The GRASP telescope

The GRASP mission Gamma-Ray Astronomy with Spectroscopy and Positioning addresses the scientific goals of fine spectroscopy with imaging and accurate positioning of gamma-ray sources, an unexplored area within gamma-ray astronomy. The assessment of GRASP as a future space astronomy mission in the mid-1990s has led to the design of the instrument outlined in this article. Thus GRASP is a third generation gamma-ray telescope and is designed to operate as a high quality spectral imager in the mid-1990s, when, following the GRO, SIGMA, and GAMMA-1 missions, there will be requirement for a more sophisticated instrument to maintain the momentum of advance in gamma-ray astronomy. The telescope will be capable of locating point sources with a precision of typically 1 arc min, whilst making a fine spectral analysis (E/E 1000) of any gamma-ray line features. The high sensitivity of this instrument and the long (> 2 year) lifetime of the mission will enable a large number ( 1000) of astronomical objects to be studied. The GRASP mission has the potential to move gamma-ray astronomy from an era of basic exploration to one in which detailed and novel measurements can be used to gain a better understanding of many astrophysical problems.     

Comet nucleus sample return: Plans and capabilities

ROSETTA — the Comet Nucleus Sample Return mission — is one of the four Cornerstone missions to which ESA has committed itself in its approved Long-Term Programme Horizon 2000. The mission is currently being studied in collaboration with NASA. The comet-nucleus samples that ROSETTA is to provide will allow us to study some of the most primitive material in the solar system and the physical and chemical processes that marked the beginning of the system 4.6 billion years ago. For ESA, ROSETTA is a new type of mission: one which will return a sample at cryogenic temperature, and where as much effort has to be spent on preparing the laboratory analysis on-ground as has to be invested in preparing the space segment with the sample acquisition and in situ documentation. As part of the preparation for this mission, ESA is now starting to consider Planetary Protection issues.     

Mission aspects of GRASP ESA's prospective gamma-ray astronomy satellite

Mission aspects of the project GRASP (Gamma-Ray Astronomy with Spectroscopy and Positioning) are described as documented in the ESA assessment study at the end of 1986. The goals of this study addressed scientific objectives, technical solutions and feasibility of the mission. Two accommodation studies accompanied the assessment study. Their results show that GRASP can be accommodated on two existing space platforms, EURECA-B and ROBUS, respectively.     

Plans for submillimetre and infrared satellites in Japan

I describe plans for submillimetre and infrared satellites which are now under discussion among Japanese infrared and millimetre astronomers. We propose a submillimetre and/or infrared mission to be launched around 2000 with a main reflector 1–2 m in diameter and cooled down to 50–150 K. This mission, although a small one, will be able to contribute significantly to the advance in submillimetre and infrared astronomy if its role is specified for suitable purposes like surveys.     

THE CLUSTER MISSION: ESA'S SPACEFLEET TO THE MAGNETOSPHERE

During the first half of 1996, the European Space Agency (ESA) will launch a unique flotilla of spacecraft to study the interaction between the solar wind and the Earth's magnetosphere in unprecedented detail. The Cluster mission was first proposed to the Agency in late 1982 and was selected, together with SOHO, as the Solar Terrestrial Science Programme (STSP), the first cornerstone of ESA's Horizon 2000 Programme. It is a complex four-spacecraft mission designed to carry out three-dimensional measurements of the magnetosphere, covering both large- and small-scale phenomena in the sunward and tail regions. The mission is a first for ESA in a number of ways: – the first time that four identical spacecraft have been launched on a single launch vehicle, – the first time that ESA has built spacecraft in true series production and operated them as a single group, – the first time that European scientific institutes have produced a series of up to five instruments with full intercalibration, and – the first launch of the Agency's new heavy launch vehicle Ariane-5. The article gives an overview of this unique mission and the requirements that governed the spacecraft design. It then describes in detail the resulting design and how the particular engineering challenges posed by the series production of four identical spacecraft and sets of scientific instruments were met by the combined efforts of the ESA Project Team, Industry and the experiment teams.     

SOHO: The Solar and Heliospheric Observatory

The Solar and Heliospheric Observatory (SOHO), together with the Cluster mission, constitutes ESA's Solar Terrestrial Science Programme (STSP), the first Cornerstone of the Agency's long-term programme Space Science — Horizon 2000. STSP, which is being developed in a strong collaborative effort with NASA, will allow comprehensive studies to be made of the both the Sun's interior and its outer atmosphere, the acceleration and propagation of the solar wind and its interaction with the Earth. This paper gives a brief overview of one part of STSP, the SOHO mission.     

