首页 | 本学科首页   官方微博 | 高级检索  
     检索      

轴对称矢量喷管内流特性的数值模拟研究
引用本文:金捷,王强.轴对称矢量喷管内流特性的数值模拟研究[J].航空动力学报,2001,16(4):394-397.
作者姓名:金捷  王强
作者单位:北京航空航天大学热动力工程研究所,北京,100083
摘    要:利用矢通量分裂有限体积格式和 B-L湍流模型 ,采用 TTM网格生成和局部网格加密技术 ,求解三维N-S方程 ,对轴对称矢量喷管的内流流场进行数值模拟 ,并将计算结果与模型试验结果进行了分析比较。研究结果表明 ,在矢量状态下 ,计算结果和试验结果相比 ,壁面静压分布的相对误差不大于 1 3% ,气动矢量角的相对误差不大于 1 0 % ,推力系数的相对误差不大于 2 % ,所开发的计算方法和计算程序可用于轴对称矢量喷管的工程设计。

关 键 词:喷管流动  流动特性  数值模拟
文章编号:1000-8055(2001)04-0394-04
收稿时间:2000/11/3 0:00:00
修稿时间:2000年11月3日

Numerical Simulation of Static Internal Performance for an Axisymmetric Vectoring Exhaust Nozzle (AVEN)
JIN Jie and WANG Qiang.Numerical Simulation of Static Internal Performance for an Axisymmetric Vectoring Exhaust Nozzle (AVEN)[J].Journal of Aerospace Power,2001,16(4):394-397.
Authors:JIN Jie and WANG Qiang
Institution:JIN Jie 1,WANG Qiang 2 1.Chinese Gas Turbine Establishment,Chengdu610500,China, 2.4th Dept.,Beijing University of Aeronautics and Astronautics,Beijing100083,China
Abstract:The numerical simulation of static internal performance for an axisymmetric vectoring exhaust nozzle (AVEN) has been conducted with solving 3-D N-S equations by means of finite volume method with separation of vector flux and B-L turbulent model as well as technologies of TTM grids generation and compact local grids.The results of computation have been compared with that of scale model experiments.The investigation results indicated that during nozzle vectoring the relative tolerance of wall static pressure distribution is less than 13%,the relative tolerance of resultant vector angle is less than 10% and the relative tolerance of thrust coefficient is less than 2%.
Keywords:nozzle flow  flow characteristics  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号