Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

几种新型的星载多光谱和成像光谱仪

近几年出现了几种新型的星载多光谱和成像光谱仪,例如:Landsat-7卫星的有效载荷增强型主题测绘仪+（ETM+）;EOS AM-1卫星的有效载荷多角度成像光谱仪（MISR）和先进空间热发射和反射辐射计（ASTER）;特殊探测器紫外成像光谱仪（SSUSI）。文章从结构、性能参数等方面综述了这几种星载成像光谱仪。     

Is the phenology-based algorithm for mapping deciduous rubber plantations applicable in an emerging region of northern Laos?

Updated information of rubber plantations is essential for assessing socioeconomic and environmental impacts, especially in the emerging region of northern tropics. Here, a phenological method was modified to detect rubber plantations using Landsat Operational Land Imager (OLI) imagery in Phongsaly Province of northern Laos, where it begun a rubber boom in the mid-2000s due to geo-economic cooperation. It highlighted the landscape and pixel differences of deciduous rubber plantations in the tri-temporal phases (i.e., pre-defoliation, defoliation, and foliation) during the dry season due to phenological changes. Six commonly used vegetation indices (VIs), including the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Land Surface Water Index (LSWI), Atmospherically Resistant Vegetation Index (ARVI), Normalized Burn Ratio (NBR and NBR2) derived from OLI imagery during 2013–2016 were compared to determine the most suitable VI for discriminating the phenological differences of rubber plantations from natural forests. Then, the Differences of Normalized Burn Ratio (DNBR) was applied to generate the 30 m map of rubber plantations in 2016, by combining two masks of Landsat-derived forest and suitable elevation for rubber trees cultivation. The resultant map of rubber plantations had a classification accuracy of 93.7% and the Kappa coefficient of 0.848. Our study demonstrated the usefulness of the Landsat-derived tri-temporal phenological DNBR approach in an emerging region of northern Laos, despite requiring more scenes compared with single- and double temporal window methods.     

The Big Pine Creek watershed and climate change: A trend analysis of Landsat surface reflectance and PRISM datasets over the last 3 decades

Recent variations in normal meteorological conditions indicate the earth’s climate is changing in ways that may impact delicate ecological balances in sensitive regions. Identifying how those changes are affecting the biosphere is essential if we are going to be able to adapt to those changes and to potentially mitigate their harmful consequences. This paper presents a time series study of an alpine ecosystem in the Big Pine Creek watershed in California’s Eastern Sierra Nevada Mountain’s. Raw Landsat data covering the years 1984 through 2011 is converted to observed surface reflectance and analyzed for trends that would indicate a change in the ecosystem. We found that over the time period of the study, observed surface reflectance shows a general decline across the spectrum while our analysis of environmental data demonstrates statistically significant increases in temperatures. While declining reflectance in the visible and short wave bands are indicators of increased surface cover, the fact that the IR band also shows declines is consistent with a decline in tree density. This study provides a useful insight into the ecological response of the Big Pine Creek watershed to recent climate change. These findings suggest that alpine ecosystems are particularly sensitive to increasing temperatures. If these results are replicated in other alpine watersheds it will demonstrate that the biosphere is already showing the effects of a warmer environment.     

LANDSAT-7卫星的有效载荷ETM

LANDSAT-7卫星的主要有效载荷——改进型主题测绘仪(Enhanced Thematic Map-per Plus)ETM 是在landsat-4和Landsat-5卫星的主要有效载荷主题测绘仪(Thematic Map-per)的基础上改进的。ETM 相对TM的主要不同之处在于它增加了1个金色谱段和2个增益区域,增加了太阳定标器,并提高了红外谱段的分辨率,文章简要介绍ETM 的性能和主要组件。     

Spectral transformation of ASTER and Landsat TM bands for lithological mapping of Soghan ophiolite complex,south Iran