EUROPEAN NETWORK FOR THE NUMERICAL SIMULATION OF SPACE PLASMAS

The Cluster mission of the European Space Agency (ESA) will allow, for the first time three-dimensional measurements in key regions of the Earth's magnetosphere to be carried out. The European Numerical Simulation Network (ENSN) aims at providing a theoretical support to the mission. We describe the achievements of the ENSN during its first period of activity 1991–1994, during which the network was funded by the European Union. In particular, the ENSN has set up (i) thematic Working Groups on the prime scientific goals of the mission, (ii) a code development Working Group to develop numerical simulation codes specifically adapted to studying magnetospheric boundaries and the corresponding scale mixing, and (iii) software models of Cluster instruments to test in a numerical simulation what the set of four instruments will measure.     

基于GRASP算法的 甲板航空保障作业流程优化

甲板航空保障作业流程是连接舰载机回收和出动的重要纽带,是舰载机机群作战能力生成的核心环节。面向航空保障作业部分流程的不确定性,以航空保障完工时间最小化为优化目标,考虑甲板作业过程所涉及的固定前后序流程约束、不可并行作业约束、保障人员约束、保障设备约束和资源供给能力约束等约束条件,构建了甲板航空保障作业流程优化的数学模型;在此基础上,针对问题的求解设计了相适应的GRASP算法,在初始解构造阶段引入了基于规则的生成策略,在邻域搜索阶段采用双向对齐机制进行局部优化。基于保障任务案例的仿真结果显示,该算法有效地解决了甲板航空保障作业流程优化且相对于其他经典算法更为高效和稳定。     

The BOOMERANG experiment

The BOOMERANG (Balloon Observations Of Millimetric Extragalactic RAdiation aNd Geophysics) experiment is an international effort to measure the Cosmic Microwave Background (CMB) anisotropy on angular scales of 20 to 4°, with unprecedented sensitivity, sky and spectral coverage. The telescope will be flown from Antarctica by NASA-NSBF with a long duration stratospheric balloon (7–14 days), and is presently scheduled for flight in 1995–1996. The experiment is designed to produce an image of the Cosmic Microwave Background with high sensitivity and large sky coverage. These data will tightly constrain the baryon density, the reionization history, and the formation of large-scale structure in the universe. BOOMERANG will test technologies and return science data that are essential to the design of a future space-borne mission to map CMB anisotropy.     

Energetic Particles Investigation (EPI)

The Energetic Particles Investigation (EPI) instrument operates during the pre-entry phase of the Galileo Probe. The major science objective is to study the energetic particle population in the innermost regions of the Jovian magnetosphere — within 4 radii of the cloud tops — and into the upper atmosphere. To achieve these objectives the EPI instrument will make omnidirectional measurements of four different particle species — electrons, protons, alpha-particles, and heavy ions (Z > 2). Intensity profiles with a spatial resolution of about 0.02 Jupiter radii will be recorded. Three different energy range channels are allocated to both electrons and protons to provide a rough estimate of the spectral index of the energy spectra. In addition to the omnidirectional measurements, sectored data will be obtained for certain energy range electrons, protons, and alpha-particles to determine directional anisotropies and particle pitch angle distributions. The detector assembly is a two-element telescope using totally depleted, circular silicon surfacebarrier detectors surrounded by a cylindrical tungsten shielding with a wall thickness of 4.86 g cm^-2. The telescope axis is oriented normal to the spherical surface of the Probe's rear heat shield which is needed for heat protection of the scientific payload during the Probe's entry into the Jovian atmosphere. The material thickness of the heat shield determines the lower energy threshold of the particle species investigated during the Probe's pre-entry phase. The EPI instrument is combined with the Lightning and Radio Emission Detector (LRD) such that the EPI sensor is connected to the LRD/EPI electronic box. In this way, both instruments together only have one interface of the Probe's power, command, and data unit.     

The Rosat mission

The primary scientific objective of the ROSAT mission is to perform the first all sky survey with an imaging X-ray telescope leading to an improvement in sensitivity by several orders of magnitude compared with previous surveys. Consequently a large number of new sources (> 10⁵) will be discovered and located with an accuracy of 1 arcmin. After completion of the survey which will take about half a year the instrument will be used for detailed observations of selected targets.The X-ray telescope consists of a fourfold nested Wolter type I mirror system with 80 cm aperture and 240 cm focal length, and three focal plane detectors. In the baseline version these will be imaging proportional counters (0.1 – 2 keV) providing a field of view of 2⁰ × 2⁰.     

