Wavelength dimensioning for wavelength-routed WDM satellite network

Internet and broadband applications driven by data traffic demand have become key dri-vers for satellite constellations. The key technology to satisfy the high capacity requirements between satellites is optical satellite networks by means of wavelength division multiplexing inter-satellite links (ISLs) with wavelength routing (WDM-OSN). Due to the limited optical amplifier bandwidth onboard the satellite, it is important to minimize the wavelength requirements to provi-sion requests. However, ISLs should be dynamically established and deleted for each satellite according to its visible satellites. Furthermore, different link assignments will result in different topologies, hence yielding different routings and wavelength assignments. Thus, a perfect match model-based link assignment scheme (LAS-PMM) is proposed to design an appropriate topology such that shorter path could be routed and less wavelengths could be assigned for each ISL along the path. Finally, simulation results show that in comparison to the regular Manhattan street net-work (MSN) topology, wavelength requirements and average end-to-end delay based on the topol-ogy generated by LAS-PMM could be reduced by 24.8%and 12.4%, respectively.     

导航辅助下基于LAS码的天基多目标测控

中继卫星的天基测控是解决中低轨道航天器大范围、长时间、多目标测控的有效途径,但用户星到中继卫星的时延误差、多普勒频移校正误差等参数会对多目标测控带来干扰。针对该问题,首先分析了定位误差引起的时延误差、多普勒频移校正误差等因素,设计了天基多目标前向链路遥控SMA(S-band Multiple Access,S频段多址)信号形式和反向遥测链路SMA信号形式,选择与时延校正误差相匹配的LAS(Large Area Synchronous,大区域同步)码作为反向遥测信息的扩频码,建立了导航辅助的终端时延和频率预校正方案模型,可以有效消除多用户干扰。仿真表明,当Eb/N0≥10.5dB时,前向遥控信息误码率pe≤1×10~(-6),反向遥测信息误码率pe≤1×10~(-6),使用LAS码比Gold序列约有2dB性能改善,为基于我国天链卫星的中低轨道卫星稳定运行、载人航天交会对接以及后续空间站建设等任务的测控提供重要参考。     

基于LAS码的星群多目标测控技术研究

针对星群多目标同时测控问题,基于星群轨道根数的时延特性和多普勒频移特性分析可得,星群多目标测控的上行链路遥控与测距信号可实现S CDMA（Synchronous Code Division Multiple Access,同步码分多址）,由于星间距离较小,下行链路遥测与测距信号满足QS CDMA（Quasi synchronous code division multiple access,准同步码分多址）.上行链路遥控和测距信号形式设计为PCM BPSK CDMA（Pulse Code Modulation Binary Phase Shift Keying Code Division Multiple Access,脉冲编码调制二进制相移键控码分多址）,上行链路信号采用Gold序列扩频;下行链路遥测和测距信号形式设计为PCM BPSK CDMA,根据总的时延差,提出下行链路采用基于等长脉冲间隔法构造的LAS（Large Area Synchronous,大区域同步）码扩频.结果表明：比特信噪比Eb/N0为10.5 dB时,遥控误码率为1＆#215;10 6;Eb/N0为9.6 dB时,遥测误码率为1×10^5——与达到相同误码性能的Gold序列相比有1 dB改善,因此,LAS码相比于Gold码能够获得更好的误码性能.     

Exploration life support technology challenges for the Crew Exploration Vehicle and future human missions

As NASA implements the U.S. Space Exploration Policy, life support systems must be provided for an expanding sequence of exploration missions. NASA has implemented effective life support for Apollo, the Space Shuttle, and the International Space Station (ISS) and continues to develop advanced systems. This paper provides an overview of life support requirements, previously implemented systems, and new technologies being developed by the Exploration Life Support Project for the Orion Crew Exploration Vehicle (CEV) and Lunar Outpost and future Mars missions. The two contrasting practical approaches to providing space life support are (1) open loop direct supply of atmosphere, water, and food, and (2) physicochemical regeneration of air and water with direct supply of food. Open loop direct supply of air and water is cost effective for short missions, but recycling oxygen and water saves costly launch mass on longer missions. Because of the short CEV mission durations, the CEV life support system will be open loop as in Apollo and Space Shuttle. New life support technologies for CEV that address identified shortcomings of existing systems are discussed. Because both ISS and Lunar Outpost have a planned 10-year operational life, the Lunar Outpost life support system should be regenerative like that for ISS and it could utilize technologies similar to ISS. The Lunar Outpost life support system, however, should be extensively redesigned to reduce mass, power, and volume, to improve reliability and incorporate lessons learned, and to take advantage of technology advances over the last 20 years. The Lunar Outpost design could also take advantage of partial gravity and lunar resources.     

表面改性C/C复合材料与LAS玻璃陶瓷的连接

采用MgOAl₂O₃SiO₂(MAS)玻璃作为中间层,对SiCMoSi₂表面改性的C/C复合材料与Li₂CO₃Al₂O₃SiO₂(LAS)玻璃陶瓷进行热压连接。通过正交实验,研究了连接温度、连接压力和保温时间对试样连接强度的影响,确定最佳工艺参数为：1 200 ℃,20 MPa,15 min,所得到连接接头的最高剪切强度可达30 MPa。利用扫描电子显微镜（SEM）、能谱仪（EDS）和背散射电子像（BEI)对SiCMoSi₂涂层、连接界面的形貌以及组成进行了分析。研究结果表明,SiCMoSi₂涂层与基体结合紧密,Si,C元素在界面处呈梯度状分布,形成厚度约为15 μm的过渡层。MAS玻璃中的组分与LAS玻璃陶瓷和SiCMoSi₂涂层存在相互渗透现象,形成紧密的C/C(SiCMoSi₂)/MAS/LAS结构,界面间的结合良好。