一种深空粒子采样返回探测器构型设想

以太阳风粒子、深空尘埃等为目标的采样返回探测任务是空间科学与深空探测研究的热点方向之一。对“星尘号”“起源号”两个典型采样返回探测器的构型进行了分析,并梳理了其主要构型特点。结合我国月地高速再入返回飞行器的构型特点,提出了一种深空粒子采样返回探测器构型的设想：总体构型由长方形主体和流线型返回器组成,主体构型适应于承载返回器和其他装器设备,返回器构型适应于样品收集和再入返回气动外形。设计方案采用了充气式采样器进行粒子收集,具有体积小、重量轻、折叠效率高、展开可靠、工程实施简单等特点,并采用了可重复收拢展开的太阳翼,能够适应收集不同类型深空粒子的需求。     

Mars Phobos and Deimos Survey (M-PADS) – A martian Moons orbiter and Phobos lander

We describe a Mars ‘Micro Mission’ for detailed study of the martian satellites Phobos and Deimos. The mission involves two ∼330 kg spacecraft equipped with solar electric propulsion to reach Mars orbit. The two spacecraft are stacked for launch: an orbiter for remote investigation of the moons and in situ studies of their environment in Mars orbit, and another carrying a lander for in situ measurements on the surface of Phobos (or alternatively Deimos). Phobos and Deimos remain only partially studied, and Deimos less well than Phobos. Mars has almost always been the primary mission objective, while the more dedicated Phobos project (1988–89) failed to realise its full potential. Many questions remain concerning the moons’ origins, evolution, physical nature and composition. Current missions, such as Mars Express, are extending our knowledge of Phobos in some areas but largely neglect Deimos. The objectives of M-PADS focus on: origins and evolution, interactions with Mars, volatiles and interiors, surface features, and differences. The consequent measurement requirements imply both landed and remote sensing payloads. M-PADS is expected to accommodate a 60 kg orbital payload and a 16 kg lander payload. M-PADS resulted from a BNSC-funded study carried out in 2003 to define candidate Mars Micro Mission concepts for ESA’s Aurora programme.     

Manifold dynamics in the Earth–Moon system via isomorphic mapping with application to spacecraft end-of-life strategies

Recently, manifold dynamics has assumed an increasing relevance for analysis and design of low-energy missions, both in the Earth–Moon system and in alternative multibody environments. With regard to lunar missions, exterior and interior transfers, based on the transit through the regions where the collinear libration points L₁ and L₂ are located, have been studied for a long time and some space missions have already taken advantage of the results of these studies. This paper is focused on the definition and use of a special isomorphic mapping for low-energy mission analysis. A convenient set of cylindrical coordinates is employed to describe the spacecraft dynamics (i.e. position and velocity), in the context of the circular restricted three-body problem, used to model the spacecraft motion in the Earth–Moon system. This isomorphic mapping of trajectories allows the identification and intuitive representation of periodic orbits and of the related invariant manifolds, which correspond to tubes that emanate from the curve associated with the periodic orbit. Heteroclinic connections, i.e. the trajectories that belong to both the stable and the unstable manifolds of two distinct periodic orbits, can be easily detected by means of this representation. This paper illustrates the use of isomorphic mapping for finding (a) periodic orbits, (b) heteroclinic connections between trajectories emanating from two Lyapunov orbits, the first at L₁, and the second at L₂, and (c) heteroclinic connections between trajectories emanating from the Lyapunov orbit at L₁ and from a particular unstable lunar orbit. Heteroclinic trajectories are asymptotic trajectories that travels at zero-propellant cost. In practical situations, a modest delta-v budget is required to perform transfers along the manifolds. This circumstance implies the possibility of performing complex missions, by combining different types of trajectory arcs belonging to the manifolds. This work studies also the possible application of manifold dynamics to defining suitable, convenient end-of-life strategies for spacecraft orbiting the Earth. Seven distinct options are identified, and lead to placing the spacecraft into the final disposal orbit, which is either (a) a lunar capture orbit, (b) a lunar impact trajectory, (c) a stable lunar periodic orbit, or (d) an outer orbit, never approaching the Earth or the Moon. Two remarkable properties that relate the velocity variations with the spacecraft energy are employed for the purpose of identifying the optimal locations, magnitudes, and directions of the velocity impulses needed to perform the seven transfer trajectories. The overall performance of each end-of-life strategy is evaluated in terms of time of flight and propellant budget.     

