Integrated RF-optical TT&C for interplanetary telecomms

Science return and high bandwidth communications are one of the key issues to support the foreseen endeavours on next generation missions [J.L. Gerner, Telemetry, tracking and command of satellites—a perspective, TT&C 2004 Workshop, 7–9 September 2004]. Interplanetary telecommunication systems are required that support the foreseen endeavours. Given the same constraints in terms of mass, power and volume a laser communications terminal can offer an increase in telemetry bandwidth over classical RF technology allowing for a variety of new options, specifically to missions that require large distances, such as to the Moon, to liberation points L1 and L2, ultimately aiming at deep space missions. An increase in telemetry data rate allows the mission to consider the processing of raw scientific data to take place on ground, making use of latest technology further developed during the cruise phase of the probe, rather than applying data pre-processing on-board the satellite. Enhanced sensing techniques that generate more science data return could be used and access to data during flight could be faster. Results of on-going activities will be presented, comprising PPM laser communications and advanced tracking concepts. An overview will be given of the system concept for an integrated RF-optical TT&C transponder. Results will be shown from hardware tests on communications performance in inter-island test campaigns.     

Integrated RF-optical TT&C for interplanetary telecomms

Science return and high bandwidth communications are one of the key issues to support the foreseen endeavours on next generation missions [J.L. Gerner, Telemetry, tracking and command of satellites—a perspective, TT&C 2004 Workshop, 7–9 September 2004]. Interplanetary telecommunication systems are required that support the foreseen endeavours. Given the same constraints in terms of mass, power and volume a laser communications terminal can offer an increase in telemetry bandwidth over classical RF technology allowing for a variety of new options, specifically to missions that require large distances, such as to the Moon, to liberation points L1 and L2, ultimately aiming at deep space missions. An increase in telemetry data rate allows the mission to consider the processing of raw scientific data to take place on ground, making use of latest technology further developed during the cruise phase of the probe, rather than applying data pre-processing on-board the satellite. Enhanced sensing techniques that generate more science data return could be used and access to data during flight could be faster. Results of on-going activities will be presented, comprising PPM laser communications and advanced tracking concepts. An overview will be given of the system concept for an integrated RF-optical TT&C transponder. Results will be shown from hardware tests on communications performance in inter-island test campaigns.     

Microgravity research and user support in the Space Station era: The Microgravity User Support Centre

Future space systems, such as Columbus, the planned European contribution to the International Space Station, offer ample possibilities for microgravity research and application. These new opportunities require adequate user support on ground and novel operational concepts in order to ensure an effective utilization. Extensive experience in microgravity user support has been accumulated at DFVLR during the past Spacelab 1 and D1 missions. Based on this work, a Microgravity User Support Centre (MUSC) has been built and is active for the forthcoming EURECA-A1 and D2 missions, to form an integrated support centre for the disciplines life sciences and material sciences in the Space Station era. The objective of the user support at MUSC is to achieve:

• easy access to space experiments for scientific and commercial users,

• efficient preparation of experiments,

• optimum use of valuable microgravity experimentation time,

• cost reduction by concentration of experience.

This is implemented by embedding the MUSC in an active scientific environment in both disciplines, such that users can share the experience gained by professional personnel. In this way, the Space Station system is operated along the lines established on ground for the utilization of large international research facilities, such as accelerators or astronomical observatories. In addition, concepts are developed to apply advanced telescience principles for Space Station operations.     

对我国遥测技术发展的思考

近半个世纪 ,我国遥测技术的发展令人骄傲 ,它为我国“两弹一星”等重大试验的成功立下了不朽功勋 ;进入上世纪 90年代以来 ,它在规模、体制、频段等诸多方面又上了一个新台阶。进入新世纪以后 ,面临世界遥测技术发展的挑战和我国航天、导弹及常规兵器新型号试验的新需求 ,我国遥测技术应着重深入研究和重点发展空间数据系统、综合基带设备、低仰角跟踪技术、外弹道测量、多目标综合测量、机载遥测系统、遥外测综合跟踪技术和数字化检前记录等设备和技术。     

