月球探测器转移轨道的特性分析

主要分析了月球探测器由近地点出发，在假定末端条件不变的情况下，其转移轨道的特性参数对初始条件和变轨所需的速度脉冲等的影响；考虑的特性参数的变化包括转移轨道倾角的变化，近地点高度的变化和转移时间的不同．     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

10°尖锥标模高超声速动导数的实验测量

在中科院力学所JP－4B高超声速脉冲风洞中，用模型自由飞方法对1°尖锥开展动态实验测量，并用参数微分法辨识得到了该模型的俯仰阻尼导数。文中还介绍了在模型优化设计，模型工艺以及实验测量记录和数据判读技术方面的一些进展。实验结果表明；脉冲风洞中模型自由飞方法得到的10°尖锥标模高超声速动态气动特性测量值与国外可比数据一致，重复测量精度与弹道把试验相当。     

粉末燃料冲压发动机理论性能分析

研究粉末燃料冲压发动机的理论性能,采用编制的热力计算软件,分别对以硼粉、铝粉、镁粉为燃料的发动机性能进行了计算,分析了不同参数对发动机比冲的影响趋势,为进一步研究及发动机设计奠定了基础。通过与常规液体燃料冲压发动机及固体火箭冲压发动机进行比较,说明了粉末燃料冲压发动机在比冲及体积比冲方面的优势。鉴于金属粉末燃烧产物中凝相物质含量高的特点,研究了两相流损失对发动机性能的影响。     

低速走丝电火花线切割加工断丝原因分析及处理

本文从电极丝、工作液、伺服控制和脉冲电源控制策略等几个方面,详细分析了低速走丝电火花线切割加工发生断丝现象的主要原因,并提出了相应的改造措施.     

空气压强对激光推进器冲量耦合系数影响

设计并加工了激光推进器实验模型,以空气为推进工质,利用脉冲式CO2激光器,研究了空气压强对激光推进器冲量耦合系数影响。实验结果表明,空气压强对激光推进器性能有显著影响。在文中实验条件下,当空气压强大于6 kPa时,激光推进器冲量耦合系数随压强减小而减少较慢;当空气压强小于6 kPa时,激光推进器冲量耦合系数随压强减小而减少很快。     

激光击穿不同气体的激光推进实验研究

为了研究激光击穿气体工质的机理,通过测量冲量耦合系数,比较了激光在不同压强下击穿不同惰性单原子气体(氩气、氦气)的效果,试验结果表明:原子序数较大的无机气体原子可以电离出更多的电子,从而击穿阈值更低,激光能量转化为爆轰波能量的能量转化效率更高,冲量耦合系数就越大,同样条件下更容易击穿。推进剂气体不同,冲量耦合系数差别较大。测量摆角对结果的影响也较大。     

潜射导弹级间段密封圈动态密封性能模拟试验方法

根据潜射导弹级间段密封圈在出水过程中的动态变形参数设计了一套模拟试验件和加载、加水及测量装置,采用摆锤冲击加载方式和裂纹动态张开位移测量方法再现了密封圈在导弹出水过程中的使用条件,证明密封圈在规定的开缝宽度、开缝时间和弹体内外压差的使用环境下能够保证防水和密封效果。利用两自由度冲击响应模型分析了试验的动响应曲线,给出了试验系统模态参数的识别结果。     

宽马赫数路德维希管风洞及其关键技术

随着高马赫数飞行器研制需求的增加，急需脉冲型风洞运行范围向中低马赫数段扩展，特别是需要具有跨马赫数运行能力。以路德维希管原理运行的管风洞试验设备，由于建设及使用成本较低、参数调节方便、流场品质高等优点，已在亚/跨/超声速及高超声速领域得到了发展和应用，体现出了宽马赫数的应用潜力。本文分析了宽马赫数脉冲型风洞发展现状，重点介绍了路德维希管风洞及其在宽马赫数应用中急需解决的关键技术，包括宽马赫数喷管设计技术、高温管外加热技术以及高温高压隔离技术。     

Reachable domain of spacecraft with a single tangent impulse considering trajectory safety

The reachable domain of the two-body transfer orbit with a single upper-bounded tangent impulse is studied. Three cases are analyzed for either the magnitude of the tangent impulse or the initial impulse point being free, or both being free. For a fixed impulse magnitude and a free initial impulse point, the initial orbit is proved to be one of the envelopes of the reachable domain. Moreover, the trajectory safety for the transfer orbit requires a lower bound on the perigee altitude and an upper bound on the apogee altitude. Then the ranges of the impulse magnitude and the initial true anomaly can be obtained by solving quadratic and cubic inequalities, respectively. If both constraints are required for an arbitrary impulse point, the range of the impulse magnitude is obtained with impulses at the perigee and the apogee. Several numerical examples with different eccentricities are provided to show the geometry of the reachable domain and to verify the proposed method.