The BOSS and BIOMEX space experiments on the EXPOSE-R2 mission: Endurance of the desert cyanobacterium Chroococcidiopsis under simulated space vacuum,Martian atmosphere,UVC radiation and temperature extremes.

The proposed space experiments BOSS (Biofilm Organisms Surfing Space) and BIOMEX (BIOlogy and Mars experiment) will take place on the space exposure facility EXPOSE-R2 on the International Space Station (ISS), which is set to be launched in 2014. In BOSS the hypothesis to be tested is that microorganisms grown as biofilms, hence embedded in self-produced extracellular polymeric substances, are more tolerant to space and Martian conditions compared to their planktonic counterparts. Various microbial biofilms have been developed including those obtained from the cyanobacterium Chroococcidiopsis isolated from hot and cold deserts. The prime objective of BIOMEX is to evaluate to what extent biomolecules are resistant to, and can maintain their stability under, space and Mars-like conditions; therefore a variety of pigments and cell components are under investigation to establish a biosignature data base; e.g. a Raman spectral library to be used for extraterrestrial life biosignatures. The secondary objective of BIOMEX is to investigate the endurance of extremophiles, focusing on their interactions with Lunar and Martian mineral analogues. Ground-based studies are currently being carried out in the framework of EVTs (Experiment Verification Tests) by exposing selected organisms to space and Martian simulations. Results on a desert strain of Chroococcidiopsis obtained from the first set of EVT, e.g. space vacuum, Mars atmosphere, UVC radiation, temperature cycles and extremes, suggested that dried biofilms exhibited an enhanced survival compared to planktonic lifestyle. Moreover the protection provided by a Martian mineral analogue (S-MRS) to the sub-cellular integrities of Chroococcidiopsis against UVC radiation supports the endurance of this cyanobacterium under extraterrestrial conditions and its relevance in the development of life detection strategies.     

Exploration of Mars in the SPICAM-IR experiment onboard the Mars-Express spacecraft: 2. Nadir observations: Simultaneous observations of water vapor and O2 glow in the Martian atmosphere

The SPICAM experiment onboard the Mars-Express spacecraft includes sounding the Martian atmosphere in the ultra-violet (118–320 nm) and near IR (1–1.7 μm) ranges. The infrared spectrometer operates in the range of 1–1.7 μm with a resolution of 3.5 cm^?1 in the mode of nadir observations and solar and stellar occulations. This paper is devoted to analyzing the basic results of nadir observations of the infra-red SPICAM channel during the first Martian year of the instrument operation: from January 2004 to November 2005. One of the primary goals of SPICAM-IR is water vapor monitoring in the atmosphere of Mars in the band of 1.37 μm and ozone abundance determination from the day-time airglow of molecular oxygen O₂(a ¹Δ_g) in the band of 1.27 μm. Simultaneous measurements of these minor constituents of the planet are necessary for understanding photochemical processes in the Martian atmosphere. The degree of their anticorrelation and a comparison with the results of photochemical modeling of the atmosphere will contribute to our knowledge of the Martian atmosphere stability.     

低太阳高度角月球影像的陨石坑自动提取方法

陨石坑是月球表面最重要的地形特征,对于研究月球的地质状况和地理状况具有重要的意义。充分考虑低太阳高度角影像中陨石坑特殊的拓扑结构和灰度分布特点,提出一种新的基于光照方向的陨石坑边缘连接方法,综合边缘线判别、边缘线组合、陨石坑判别的陨石坑筛选三步法,形成一套完整的低太阳高度角月球影像陨石坑自动提取流程。用低太阳高度角Lunar Orbit影像进行实验,检测成功率达到了73.9%,表明该方法对于低太阳高度角月球影像陨石坑的自动提取有较好的适用性。     

Radiobiological risk and single event effects during manned space flights

Radiation hazard during previous manned space flights was not a critical problem as seen from monitoring on board MIR and the SHUTTLE. Future Martian and Lunar missions as well as flights on inclined or high altitude orbits around the Earth can be exposed to a large radiobiological risk and critical reliability losses can be expected, due to Single Event Effects on VLSI devices.

The mains characteristics of these hazards and some counter-measures to be provided for are given.     

Scientific investigations at a lunar base.