Using Spacelab as a precursor of science operations for the Space Station

For more than 15 years, Spacelab, has provided a laboratory in space for an international array of experiments, facilities, and experimenters. In addition to continuing this important work, Spacelab is now serving as a crucial stepping-stone to the improved science, improved operations, and rapid access to space that will characterize International Space Station. In the Space Station era, science operations will depend primarily on distributed/remote operations that will allow investigators to direct science activities from their universities, facilities, or home bases. Spacelab missions are a crucial part of preparing for these activities, having been used to test, prove, and refine remote operations over several missions. The knowledge gained from preparing these Missions is also playing a crucial role in reducing the time required to put an experiment into orbit, from revolutionizing the processes involved to testing the hardware needed for these more advanced operations. This paper discusses the role of the Spacelab program and the NASA Marshall Space Flight Center- (MSFC-) managed missions in developing and refining remote operations, new hardware and facilities for use on Space Station, and procedures that dramatically reduce preparation time for flight.     

Return to Venus of the Japanese Venus Climate Orbiter AKATSUKI

Japanese Venus Climate Orbiter/AKATSUKI was proposed in 2001 with strong support by international Venus science community and approved as an ISAS (The Institute of Space and Astronautical Science) mission soon after the proposal. The mission life we expected was more than two Earth years in Venus orbit. AKATSUKI was successfully launched at 06:58:22JST on May 21, 2010, by H-IIA F17. After the separation from H-IIA, the telemetry from AKATSUKI was normally detected by DSN Goldstone station (10:00JST) and the solar cell paddles’ deployment was confirmed. After a successful cruise, the malfunction happened on the propulsion system during the Venus orbit insertion (VOI) on Dec. 7, 2010. The engine shut down before the planned reduction in speed to achieve. The spacecraft did not enter the Venus orbit but entered an orbit around the Sun with a period of 203 days. Most of the fuel still had remained, but the orbital maneuvering engine was found to be broken and unusable. However, we have found an alternate way of achieving orbit by using only the reaction control system (RSC). We had adopted the alternate way for orbital maneuver and three minor maneuvers in Nov. 2011 were successfully done so that AKATSUKI would meet Venus in 2015. We are considering several scenarios for VOI using only RCS.     

Concept study on Deep Space Orbit Transfer Vehicle

In this paper, the concept of Orbit Transfer Vehicle for Deep Space Exploration (Deep Space OTV) is proposed, and its effectiveness and feasibility are discussed. Basic concept is the separation of two functions required for the deep space exploration, the transportation to the destination, and the exploration at the destination. Deep Space OTV is a spacecraft specialized for the transportation to the deep space destination. It is an expendable spacecraft propelled by solar electric propulsion. The payload of Deep Space OTV is Explorer, which is a spacecraft specialized for the exploration at the deep space destination. The effectiveness of the concept is discussed qualitatively, focused on the merits of the separations of two functions. The feasibility of Deep Space OTV is discussed based on the conceptual design of the spacecraft and its applicability to deep space missions. Several deep space missions are modeled and the payload capacity of Deep Space OTV is estimated. The missions include Asteroid rendezvous, Mars orbiter, Lunar lander, and so on.     

Concept study on Deep Space Orbit Transfer Vehicle

In this paper, the concept of Orbit Transfer Vehicle for Deep Space Exploration (Deep Space OTV) is proposed, and its effectiveness and feasibility are discussed. Basic concept is the separation of two functions required for the deep space exploration, the transportation to the destination, and the exploration at the destination. Deep Space OTV is a spacecraft specialized for the transportation to the deep space destination. It is an expendable spacecraft propelled by solar electric propulsion. The payload of Deep Space OTV is Explorer, which is a spacecraft specialized for the exploration at the deep space destination. The effectiveness of the concept is discussed qualitatively, focused on the merits of the separations of two functions. The feasibility of Deep Space OTV is discussed based on the conceptual design of the spacecraft and its applicability to deep space missions. Several deep space missions are modeled and the payload capacity of Deep Space OTV is estimated. The missions include Asteroid rendezvous, Mars orbiter, Lunar lander, and so on.     