Spectral transformation methods, including correlation coefficient (CC) and Optimum Index Factor (OIF), band ratio (BR) and principal component analysis (PCA) were applied to ASTER and Landsat TM bands for lithological mapping of Soghan ophiolitic complex in south of Iran. The results indicated that the methods used evidently showed superior outputs for detecting lithological units in ophiolitic complexes. CC and OIF methods were used to establish enhanced Red–Green–Blue (RGB) color combination bands for discriminating lithological units. A specialized band ratio (4/1, 4/5, 4/7 in RGB) was developed using ASTER bands to differentiate lithological units in ophiolitic complexes. The band ratio effectively detected serpentinite dunite as host rock of chromite ore deposits from surrounding lithological units in the study area. Principal component images derived from first three bands of ASTER and Landsat TM produced well results for lithological mapping applications. ASTER bands contain improved spectral characteristics and higher spatial resolution for detecting serpentinite dunite in ophiolitic complexes. The developed approach used in this study offers great potential for lithological mapping using ASTER and Landsat TM bands, which contributes in economic geology for prospecting chromite ore deposits associated with ophiolitic complexes.     

Comparison of Landsat OLI,ASTER, and Sentinel 2A data in lithological mapping : A Case study of Rich area (Central High Atlas,Morocco)

The eastern part of the Rich area consists of the massive Paleozoic and Meso-Cenozoic cover formations that present the geodynamic development of the study area, where is characterized by various carbonate facies of Jurassic age. The geographical characteristic of the study area leaves the zone difficult to map by conventional methods. The objective of this work focuses on the mapping of the constituent lithological units of the study area using multispectral data of Landsat OLI, ASTER, and Sentinel 2A MSI. The processing of these data is based on a precise methodology that distinguishs and highlights the limits of the different lithological units that have an approximate similarity of spectral signature. Three techniques were used to enhance the image including Principal Component Analysis (PCA), Minimum Noise Fraction (MNF), and Independent Component Analysis (ICA). Lithological mapping was performed using two types of supervised classification : Maximum likelihood classifier (MLC) and Support Vector Machine (SVM).The results of processing data show the effectiveness of Sentinel 2A data in mapping of lithological units than the ASTER and Landsat OLI data. The classification evaluation of two methods of the Sentinel 2A MSI image showed that the SVM method give a better classification with an overall accuracy of 93,93% and a Kappa coefficient of 0.93, while the MLC method present an overall accuracy of 82,86% and a Kappa coefficient of 0.80. The results of mapping obtained show a good correlation with the geological map of the study area as well as the efficiency of remote sensing in identification of different lithological units in the Central High Atlas.     

Land use/land cover classification using time series Landsat 8 images in a heavily urbanized area

It is of great significance to timely, accurately, and effectively monitor land use/cover in city regions for the reasonable development and utilization of urban land resources. The remotely sensed dynamic monitoring of Land use/land cover (LULC) in rapidly developing city regions has increasingly depended on remote-sensing data at high temporal and spatial resolutions. However, due to the influence of revisiting periods and weather, it is difficult to acquire enough time-series images with high quality at both high temporal and spatial resolution from the same sensor. In this paper we used the temporal-spatial fusion model ESTARFM (Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model) to blend Landsat8 and MODIS data and obtain time-series Landsat8 images. Then, land cover information is extracted using an object-based classification method. In this study, the proposed method is validated by a case study of the Changsha City. The results show that the overall accuracy and Kappa coefficient were 94.38% and 0.88, respectively, and the user/producer accuracies of vegetation types were all over 85%. Our approach provides an accurate and efficient technical method for the effective extraction of land use/cover information in the highly heterogeneous regions.     

Selection of classification techniques for land use/land cover change investigation

The concerns over land use/land cover (LULC) change have emerged on the global stage due to the realisation that changes occurring on the land surface also influence climate, ecosystem and its services. As a result, the importance of accurate mapping of LULC and its changes over time is on the increase. Landsat satellite is a major data source for regional to global LULC analysis. The main objective of this study focuses on the comparison of three classification tools for Landsat images, which are maximum likelihood classification (MLC), support vector machine and artificial neural network (ANN), in order to select the best method among them. The classifiers algorithms are well optimized for the gamma, penalty, degree of polynomial in case of SVM, while for ANN minimum output activation threshold and RMSE are taken into account. The overall analysis shows that the ANN is superior to the kernel based SVM (linear, radial based, sigmoid and polynomial) and MLC. The best tool (ANN) is then applied on detecting the LULC change over part of Walnut Creek, Iowa. The change analysis of the multi temporal images indicates an increase in urban areas and a major shift in the agricultural practices.