Scientific investigations to be carried out at a lunar base can have significant impact on the location, extent, and complexity of lunar surface facilities. Among the potential research activities to be carried out are: (1) Lunar Science: Studies of the origin and history of the Moon and early solar system, based on lunar field investigations, operation of networks of seismic and other instruments, and collection and analysis of materials; (2) Space Plasma Physics: Studies of the time variation of the charged particles of the solar wind, solar flares and cosmic rays that impact the Moon as it moves in and out of the magnetotail of the Earth; (3) Astronomy: Utilizing the lunar environment and stability of the surface to emplace arrays of astronomical instruments across the electromagnetic spectrum to improve spectral and spatial resolution by several orders of magnitude beyond the Hubble Space Telescope and other space observatories; (4) Fundamental physics and chemistry: Research that takes advantage of the lunar environment, such as high vacuum, low magnetic field, and thermal properties to carry out new investigations in chemistry and physics. This includes material sciences and applications; (5) Life Sciences: Experiments, such as those that require extreme isolation, highly sterile conditions, or very low natural background of organic materials may be possible; and (6) Lunar environmental science: Because many of the experiments proposed for the lunar surface depend on the special environment of the Moon, it will be necessary to understand the mechanisms that are active and which determine the major aspects of that environment, particularly the maintenance of high-vacuum conditions. From a large range of experiments, investigations and facilities that have been suggested, three specific classes of investigations are described in greater detail to show how site selection and base complexity may be affected: (1) Extended geological investigation of a complex region up to 250 kilometers from the base requires long range mobility, with transportable life support systems and laboratory facilities for the analysis of rocks and soil. Selection of an optimum base site would depend heavily on an evaluation of the degree to which science objectives could be met. These objectives could include lunar cratering, volcanism, resource surveys or other investigations; (2) An astronomical observatory initially instrumented with a VLF radio telescope, but later expanding to include other instruments, requires site preparation capability, "line shack" life support systems, instrument maintenance and storage facilities, and sortie mode transportation. A site perpetually shielded from Earth is optimum for the advanced stages of a lunar observatory; (3) an experimental physics laboratory conducting studies requiring high vacuum facilities and heavily instrumented experiments, is not highly dependent on lunar location, but will require much more flexibility in experiment operation and EVA capability, and more sophisticated instrument maintenance and fabrication facilities.     

Recent advances in lunar base simulation

This article reports about the results of the latest computer runs of a lunar base simulation model. The lunar base consists of 20 facilities for lunar mining, processing and fabrication. The infrastructure includes solar and nuclear power plants, a central workshop, habitat and farm. Lunar products can be used for construction of solar power systems (SPS) or other spacecraft at several space locations. The simulation model evaluates the mass, energy and manpower flows between the elements of the system as well as system cost and cost of products on an annual basis for a given operational period. The 1983 standard model run over a fifty-years life cycle (beginning about the year 2000) was accomplished for a mean annual production volume of 78 180 Mg of hardware products for export resulting in average specific manufacturing cost of 8.4 $/kg and total annual cost of 1.25 billion dollars during the life cycle. The reference space transportation system uses LOX/LH₂ propulsion for which at the average 210 500 Mg LOX per year is produced on the moon. The sensitivity analysis indicates the importance of bootstrapping as well as the influence of market size, space transportation cost and specific resources demand on the mean lunar manufacturing cost. The option using lunar resources turns out to be quite attractive from the economical viewpoint. Systems analysis by this lunar base model and further trade-offs will be a useful tool to confirm this.     

基于形状的火卫一重力场研究

介绍基于形状对不规则小天体重力场建模的原理和方法,并通过解析法和数值法对火卫一的重力场进行正演建模。相比之前的重力场模型,基于解析算法获得的17阶次球谐展开形式重力场模型,在分辨率上有显著提高。进一步结合火卫一动力学参数,分析了火卫一表面加速度。结果显示,火卫一因其轨道十分接近火星,导致表面离心力和潮汐力十分显著,在某些区域与自引力相当,造成火卫一的特殊表面重力环境。这些结果可为未来的火卫一探测和科学研究提供基本输入物理场模型,也可为其他小天体探测中的类似问题提供方法参考。     

基于SVM和"嫦娥一号"数据的月球表面亮温分布

月球表面的微波辐射亮度温度分布与月表物质的物理化学和地理分布特性密切相关.为了分析月球表面微波辐射亮温的分布特点,利用支持向量机(SVM)方法对嫦娥一号(CE-1)绕月卫星搭载的微波辐射计获得的2C级亮温数据建立回归分析模型,并利用粒子群算法优化SVM回归模型,建立了月球表面不同地理位置的4个频率通道(3GHz,7.8GHz,19.35GHz,37GHz)的微波辐射亮温与时间的关系,获得了这4个频率的微波辐射亮温在月表很窄时间段的全球分布,因而显示出了更多的细节特征.最后对这些特征进行了描述并对影响月球表面亮温的因素进行了讨论.     

