基于遗传神经网络的飞行载荷参数识别

针对飞行载荷参数识别问题,结合典型机动动作,提出一种优化改进的BP神经网络模型。模型采用留出方法和遗传算法对BP神经网络的设置参数进行优化,利用最优设置参数训练得到飞行载荷与飞行参数的BP神经网络模型。在半滚机动下,通过利用飞行参数识别某一部位弯矩并与未优化BP神经网络对比,表明优化改进的BP神经网络模型对飞行载荷参数识别是一种可行且精度高的方法。     

基于GA-ELM的飞行载荷参数识别

针对用复杂飞行数据识别飞行载荷时的精度低、速度慢等问题,提出一种结合遗传算法(GA)和极限学习机(ELM)的GA-ELM模型。该模型使用ELM神经网络作为计算核心,用遗传算法产生ELM网络输入层到隐含层的权值矩阵和隐含层偏移量;用GA-ELM模型对飞行数据进行识别,并与BP神经网络和原始ELM神经网络的识别结果进行对比。结果表明:GA-ELM模型是一种有效且高精度的飞行载荷参数识别方法。     

基于自适应Kalman滤波的改进PSO算法

针对基于Kalman滤波的PSO算法在设计与应用过程中存在的不足,提出了基于自适应Kalman滤波的改进PSO算法。利用粒子群状态空间Markov链模型,建立粒子群系统状态方程;采用粒子的速度和位置作为观测量,构建观测方程;引入记忆衰减因子动态调整Kalman滤波模型参数及噪声方差阵,降低模型误差,提高粒子的位置估计精度。仿真实验表明:改进的PSO算法无论在优化精度、收敛速度,还是在稳定性方面都有很大的改进和提高,这就有效避免了粒子的"早熟"收敛问题;尤其在处理复杂多峰问题上,改进算法表现出很明显的优越性。     

基于改进联邦Kalman滤波的组合校准方法研究

联邦滤波器广泛应用于多传感器信息融合领域,联邦滤波中的信息分配原则影响滤波精度.针对联邦Kalman滤波器进行改进,采用基于估计协方差阵奇异值动态确定信息分配系数.对子滤波器进行重置时,采用新的重置方法,保证了子滤波器误差协方差阵的对称性,确保Kalman滤波器的一致收敛稳定性.新的联邦滤波算法允许每个状态分量拥有不同的动态信息分配因子,从而改进了联邦滤波信息融合的精度.设计了SINS/GPS/电子罗盘组合导航系统,仿真结果说明,与传统联邦滤波算法相比,改进的联邦滤波器估计精度得到了提高,可以更好地对SINS误差进行校准,提高系统的精度.     

一种改进的高超声速滑翔目标跟踪方法

针对临近空间高超声速滑翔目标跟踪问题，提出一种基于反向传播神经网络修正改进迭代扩展卡尔曼滤波(Back Propagation Neural Network-aided Improved Iterative Extended Kalman Filter, BP-IIEKF)的目标轨迹跟踪方法。在雷达站坐标系下建立目标运动模型和量测模型。引入阻尼因子修正IEKF算法中的协方差预测矩阵，并定义算法的代价函数，给出迭代终止条件，保证了算法收敛精度，减小状态的观测更新误差，提高了目标状态估计精度。利用BP神经网络修正滤波结果，补偿系统滤波误差，进一步提高了跟踪精度。仿真结果表明所提算法对高超声速滑翔目标具有更高的跟踪精度。     

带BP神经网络的卡尔曼滤波算法在GPS/SINS组合导航系统中的应用

针对带权值调整的Kalman滤波器,运用L-M的BP算法,将BP神经网络嵌入该滤波器中,与BP神经网络滤波器相比,减小了层数,提高了网络训练速度及精度。以GPS/SINS组合导航系统为例进行了仿真,结果既能抑制滤波发散,又能提高滤波精度。     

自适应扩展增量 Kalman 滤波方法

基于扩展增量Kalman滤波方法(EIKF)和自适应增量Kalman滤波(AIKF),建立自适应扩展增量Kalman(AEIKF)模型及其分析方法,给出递推算法.在许多实际情况(如深空探测),由于环境因素的影响、测量设备的不稳定性等原因,量测方程往往存在未知的系统误差,并且模型参数也具有不确定性,结果导致较大的Kalman滤波误差,影响滤波的收敛性.提出的AEIKF方法能够成功消除这种未知的系统误差,并能够实时估计变化的噪声统计量,提高Kalman滤波精度.该方法计算简单,便于工程应用.      

基于IGA算法优化的RBF神经网络应用

提出了一种基于改进遗传算法(Improved Genetic Algorithm,IGA)优化的径向基函数(RBF)神经网络,将实数编码的自适应交叉和变异操作的遗传算法与梯度下降法混合交互运算,作为RBF网络的学习算法,并应用于非线性函数的逼近和导弹故障模式的识别问题。仿真结果表明,基于IGA算法的RBF神经网络不仅结构简单,而且具有较好的网络泛化性能。     

复合材料板壳任意位置处载荷识别

提出了一种受载单元判别法,根据遗传算法生成的染色体所对应的载荷作用点的横、纵坐标和每个单元四条边间的几何关系,判断出集中载荷作用的单元,再根据力的等效分配原则,把载荷等效分配到所在单元的节点上,进而基于有限元分析和遗传算法自身优越的全局搜索能力实现作用于复合材料结构网格节点或单元内部任意位置处的载荷识别.与现有的神经网络识别法和有限元反分析法相比,该方法具有能够识别非网格节点处的载荷的优点,且仿真算例表明其识别精度更高.      

周向收敛型动压式指尖密封的结构优化及其动态性能仿真

周向收敛型动压式指尖密封是一种可用于航空发动机的非接触式柔性气封.根据周向收敛型动压式指尖密封的工作性能要求,提出密封性能优化数学模型.采用人工神经网络和遗传算法相结合的优化方法,通过建立反向传播(BP)神经网络确定设计变量与目标函数之间的隐含关系,再利用遗传算法对周向收敛型动压式指尖密封进行结构参数优化,获得了性能较...     

基于飞机油箱模型形状特征油量测量切片步长选择方法研究

 在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明：该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

二维翼段颤振的μ控制

 采用超声电机作为作动器来实现含控制面的翼段颤振鲁棒抑制。针对作者设计的二维翼段颤振主动抑制系统，通过理论与实验相结合的方法，建立了考虑沉浮方向阻尼和作动器模型参数不确定性的控制系统模型，设计了μ控制器，并对控制器做了降阶处理。数值仿真和风洞试验表明，μ控制器可有效地抑制颤振的发生，将颤振临界速度提高23.4%。相对于H_∞控制器，μ控制器的控制效果和鲁棒性更好。     

Abnormal Shape Mould Winding

为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。     

基于H∞性能指标的质量矩拦截弹鲁棒控制

 以所建立的质量矩拦截弹数学模型为基础，利用微分几何的反馈线性化理论，得到一个解耦线性系统，考虑到拦截弹的鲁棒性要求和3个滑块的协调控制问题，提出采用双回路的设计方法，内回路采用线性二次调节器（LQR），外回路采用考虑混合灵敏度问题的H_∞控制设计。仿真结果证明了该方法动态性能满足设计要求，同时对系统参数的不确定性具有较强的鲁棒性。     

航天器返回地球的气动特性综述

航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.