Lasers as local oscillators

Conclusions In this survey we have tried to outline the aspects of current laser research and laser technology that are of relevance to heterodyne detection. We have seen that powerful, stable and narrowline sources are available to perform further heterodyne experiments at fixed frequencies. Taking a realistic view, one has to admit, however, that —at least in the far infrared — no really satisfyingtunable source is today available. In the near and the middle infrared, we are confident that further improvements of some of the devices discussed before will allow for true tunable heterodyne observations in the near future.     

Spatial distribution and orbital properties of interplanetary dust at high latitudes

Although the interplanetary dust cloud is assumed to be mainly concentrated in the ecliptic plane, there is a component of dust particles on highly inclined orbits that forms the out-of-ecliptic distribution. The ULYSSES mission for the first time makes this component accessible to in-situ, detection. Evidence for this dust component is also provided from the analysis of the Zodiacal light brightness and especially from the spherical shape of the solar F — corona. An obvious source for an out-of-ecliptic dust population is the activity of comets on high eccentric, highly inclined orbits. We discuss the dynamical conditions of particles under the influence of the radiation pressure when released from the comet and discuss their input to the dust cloud based on brightness analysis and in-situ results.     

Interference-free wind tunnel testing of jet propelled missiles

Wind tunnel evaluation of the aerodynamic interaction effects between plume and the external flow past the missile body including the wake boundary (“slipstream”) over powered flight envelopes of rocket propelled vehicles can be greatly facilitated — or even made possible — by a methodology replacing the hot propellant by cold, inert gases. Model nozzle design is based on the second order matching of plume geometry and first order modeling of plume stiffness. Since modeled nozzles will have larger throat radii than the prototypes, one can use sting-supported, sting-fed model installations thus eliminating aerodynamic interference effects due to struts. The concepts of simulated altitude and simulated full-scale Reynolds Number greatly reduce wind tunnel occupancy time. Computer programs, covering all steps of evaluating prototype nozzle performance, model sting nozzle design, model test evaluation and interpretation have been developed. The modeling methodology is supported by experimental results obtained in an induction wind tunnel at the FFA, Bromma, Sweden and in the 16 T and VKF-A altitude tunnels at AEDC, Tullahoma, Tenn.     

Interplanetary shock waves generated by solar flares

Recent observational and theoretical studies of interplanetary shock waves associated with solar flares are reviewed. An attempt is made to outline the framework for the genesis, life and demise of these shocks. Thus, suggestions are made regarding their birth within the flare generation process, MHD wave propagation through the chromosphere and inner corona, and maturity to fully-developed coronal shock waves. Their subsequent propagation into the ambient interplanetary medium and disturbing effects within the solar wind are discussed within the context of theoretical and phenomenological models. The latter — based essentially on observations — are useful for a limited interpretation of shock geometric and kinematic characteristics. The former — upon which ultimate physical understanding depends — are used for clarification and classification of the shocks and their consequences within the solar wind. Classification of limiting cases of blast-produced shocks (as in an explosion) or longer lasting ejecta (or piston-driven shocks) will hopefully be combined with the study of the flare process itself.The theoretical approach, in spite of its contribution to clarification of various concepts, contains some fundamental limitations and requires further study. Numerical simulations, for example, depend upon a non-unique set of multi-parameter initial conditions at or near the Sun. Additionally, the subtle but important influence of magnetic fields upon energy transport processes within the solar wind has not been considered in the numerical simulation approach. Similarity solutions are limited to geometrical symmetries and have not exploited their potential beyond the special cases of the blast and the constant-velocity, piston-driven shock waves. These continuum fluid studies will probably require augmentation or even replacement by plasma kinetic theory in special situations when observations indicate the presence of anomalous transport processes. Presently, for example, efforts are directed toward identification of detailed shock structures (as in the case of Earth's bow shock) and of the disturbed solar wind (such as the piston).Further progress is expected with extensive in situ and remote monitoring of the solar wind over a wide range of heliographic radii, longitudes and latitudes.This paper is a revised and updated version of an invited review originally presented at the IUGG XV General Assembly, Moscow, U.S.S.R., 2–14 August 1971.     