月尘对太阳电池的遮挡效应研究

月尘的沉积对月面探测器太阳电池系统是一种严重的威胁。为了对月尘沉积所引起的太阳电池性能衰减进行预估,文章建立了一种月尘遮挡模型,可用于月尘遮挡效应的研究,并可作为月球探测器防尘设计的参考工具。     

Regional and seasonal limitations for Mars intrinsic ecopoiesis

Mars ecopoiesis is a human controlled process consisting in changes needed for anaerobic life to be established on planet surface. The daily minimum temperature on present day Mars is well below the water freezing point, due to the low thermal inertia of the surface. A simple time-dependent model to evaluate the ground temperature is developed here. It takes into account the incident solar radiation, the greenhouse effect and surface thermal inertia. The model is applied to two modified Martian atmospheres. Increasing surface thermal inertia seems to be necessary for Mars intrinsic ecopoiesis. This can be done either by removing the regolith layer covering the bedrock or by regolith compression. The Northern hemisphere of the terraformed Mars appears to be more hospitable than the Southern hemisphere, because the amplitude of the daily temperature excursion there is lower and the freezing temperature appears at higher latitudes. A regional (and seasonal) terraforming of Mars is suggested.     

火星太阳电池翼除尘方法综述

“萤火一号”火星探测器即将发射升空,标志着我国火星探测计划实施的开始。然而,火星尘埃在范德华力和静电力的作用下积聚在太阳电池翼的表面,使其转换效率下降,影响火星探测器的寿命。因此,开展火星太阳电池翼除尘技术的研究是非常有意义的。文章主要介绍了火星太阳电池翼的除尘方法,特别是目前最受关注的电帘除尘方法,并对其基本结构、除尘原理、除尘效率和透光性做了详细的描述,对开展火星太阳电池翼除尘技术的研究具有一定的参考作用。     

进入火星大气的高温真实气体效应与气动加热研究

针对火星和地球大气分子热力学和化学行为的差异性，采用理论分析和数值模拟两种手段，研究探测器进入过程高超声速流动的分子振动激发、离解反应及热力学和化学非平衡等真实气体效应，获得不同气体模型条件下的高超声速气动加热规律，探究引起地火差异的根本原因。分析认为，探测器进入火星大气层的稀薄气体效应明显；激波层内发生CO 2气体为主的大规模离解，在极高温环境下O 2和CO也将离解；沿进入轨道的高超声速流动基本处于化学非平衡但热力学平衡状态；激波层内能量储存和分配模式因分子振动激发和化学反应而改变，分子振动激发会增强气动加热量，但均介于化学反应模型的完全非催化和完全催化壁结果之间；相同来流条件下CO 2介质高超声速气动加热强于空气介质，但真实的火星进入热载荷因大气稀薄而弱于地球再入环境。相关研究为我国未来火星探测器热防护系统设计提供技术支持。     

A systems and concurrent engineering framework for the integrated development of space products

This paper proposes a framework for the integrated development of space products. The framework is called ‘total view framework’ because it provides the total set of product, process and organisation elements and their interactions from the outset in the development process. It uses systems engineering (SE) and concurrent engineering (CE) in an integrated manner, as part of the same framework. The framework extends the application of the SE process to life cycle processes and their performing organisations and applies CE at all levels of the hierarchical product breakdown structure. The ‘total view framework’ is supported by a method, called ‘concurrent structured analysis method’, that consists of the three analysis processes: requirements, functional and physical. These processes mirror the bulk of the SE process and are applied concurrently to product, process and organisations. The outputs of the method are requirements, functional attributes, physical attributes and the interactions among them. These outputs are then analysed using a clustering algorithm and a complexity metric based on cohesion and coupling shows the clustering effects.     

Statistical Relationships between Solar, Interplanetary, and Geomagnetospheric Disturbances, 1976–2000

Within the framework of the Space Weather program, 25-year data sets for solar X-ray observations, measurements of plasma and magnetic field parameters in the solar wind, and D _st index variations are analyzed to reveal the factors that have had the greatest influence on the development of magnetospheric storms. The correlation between solar flares and magnetic storms practically does not exceed a level of correlation for random processes. In particular, no relation was found between the importance of solar flares and the minimum of the D _st index for storms that could be connected with considered flares by their time delay. The coronal mass ejections (CME; data on these phenomena cover a small part of the interval) result in storms with D _st < –60 nT only in half of the cases. The most geoeffective interplanetary phenomena are the magnetic clouds (MC), which many believe to be interplanetary manifestations of CMEs, and compressions in the region of interaction of slow and fast streams in the solar wind (the so-called Corotating Interaction Region, CIR). They correspond to about two-thirds of all observed magnetic storms. For storms with –100 < D _st < –60 nT, the frequencies of storms from MC and CIR being approximately equal. For strong storms with D _st < – 100 nT, the fraction of storms from MC is considerably higher. The problems of reliable prediction of geomagnetic disturbances from observations of the Sun and conditions in interplanetary space are discussed.     