A systematic review of the Space technology transfer literature: Research synthesis and emerging gaps

In order to justify high expenditure during this period of financial crisis, Space Agencies have attempted to increase the returns on their investments in Space missions by encouraging the commercial use of advanced technologies. The development of a technology transfer process from Space to Earth not only benefits the Aerospace industry but also the network of national companies. Technology transfer has been shown to stimulate innovation in business and commerce, support economic growth and provide a return on public investment in research and development (R&D). The aim of this paper is to systematically review the Space technology transfer literature and to suggest directions for future research. The range of research and studies in the literature on this topic requires a systematic review to summarize the results in an unbiased and balanced manner and to interpret these in a way that highlights the research gaps. This article presents an overview of the dominant thinking (explicit in selected articles from 1995 to present), indicating the problems of analysis, research gaps and a future research program.     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

Distributed telemetry & telecommand for future sunsat missions

This paper will describe the conceptional design of a telemetry and telecommand system to be employed on the next generation SUNSAT microsatellite. The performance of the centralized, time division multiplexed telemetry system used on SUNSAT I can be optimized in terms of size, flexibility and bandwidth utilization. Therefore a method will be presented to implement a reliable, decentralized telemetry and telecommand (T&T) system based on experience gained from SUNSAT 1 and conforming to the Consultative Committee for Space Data Systems recommendations. Controller Area Network technology will be evaluated as a possible solution to realize a robust, multi-master and fault-tolerant T&T system. The expected performance and system improvements of the new T&T system will be compared to the current system used on SUNSAT 1.     

遥测装备智能运维系统的研究与工程化实现

随着航天发射和在轨航天器管理任务的不断增加，为支撑各类测控需求，遥测站数量越来越多，测控系统越来越复杂。为了从整体降低对遥测任务及遥测装备的运维管理成本，提升运维信息的应用能力，为各类角色用户提供有效全面的信息支撑，需要建立体系化的遥测装备智能运维系统。构建多级智能化运维体系，通过现代化信息感知和传输技术实现装备信息的多维度快速获取、感知和汇聚，全局性掌控战斗资源，建设运维中心及信息处理平台完成数据的智能融合处理，通过对各装备、各时段数据的比较，关联挖掘信息，深层次利用运维数据，实现资源全景展示、装备状态监视与智能维护、运行效能评估、态势分析与预测等能力，为遥测资源和战斗力部署调度提供直接全面的决策支撑。     

前馈复合控制在提高遥测跟踪性能中的应用

由于Ka频段遥测设备天线波束较窄,存在高速飞行目标跟踪困难的问题,通过对遥测设备跟踪需求分析,研究了前馈复合控制在遥测跟踪中的应用,计算出前馈复合控制中开环增益的合理取值,改善了遥测设备跟踪高速飞行Ka频段目标时跟踪迟滞情况,缩短了捕获目标需要的时间,提高了设备成功捕获、平稳跟踪目标的能力.     

Feasibility study of astronaut standardized career dose limits in LEO and the outlook for BLEO