Analysis of data of “Clementine” and “KAGUYA” missions and “ULCN” and “KSC-1162” catalogues

In this paper an analysis of data coordinate systems from selenographic catalogues and space missions was carried out. The lunar macrorelief models were made on basis of the software package ASNI USTU using method of the spherical harmonic expansion. These models accurately describe the global features of the lunar figure. To construct these models the following sources of topographic information were used: “Clementine” and “KАGUYА” (Selena, Japan mission) missions, “KSC-1162” (Kazan selenocentric catalogue), “Kiev” (selenodesic catalogue), “SAI” (Chuikova (1975)), “Bills, Ferrari”, “ULCN” (The Unified Lunar Control Network 2005). Direct comparison hypsometric information “KSС-1162” catalogue data with “Clementine” mission was carried out. These researches confirmed a good agreement of the hypsometric information of compared systems. The normalized coefficients were obtained on basis of the hypsometric information expansion for eight sources. The displacement of the lunar center of mass (LCM) relatively to the lunar center of figure (LCF) was obtained by using topographic data selenodetical catalogues and space missions.     

Interstellar planetary protection

In the coming decades the detection of Earth-like extrasolar planets, either apparently lifeless or exhibiting spectral signatures of life, will encourage design studies for craft to visit them. These missions will require the elaboration of an interstellar planetary protection protocol. Given a specific dose required to sterilize microorganisms on a spacecraft, a critical mean velocity can be determined below which a craft becomes self-sterilizing. This velocity is calculated to be below velocities previously projected for interstellar missions, suggesting that an active sterilization protocol prior to launch might be required. Given uncertainties in the surface conditions of a destination extrasolar planet, particularly at microscopic scales, the potential for unknown biochemistries and biologies elsewhere, or the possible inoculation of a lifeless planet that is habitable, then both lander and orbiter interstellar missions should be completely free of all viable organisms, necessitating a planetary protection approach applied to orbiters and landers bound for star systems with unknown local conditions for habitability. I discuss the case of existing craft on interstellar trajectories – Pioneer 10, 11 and Voyager 1 and 2.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

基于人工免疫算法的载人登月任务地月转移双脉冲中止策略研究彭 坤,果琳丽,向开恒,王 平,杨 雷

载人登月任务中,任务中止策略设计是确保航天员安全返回的重要基础。首先结合"星座"计划飞行方案分析了载人登月任务各飞行阶段的中止策略;其次针对地月转移巡航段进行了双脉冲中止策略设计,以速度增量数值、方位角以及变轨时间间隔为控制变量,加入轨道同向、近地点高度、偏心率以及飞行时间约束,提出双脉冲变轨计算流程;最后采用人工免疫算法对该问题进行了求解和优化。仿真算例表明,双脉冲中止策略存在多组解,其全局分布特性为:飞行时间越短速度增量需求越大;飞行时间相近时,大偏心率中止轨道对应的速度增量小;故障点离地月加速点越近,所需速度增量越小。同时也验证了人工免疫算法求解双脉冲中止策略问题的有效性。     

Inverse design of mission success space for combat aircraft contribution evaluation

This paper presents a novel design method of the Mission Success Space (MSS) for the evaluation on aircraft contribution effectiveness. MSS concept was proposed for giving success criterion of a mission and judging the success by conventional mission effectiveness with regards to the aircraft capabilities. This space is created by the Mission Success Function (MSF) and the original Effectiveness Index Space (EIS) where empirical equations are usually assumed to be MSFs. Based on this MSS concept, this paper firstly defines the MSS-based evaluation, then further summarizes the evaluation process of the Contribution to System-of-Systems (CSS). More importantly, based on the thought of Inverse Design (ID), a new design method of MSF is presented comprehensively analyzing aircraft’s CSS in a combat mission without using any empirical MSF. The definition of MSS based ID is given and the design procedure is sequentially introduced. Two different confrontation cases are depicted with many details as the simulation validation: Air-to-ground and Penetration. There are two design variables considered for designing MSS in the latter case while only one for the former. However, in both cases, the best design is given by evaluating the Gaussian fitting performance of CSS.     

载人火星探测进展及其EDL过程GNC关键技术

随着火星探测技术的不断发展和探测任务的不断推进，载人火星探测在未来将会成为火星探测的重要手段。首先，回顾了无人火星探测任务的发展历程，对比分析了部分无人火星探测器进入、下降与着陆（EDL）过程的参数。然后，结合无人火星探测、载人月球探测和载人航天再入过程，梳理了载人火星探测的特点及需求，系统地总结了前苏联/俄罗斯和美国的载人火星探测研究进展以及技术储备。接着，归纳了载人火星探测的体系构成、集结方式和主要的技术挑战。最后，概括了载人火星EDL过程面临的难题，重点阐述了EDL的导航、制导与控制（GNC）关键技术。