Statistical investigation of heliospheric conditions resulting in magnetic storms

Time behavior of the solar wind and interplanetary magnetic field parameters is investigated for 623 magnetic storms of the OMNI database for the period 1976–2000. The analysis is carried out by the superposed epoch technique (the magnetic storm onset time is taken to be the beginning of an epoch) for five various categories of storms induced by various types of solar wind: CIR (121 storms), Sheath (22 storms), MC (113 storms), and “uncertain type” (367 storms). In total, the analysis conducted for “all storms” included 623 storms. The obtained data, on one hand, confirm the results obtained earlier without selecting the intervals according to the solar wind types, and, on the other hand, they indicate the existence of distinctions in the time variation of parameters for various types of solar wind. Though the lowest values of the B _z-component of IMF are observed in the MC, the lowest values of the D _st-index are achieved in the Sheath. Thus, the strongest magnetic storms are induced, on average, during the Sheath rather than during the MC body passage, probably owing to higher pressure in the Sheath. Higher values of nkT, T/T _exp, and β parameters are observed in the CIR and Sheath and lower ones in the MC, which corresponds to the physical essence of these solar wind types.     

Net electric power of concentrating solar mirror systems for application in space as a function of the distance to the sun

The use of solar radiation by means of concentrating solar mirror systems, such as parabolic and spheric configurations, mainly is an engineering problem. A decisive characteristic for the optimisation of a complete system with turboelectric power conversion is the thermal cycle applied. Besides the Carnot process, here taken up into the study as an ideal comparative process, suitable processes for the technological realisation are the Brayton process and the Rankine process. The Brayton process is a typical gas turbine process using only the gaseous phase. The Rankine process is a steam engine process using liquid and gaseous phase.The work in hand shows how such solar systems with turboelectric conversion are optimised with respect to their specific weight (kg/kW_e) and how the distance to the sun as well as technological data enter into the analysis.As expected, the Carnot cycle as an ideal comparative process for both types of systems shows the best results for the optimum specific mass of the system. Regarding the real processes, the Rankine cycle shows more favourable characteristics than the Brayton cycle. The difference of the specific masses of the real processes mainly results from the different thermal conditions at the radiator.The influence of the distance to the sun is as expected. The nearer to the sun the solar power system operates, the better is the optimum specific mass of the system. For distances to the sun between 0.3 and 1.0 AU the spheric system shows a better behaviour than the parabolic system. For distances to the sun greater than 2.0 AU the parabolic system shows better behaviour of the specific weight. In the region between 1 and 2 AU the better optimum specific mass of the system belongs to the technological data used in the analysis.     

模拟月壤研究及其在月球探测工程中的应用

在月壤化学成分、物理力学性质等方面研究结果的基础上,文章对国内外模拟月壤的研究进展进行了综合分析,重点阐述了服务于我国嫦娥探月工程的科学探测仪器标定、着陆器组合缓冲性能试验、巡视器移动试验、月表采样试验等研制任务的模拟月壤研究成果及应用情况,包括模拟月壤原料选取及制备工艺,模拟月壤试验场的铺设方法等,结合载人登月等任务需求提出了未来研究工作的发展建议。     

The Martian and extraterrestrial UV radiation environment. Part II: further considerations on materials and design criteria for artificial ecosystems.

Ultraviolet radiation is an important natural physical influence on organism function and ecosystem interactions. The UV radiation fluxes in extraterrestrial environments are substantially different from those experienced on Earth. On Mars, the moon and in Earth orbit they are more biologically detrimental than on Earth. Based on previously presented fluxes and biologically weighted irradiances, this paper considers in more detail measures to mitigate UV radiation damage and methods to modify extraterrestrial UV radiation environments in artificial ecosystems that use natural sunlight. The transmission characteristics of a Martian material that will mimic the terrestrial UV radiation environment are presented. Transmissivity characteristics of other Martian and lunar materials are described. Manufacturing processes for the production of plastics and glass on the lunar and Martian surface are presented with special emphasis on photobiological requirements. Novel UV absorbing configurations are suggested.     

火星表面热辐射环境模拟

为了对火星表面的热辐射环境进行模拟,以辅助火星探测等任务,建立了火星大气的一维模型和土壤的一维导热模型,并与NASA的一维火星大气辐射程序相结合,得到了一套整体模拟系统。模拟获得了火星地表温度及接收到的可见光、红外辐射热流密度,分析了季节、纬度、尘暴、云层的变化对地表温度和所受太阳辐射造成的影响。模拟结果表明,纬度和季节的变化影响着太阳高度角和日照时长等因素,进而对可见光辐射造成显著影响;尘埃光学厚度的增加会削弱可见光辐射并增强红外辐射,云层光学性质的改变造成的影响与之相似但较小;四者的改变都会对地表的温度及接收到的太阳辐射热流密度造成不同程度的影响。