Cosmic Study Group SG 3.19/1.10 was established in February 2013 under the aegis of the International Academy of Astronautics to consider and compare the dose limits adopted by various space agencies for astronauts in Low Earth Orbit. A preliminary definition of the limits that might later be adopted by crews exploring Beyond Low Earth Orbit was, in addition, to be made. The present paper presents preliminary results of the study reported at a Symposium held in Turin by the Academy in July 2013. First, an account is provided of exposure limits assigned by various partner space agencies to those of their astronauts that work aboard the International Space Station. Then, gaps in the scientific and technical information required to safely implement human missions beyond the shielding provided by the geomagnetic field (to the Moon, Mars and beyond) are identified. Among many recommendations for actions to mitigate the health risks potentially posed to personnel Beyond Low Earth Orbit is the development of a preliminary concept for a Human Space Awareness System to: provide for crewed missions the means of prompt onboard detection of the ambient arrival of hazardous particles; develop a strategy for the implementation of onboard responses to hazardous radiation levels; support modeling/model validation that would enable reliable predictions to be made of the arrival of hazardous radiation at a distant spacecraft; provide for the timely transmission of particle alerts to a distant crewed vehicle at an emergency frequency using suitably located support spacecraft. Implementation of the various recommendations of the study can be realized based on a two pronged strategy whereby Space Agencies/Space Companies/Private Entrepreneurial Organizations etc. address the mastering of required key technologies (e.g. fast transportation; customized spacecraft design) while the International Academy of Astronautics, in a role of handling global international co-operation, organizes complementary studies aimed at harnessing the strengths and facilities of emerging nations in investigating/solving related problems (e.g. advanced space radiation modeling/model validation; predicting the arrivals of Solar Energetic Particles and shocks at a distant spacecraft). Ongoing progress in pursuing these complementary parallel programs could be jointly reviewed bi-annually by the Space Agencies and the International Academy of Astronautics so as to maintain momentum and direction in globally progressing towards feasible human exploration of interplanetary space.     

Economic benefits of the OTV program

A new upper stage for the Shuttle called Orbiter Transfer Vehicle (OTV) is planned by the National Aeronautics and Space Administration (NASA) for a broad range of missions including transfer of very large spacecraft, unmanned and manned servicing at Geosynchronous orbit (GEO). Leading OTV configurations use 13 to 34 tonnes of cryogenic propellants in vehicles based on the existing Centaur or new designs. These OTVs can deliver to Geosynchronous orbit more than double the payload possible with the solid propellant Intertial Upper Stage (IUS), which is currently being developed. This high performance reduces the number of shuttle launches required to deliver a given total mass of payloads. After delivery of current size spacecraft, OTV could be returned to the Orbiter for reuse, saving the cost of building a new stage. OTV performance and flexibility will create the opportunity for the next generation of spacecraft such as Geostationary Platform. In these three ways, the high-performance OTV will provide economic benefits to Space Transportation Systems.     

The origin of the smaller, faster, cheaper approach in NASA’s solar system exploration program

The current emphasis on smaller, faster, cheaper (SFC) spacecraft in NASA’s solar system exploration program is the product of a number of interacting – even interdependent – factors. The SFC concept as applied to NASA’s solar system exploration program can be viewed as the vector sum of (1) the space science community’s desire for more frequent planetary missions to plug the data gaps, educate the next generation of scientists, provide missions to targets of opportunity, and enable programmatic flexibility in times of budgetary crisis; (2) the poor publicity garnered by NASA in the early 1990s and the resultant atmosphere of public criticism (creating an opportunity for reform); (3) The Strategic Defense Initiative Organization’s and the National Space Council community’s desire to advance the Space Exploration Initiative and their perception that the NASA culture at the time represented a barrier to the effective pursuit of space exploration; (4) the effective leadership of NASA Administrator Daniel Goldin; and (5) the diminishing budget profile for space sciences in the early 1990s. This paper provides a summary of the origin of the smaller, faster, cheaper approach in the planetary program. A more through understanding of the history behind this policy will enable analysts to assess more accurately the relative successes and failures of NASA’s new approach to solar system exploration.     

Space life and biomedical sciences in support of the global exploration roadmap and societal development

The human exploration of space is pushing the boundaries of what is technically feasible. The space industry is preparing for the New Space era, the momentum for which will emanate from the commercial human spaceflight sector, and will be buttressed by international solar system exploration endeavours. With many distinctive technical challenges to be overcome, human spaceflight requires that numerous biological and physical systems be examined under exceptional circumstances for progress to be made. To effectively tackle such an undertaking significant intra- and international coordination and collaboration is required. Space life and biomedical science research and development (R & D) will support the Global Exploration Roadmap (GER) by enabling humans to ‘endure’ the extreme activity that is long duration human spaceflight. In so doing the field will discover solutions to some of our most difficult human health issues, and as a consequence benefit society as a whole. This space-specific R&D will drive a significant amount of terrestrial biomedical research and as a result the international community will not only gain benefits in the form of improved healthcare in space and on Earth, but also through the growth of its science base and industry.     

