Analysis of the dynamic behavior of structures using the high-rate GNSS-PPP method combined with a wavelet-neural model: Numerical simulation and experimental tests

Recently, the high rate global navigation satellite system-precise point positioning (GNSS-PPP) technique has been used to detect the dynamic behavior of structures. This study aimed to increase the accuracy of the extraction oscillation properties of structural movements based on the high-rate (10?Hz) GNSS-PPP monitoring technique. A developmental model based on the combination of wavelet package transformation (WPT) de-noising and neural network prediction (NN) was proposed to improve the dynamic behavior of structures for GNSS-PPP method. A complicated numerical simulation involving highly noisy data and 13 experimental cases with different loads were utilized to confirm the efficiency of the proposed model design and the monitoring technique in detecting the dynamic behavior of structures. The results revealed that, when combined with the proposed model, GNSS-PPP method can be used to accurately detect the dynamic behavior of engineering structures as an alternative to relative GNSS method.     

子带自适应阵列处理的实现与性能分析

针对空频自适应滤波处理中节拍样点两端的输出信干噪比急剧下降的问题,建立了子带自适应阵列处理与空时自适应阵列处理等效关系的数学模型,指出了变换正交基函数的影响,提出利用时频分析特性优良的小波包变换取代傅立叶变换形成新的子带自适应阵列处理,减少子带间的频谱混叠,从而提高系统节拍样点两端的输出信干噪比。对基于不同窗函数的空频自适应处理和基于小波包变换的子带自适应处理进行了性能仿真,验证了小波包相对于加窗空频自适应处理的优越性。     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

Time-series analysis of GPS measurements for long-span bridge movements using wavelet and model prediction techniques

This study aims at assessing the safety behavior of the Incheon long-span bridge using high rate (10?Hz) geodetic monitoring global positioning system (GPS). The time series of wavelet spectrum analysis is utilized to assess the dynamic behavior of the bridge. The coefficients and model errors of the time series autoregressive-moving average (ARMA) model are used to evaluate the movement performances of the bridge. The results show that: (i) the accuracy of GPS measurements to extract the dynamic behavior of the bridge is 97.27% when compared with the design results. (ii) the behavior of the bridge is within the safety limits of the bridge design with minimum observed changes for the historical GPS measurements in time and frequency domains, the mean deflection of bridge deck is 8.26?mm and frequency changes of bridge is 0.004?Hz compared with the design results. (iii) the time series analysis of the wavelet spectrum and ARMA model coefficients can be used to detect the significant frequency changes and study the rigidity of the bridge performance, respectively; and the both methods are found to be suitable techniques to estimate the performance changes of the GPS measurements in the time and frequency domains during the monitoring time period.     

Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

Automatic detection of geomagnetic sudden commencement via time–frequency clusters

One of global processes in ionosphere–thermosphere–magnetosphere system is the geomagnetic storms. It is of great importance to develop an algorithm that auto-detects sudden commencement because it could be an indicator of onset of the geomagnetic storm. Automatic detection of geomagnetic sudden commencement is based on time–frequency clusters generated by spectrogram. Proposed algorithm is tested on data set collected from stations belong to the international real-time magnetic observatory network (INTERMAGNET). Maximum standard deviation of algorithm detection times is observed to be one minute of the corresponding arrival times published by National Geophysical Data Center (NGDC).     

小波去除噪音算法研究

介绍了小波变换滤除噪音的机理和与傅立叶变换相比的优越性，其中包括确定性噪音和随机噪音。讨论了增强去噪效果的几种改进方案并提出一种试验估计去噪方法，对工程应用有一定的实用价值。     

Detrend effect on the scalograms of GPS power scintillation

The study of amplitude scintillation on GPS radio links is usually done after detrending the time series of the transmitted power so to define scintillations as the chaotic fluctuation around a unitary value. In a sense, the choice of how to detrend the time series is part of the definition of scintillation.     

小波技术在组合导航系统故障诊断中的应用

针对组合导航系统中存在的故障类型和特点，提出一种新的基于信号处理的故障检测方法。该方法利用小波分析技术对含有故障信息的系统信号进行分析处理，并将此方法应用于SINS／GPS组合导航系统。仿真结果分析表明，小波分析技术能很好地及时检测出组合导航系统的硬故障，且更加简便灵活，从而可以将小波分析技术应用于组合导航系统的故障检测。     

脉动压力测量技术在火箭发动机试验中的应用

为研究和探索火箭发动机地面试验推力室脉动压力测量方法和数据分析技术,介绍了火箭发动机试验中脉动压力测量系统的组成和参数的测量方法;分析了引压导管的动态特性及其对脉动压力参数测量的影响;采用齐平安装的方式,按照所述方法建立脉动压力参数测量系统;结合推力室多个振动测点的数据,分别采用快速傅里叶变换(FFT)和小波包分解两种方法对脉动压力数据进行分析。根据两种方法的分析结果推断发动机在径向和切向产生了不稳定燃烧。对探索和推广脉动压力测量技术在火箭发动机试验和其他组合件试验中的应用具有重要意义。