首页 | 本学科首页   官方微博 | 高级检索  
     检索      

线驱动拟人臂机器人机构与前向运动学分析
引用本文:陈泉柱,陈伟海,张建斌.线驱动拟人臂机器人机构与前向运动学分析[J].北京航空航天大学学报,2006,32(8):988-991.
作者姓名:陈泉柱  陈伟海  张建斌
作者单位:北京航空航天大学 机械工程及自动化学院, 北京 100083
摘    要:为了克服手臂上的安装电机由于自重对拟人臂机器人承载能力和运动灵活性造成的影响,基于最新人臂仿生和并联机器人研究的成果,提出了一种用线驱动的并联机构替代手臂的肩、腕关节的串并联结构,并将驱动电机安放在基座上.讨论了从各个关节到基座的驱动绳索的走线方式及关节之间的耦合情况,在此基础上对前向运动学进行了分析,给出了末端相对于基础坐标系的位姿态正解.由给出的两组数值解实例,在ADAMS环境下进行了仿真,验证了算法的正确性. 

关 键 词:线驱动    并联机器人    运动学
文章编号:1001-5965(2006)08-0988-04
收稿时间:2005-10-24
修稿时间:2005年10月24日

Mechanism and forward kinematic analysis for cable-driven humanoid-arm manipulator
Chen Quanzhu,Chen Weihai,Zhang Jianbin.Mechanism and forward kinematic analysis for cable-driven humanoid-arm manipulator[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(8):988-991.
Authors:Chen Quanzhu  Chen Weihai  Zhang Jianbin
Institution:School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
Abstract:In order to overcome the influence of bad load-bearing capacity and the movement flexibility by the actuators installed on the humanoid-arm,a seriesparallel mechanism based on the latest theories of humanoid-arm bionics and research results of the parallel robots was proposed.The shoulder and wrist joints with a cable-driven parallel mechanism were replaced,and the motors were installed on the base.The cable-distribution from the base to the corresponding joint and the coupling instances among 3 joints were discussed.Furthermore,the forward kinematics to deduce the pose and position of the end effector respective to the base coordinate were analyzed.A simulation by means of ADAMS was carried out for two group numerical solutions to verify the effectiveness of proposed algorithm.
Keywords:cable-driven  parallel manipulator  kinematics
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《北京航空航天大学学报》浏览原始摘要信息
点击此处可从《北京航空航天大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号