Autonomous aerobraking for low-cost interplanetary missions

Aerobraking has previously been used to reduce the propellant required to deliver an orbiter to its desired final orbit. In principle, aerobraking should be possible around any target planet or moon having sufficient atmosphere to permit atmospheric drag to provide a portion of the mission ΔV, in lieu of supplying all of the required ΔV propulsively. The spacecraft is flown through the upper atmosphere of the target using multiple passes, ensuring that the dynamic pressure and thermal loads remain within the spacecraft's design parameters. NASA has successfully conducted aerobraking operations four times, once at Venus and three times at Mars. While aerobraking reduces the fuel required, it does so at the expense of time (typically 3–6 months), continuous Deep Space Network (DSN) coverage, and a large ground staff. These factors can result in aerobraking being a very expensive operational phase of the mission. However, aerobraking has matured to the point that much of the daily operation could potentially be performed autonomously onboard the spacecraft, thereby reducing the required ground support and attendant aerobraking related costs. To facilitate a lower-risk transition from ground processing to an autonomous capability, the NASA Engineering and Safety Center (NESC) has assembled a team of experts in aerobraking and interplanetary guidance and control to develop a high-fidelity, flight-like simulation. This simulation will be used to demonstrate the overall feasibility while exploring the potential for staff and DSN coverage reductions that autonomous aerobraking might provide. This paper reviews the various elements of autonomous aerobraking and presents an overview of the various models and algorithms that must be transformed from the current ground processing methodology to a flight-like environment. Additionally the high-fidelity flight software test bed, being developed from models used in a recent interplanetary mission, will be summarized.     

The cost benefits of the Spacelab system to scientific investigations and space applications

In the past, one of the major problems in performing scientific investigations in space has been the high cost of developing, integrating, and transporting scientific experiments into space. The limited resources of unmanned spacecraft, coupled with the requirements for completely automated operations, was another factor contributing to the high costs of scientific research in space. In previous space missions after developing, integrating and transporting costly experiments into space and obtaining successful data, the experiment facility and spacecraft have been lost forever, because they could not be returned to earth. The objective of this paper is to present how the utilization of the Spacelab System will result in cost benefits to the scientific community, and significantly reduce the cost of space operations from previous space programs.The following approach was used to quantify the cost benefits of using the Spacelab System to greatly reduce the operational costs of scientific research in space. An analysis was made of the series of activities required to combine individual scientific experiments into an integrated payload that is compatible with the Space Transportation System (STS). These activities, including Shuttle and Spacelab integration, communications and data processing, launch support requirements, and flight operations were analyzed to indicate how this new space system, when compared with previous space systems, will reduce the cost of space research. It will be shown that utilization of the Spacelab modular design, standard payload interfaces, optional Mission Dependent Equipment (MDE), and standard services, such as the Experiment Computer Operating System (ECOS), allow the user many more services than previous programs, at significantly lower costs. In addition, the missions will also be analyzed to relate their cost benefit contributions to space scientific research.The analytical tools that are being developed at MSFC in the form of computer programs that can rapidly analyze experiment to Spacelab interfaces will be discussed to show how these tools allow the Spacelab integrator to economically establish the payload compatibility of a Spacelab mission.The information used in this paper has been assimilated from the actual experience gained in integrating over 50 highly complex, scientific experiments that will fly on the Spacelab first and second missions. In addition, this paper described the work being done at the Marshall Space Flight Center (MSFC) to define the analytical integration tools and techniques required to economically and efficiently integrate a wide variety of Spacelab payloads and missions. The conclusions reached in this study are based on the actual experience gained at MSFC in its roles of Spacelab integration and mission managers for the first three Spacelab missions. The results of this paper will clearly show that the cost benefits of the Spacelab system will greatly reduce the costs and increase the opportunities for scientific investigation from space.