Virtis: An Imaging Spectrometer for the Rosetta Mission

The VIRTIS (Visual IR Thermal Imaging Spectrometer) experiment has been one of the most successful experiments built in Europe for Planetary Exploration. VIRTIS, developed in cooperation among Italy, France and Germany, has been already selected as a key experiment for 3 planetary missions: the ESA-Rosetta and Venus Express and NASA-Dawn. VIRTIS on board Rosetta and Venus Express are already producing high quality data: as far as Rosetta is concerned, the Earth-Moon system has been successfully observed during the Earth Swing-By manouver (March 2005) and furthermore, VIRTIS will collect data when Rosetta flies by Mars in February 2007 at a distance of about 200 kilometres from the planet. Data from the Rosetta mission will result in a comparison – using the same combination of sophisticated experiments – of targets that are poorly differentiated and are representative of the composition of different environment of the primordial solar system. Comets and asteroids, in fact, are in close relationship with the planetesimals, which formed from the solar nebula 4.6 billion years ago. The Rosetta mission payload is designed to obtain this information combining in situ analysis of comet material, obtained by the small lander Philae, and by a long lasting and detailed remote sensing of the comet, obtained by instrument on board the orbiting Spacecraft. The combination of remote sensing and in situ measurements will increase the scientific return of the mission. In fact, the “in situ” measurements will provide “ground-truth” for the remote sensing information, and, in turn, the locally collected data will be interpreted in the appropriate context provided by the remote sensing investigation. VIRTIS is part of the scientific payload of the Rosetta Orbiter and will detect and characterise the evolution of specific signatures – such as the typical spectral bands of minerals and molecules – arising from surface components and from materials dispersed in the coma. The identification of spectral features is a primary goal of the Rosetta mission as it will allow identification of the nature of the main constituent of the comets. Moreover, the surface thermal evolution during comet approach to sun will be also studied.     

IMAGE mission overview

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission is the first mission in NASA's MIDEX (Mid-size Explorer) program. It is the first satellite mission that is dedicated to imaging the Earth's magnetosphere. IMAGE will utilize the techniques of ultraviolet imaging, neutral atom imaging, and radio plasma imaging to map out global distributions of the electron and proton aurora; the helium ions of the plasmasphere; the ionospheric ion outflow; the medium-energy ions of the near-Earth plasma sheet, ring current, and polar cusp; the high-energy ions of the ring current and trapped radiation belts; and the total plasma density from the ionosphere out to the magnetopause. The imaging perspective is from an elliptical polar orbit with apogee at latitudes from 40° to 90° in the northern hemisphere. For ultraviolet and neutral atom imaging, the time resolution is set by the two-minute spin period of the IMAGE spacecraft, which will be sufficient to track the development of magnetospheric substorms. An important feature of the IMAGE mission is its completely open data set with no proprietary data or intervals. All data, along with software needed for plotting and analysis, will be available within 24 hours of acquisition.     

OSIRIS-REx: Sample Return from Asteroid (101955) Bennu

In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on January 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in November 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennu’s resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023.

     

Cosmic ray investigation for the Voyager missions; energetic particle studies in the outer heliosphere—And beyond

A cosmic-ray detector system (CRS) has been developed for the Voyager mission which will measure the energy spectrum of electrons from 3–110 MeV and the energy spectra and elemental composition of all cosmic-ray nuclei from hydrogen through iron over an energy range from 1–500 MeV/nuc. Isotopes of hydrogen through sulfur will be resolved from 2–75 MeV/nuc. Studies with CRS data will provide information on the energy content, origin and acceleration process, life history, and dynamics of cosmic rays in the galaxy, and contribute to an understanding of the nucleosynthesis of elements in the cosmic-ray sources. Particular emphasis will be placed on low-energy phenomena that are expected to exist in interstellar space and are known to be present in the outer Solar System. This investigation will also add to our understanding of the transport of cosmic rays, Jovian electrons, and low-energy interplanetary particles over an extended region of interplanetary space. A major contribution to these areas of study will be the measurement of three-dimensional streaming patterns of nuclei from H through Fe and electrons over an extended energy range, with a precision that will allow determination of anisotropies down to 1%. The required combination of charge resolution, reliability and redundance has been achieved with systems consisting entirely of solid-state charged-particle detectors.Principal Investigator of the Voyager Cosmic Ray Experiment.