条重复测线的系统平差方法,有效抑制了低频系统误差的影响。最后,对航空实测数据进行了处理。试验结果表明,基于EMD的误差分离方法将内符合精度从2.86mGal提升至0.75mGal,重复测线系统平差方法将精度进一步提升至0.28mGal。该研究对提升航空重力测量系统在数据处理技术成熟度及实用化水平方面有重要意义。 相似文献
2.
3.
重力数据处理对获取高精度重力异常值有着重要作用,是重力测量的核心技术。重力仪在搭载运动载体进行重力测量时,载体的高频振动对重力测量数据和GPS数据均会产生不可避免的干扰,导致提取的重力异常粗值含有大量高频噪声。围绕重力数据的处理方法这一核心技术,介绍了FIR低通滤波、零相移滤波、标准Kalman滤波、正反Kalman滤波4种滤波方法的基本原理,运用这4种方法处理了SAG捷联式重力仪的某次实际飞行测量数据,比对了基于SINS/GPS组合导航和SINS/DGPS组合导航的重力测量数据处理结果。通过对本次试验重复测线内符合精度进行比对,验证了4种方法的可行性和优劣性,同时验证了SAG重力仪的测量精度。 相似文献
4.
本文针对航空重力测量中利用单基准站差分GNSS方法估计载体加速度的局限性,提出了两种基于PPP的载体加速度高精度估计方法—位置差分法和相位差分法。在详细推导了两种估计方法解算方程的基础上,研究总结了方法各自的特点与优势,最后通过实验分析了卫星导航误差源对两种方法的影响。实验研究表明,相位差分法在抑制低阶误差方面更具优势;-2~+2周的整周模糊度解算偏差对位置差分法的加速度估计结果在滤波后产生近10mGal的影响;在数据采样间隔为1s时,1周的周跳对相位差分法的加速度估计结果产生数千mGal的误差。研究结果能为航空重力测量中利用PPP高精度估计重力仪加速度提供一定的理论指导,尤其对难以建站的测区的重力测量具有重大意义。 相似文献
5.
惯性导航系统中加速度计测量的比力是载体运动加速度与重力加速度的矢量和,当载体运动加速度能够被有效分离时,满足一定精度水平的惯性导航系统就可以成为动态重力仪。捷联式惯性导航系统体积小、重量轻、系统组成简单,可以在记录下惯性器件原始输出信息之后,通过离线处理过程进行数据处理和精度挖掘。本文通过对某高精度激光捷联惯导进行相应的软硬件更改,获得了兼具导航及重力测量功能的一体式动态重力仪。地面车载试验是验证动态重力仪的测量精度的有效手段之一,本文将一组高速公路重复测线的数据进行了处理和分析,结果表明在平均车速72km/hr的条件下,半波长分辨率2km,自由空间重力异常内符合精度优于1mGal。 相似文献
6.
7.
介绍了自主研制的GIPS-1A三轴惯性平台式航空重力仪的组成、工作流程及技术指标,并给出了机载重力测量试验系统的集成方法和数据处理方法.经实际机载航空重力重复线精度测试和试生产测试,重复线内符合精度优于0.6mGal@0.01Hz;与国际上性能优异的GT-2A重力仪相比,重复线符合度好,试生产交叉点总精度相当,且异常形态吻合度也很好.实验结果表明,GIPS-1A重力仪达到了国际上先进仪器的精度水平,并且在风扰适应性、体积、质量等方面表现突出,可满足实际工程应用需求. 相似文献
8.
9.
10.
11.
《Aerospace Science and Technology》1999,3(6):379-389
Aircraft operation at low altitude is affected by turbulence producing additional aerodynamic forces and moments. This results in aircraft acceleration and reduces the performance of an airborne gravimeter substantially. To reduce this effect, a gust alleviation control system is necessary. In this paper the control performance of an Open-Loop Control System is examined in the frequency and time domain. The analysis is made by computation of the power density spectra of the vertical and the horizontal acceleration in geodetic co-ordinates. The design objective for the gust alleviation system is a considerable improvement of the gravity measurement accuracy, in particular in the frequency range between 0 Hz and 1 Hz. The requirements of the gravity measurement are at 1 km anomaly wavelength and 1 mGal of accuracy. 相似文献
12.
13.
《Aerospace Science and Technology》2001,5(6):413-424
A fundamental survey of vehicle mounted gravimeters shows the superposition from the gravity and the kinematical acceleration due to item modification. The particular problems of airborne gravimetry lie in the presence of relatively strong disturbances due to air turbulence. The vehicle acceleration caused in this manner is from high dynamics and up to a factor of 106 greater than the anomaly signal (local changes of acceleration due to the earth's gravitation). Thus, the technically scientific problem of utilizing gravimeters in airplanes lies in a suitable compensation for the vehicle's acceleration. The measurement methods applied reduce the high frequency disturbance signal with the aid of a low-pass filter. These methods are restricted only for the localization of very large anomalies. The required resolution for an air gravimeter cannot be reached only through a direct low-pass or band-pass filtering, since the frequency ranges of the disturbance and the anomaly overlap. A clear improvement of the resolution requires completely new concepts. For separating gravity and kinematical acceleration, there must be further sensors that are not influenced by gravity, e.g. altimeter and the Global Positioning System (GPS). An overall system, into which the individual sensors are integrated and associated via suitable complementary filtering with each other, allows it to register gravity with a higher resolution than is presently possible. 相似文献
14.
机载单站无源定位系统中相位差变化率提取方法(英文) 总被引:4,自引:0,他引:4
相位差变化率含有目标辐射源的距离信息,是机载单站无源定位系统中的重要参数。本文以正弦单载波脉冲信号为例,分析了基于相位差变化率的单站无源定位原理,以及测量误差的组成。基于对Cramer-Rao下限的分析,提出了一种基于多次观测的相位差变化率的高精度测量方法——时间片处理法。在相位差变化率的测量中,当信噪比较低时,频域鉴相方法优于时域鉴相方法,多时间片处理能够显著地降低测量方差,仿真验证了此算法的正确性和有效性。典型的无源定位场景的仿真验证了算法对动态测量的适应性。此测量算法简单、计算量小,易于实现。 相似文献
15.
16.
随着重力测量和水下导航技术的发展,惯性/重力匹配导航技术因其精度高、自主性强和航时长等优点,已成为水下自主导航的重要研究方向。惯性/重力匹配导航系统主要由惯性导航系统、重力实时测量、海洋重力场背景图和重力匹配定位算法构成。重力匹配定位算法通过将实时测量的重力异常值与构建的重力场背景图进行匹配,得到水下运载体当前时刻的位置信息,是惯性/重力匹配导航技术的核心。本文详细介绍了重力匹配算法的技术发展现状,重点分析了具有代表性的ICCP算法、SITAN算法、矢量匹配算法及其衍生算法,并对惯性/重力匹配水下自主导航技术的未来发展进行了展望。 相似文献