燃气收缩式作动器--一种新颖高效的着陆缓冲装置

文章介绍一种新颖的着陆缓冲装置——燃气收缩式作动器。可是在回收物体乘降落伞着陆前,通过回收物体快速向上（向降落伞方向）提升,抵消物伞系统的垂直下降速度,从而达到回收物体以很小的速度着陆,实现回收物体的软着陆。     

战术导弹垂直发射系统的现状及发展趋势

介绍了垂直发射装置通用化、箱式化和模块化的总体特征。详细论述了国外现役8种类型的垂直发射系统，根据基本结构特点将垂直发射装置分为模块式结构、独立布置的分离式结构和旋转式结构，另依据发射动力将垂直发射装置分为热发射和冷发射。以热发射的同心筒式结构和冷发射采用的大倾角、模块化设计为例．分析了垂直发射装置的发展趋势。     

一种40°撞击角双股自击式喷嘴试验

研究了一种 4 0°撞击角双股自击式喷嘴冷流特性和热试验流量系数。冷流试验以常温水为介质 ,用激光散射测粒仪和探针研究了该喷嘴的雾化质量和流强分布。在 1 35MPa～ 1 75MPa的喷嘴压降下该喷嘴椭圆形喷雾的喷雾锥角为 2 6°～ 38°,流强呈单峰型分布。统计研究了该喷嘴冷试验和在液氧介质下热试验时的喷嘴流量系数 ,流量系数在 0 6～ 0 8之间     

环形火焰引发爆震的数值研究

采用改进的适于多组分反应流的波传播算法,对直管道中甲烷．空气预混气的爆震引发过程进行数值研究,考虑了两种不同构型的初始环形火焰对引发爆震的影响。对这两种构型下爆震引发过程中的压力场、温度场、反应放热率以及组分浓度进行了计算,由此探讨了“热点”形成机制及其对爆震引发的作用。结果表明,火焰发展产生的燃烧压缩波在管壁或管轴心发生汇聚、碰撞所形成的复杂波系与火焰相互作用,导致火焰前锋与压缩波之间的局部区域反应剧烈,反应放热率明显增加,从而促使热点形成。形成的热点迅速放大成为过驱爆震波,并逐渐衰减为稳定爆震波。稳定爆震波阵面参数与CJ理论结果进行了对比,两者符合得较好。     

Instability and unsteadiness of aircraft wake vortices

This paper presents a review of theoretical and experimental results on stability and other unsteady properties of aircraft wakes. The basic mechanisms responsible for the propagation and the amplification of perturbation along vortices, namely the Kelvin waves and the cooperative instabilities, are first detailed. These two generic unsteady mechanisms are described by considering asymptotic linear stability analysis of model flows such as vortex filaments or Lamb–Oseen vortices. Extension of the linear analysis to more representative flows, using a biglobal stability approach, is also described. Experimental results obtained using LDV, hot wire and PIV in wind tunnels are presented and they are commented upon the light of theory.     

新型超高强度钢G50热变形与组织性能的关系

研究了新型无钴超高强度钢G50经不同锻造比墩粗锻造后材料的组织及性能的变化情况，并检验该新材料随锻造及热变形的能力。结果表明，该新材料具有非常好的可锻性及热成形性，且不同锻造比锻造并按标准制度热处理后的性能相差不大。     

热压工艺在Cf／SiC复合材料制备中的应用

探讨了热压工艺 (HP)在常压浸渍裂解 (PIP)制备 Cf/Si C复合材料制备过程中的应用 ,认为热压浸渍裂解工艺 (HP-PIP)既可以改善碳纤维与基体 Si C之间的界面 ,又可以提高材料的致密度 ,使材料内部的空隙减少或消失 ,同时使孔隙排布均匀 ,从而使材料的性能有了大幅度提高 ,其强度由原来的 2 90 MPa提高到 5 40 MPa,并且可重复性很好     

热变形对TC4氩弧拼焊板拉伸与疲劳性能的影响

在700℃下,对TC4氩弧拼焊板进行了3个变形量(主应变0.5％、1.6％、2.7％)的等双向拉伸成形,研究了热变形对TC4氩弧拼焊板单向拉伸性能和疲劳寿命的影响.结果表明:等双拉变形前后,TC4氩弧拼焊板拉伸试样均断裂在焊接热影响区,热影响区的强度低于母材和焊缝.随着等双拉热变形量增加,TC4拼焊板试样疲劳寿命有所增加,这是因为一定变形量的热成形释放了焊接残余应力.     

热等静压工艺制备的Ti-6Al-4V薄壁筒的切削加工

为了能够提高钛合金薄壁筒的加工效率,利用热等静压工艺制备了两个具有不同结构的Ti-6Al-4V薄壁筒,研究了夹具、填充泥浆和筒结构对Ti-6Al-4V薄壁筒的外圆表面粗糙度和精度的影响。结果显示,Ti-6Al-4V热等静压薄壁筒经过切削加工能够达到精度要求,填充泥浆降低了弹性回弹,提高了薄壁筒外圆精度;筒结构的内圆环和粗大端能够提高刚度,有效降低了外圆表面粗糙度值;夹具尺寸误差对圆度和同轴度影响较大,较大的尺寸误差显著降低了筒的外圆精度。     

Corrosion mechanism investigation of TiN/Ti coating and TC4 alloy for aircraft compressor application

It is imperative to develop multifunctional erosion and corrosion resistant coatings for compressor blades of aircraft engines in harsh environment. PVD (Physical Vapor Deposition) technology has the advances in processing erosion-resistant coatings; however, the performance of PVD coatings to combat corrosion depends on various coating defects. Determining and comparing the corrosion performances of PVD TiN/Ti coating and uncoated TC4 alloy was the main objective of present work. The 960 h salt spray corrosion and 116 h hot corrosion tests were conducted to simulate the grounding and working environments of the aircraft compressors. The corrosion mechanisms due to the coating defects such as pinhole, columnar boundary and large grain were analyzed based on the OM, Confocal microscope, electrochemical measurements, SEM, XRD and EDS results. Owing to the disordered state associated with the columnar boundary and the coating defect, nitrogen could be easily replaced by oxygen in the hot corrosion process, these structures were channels for fast diffusion of oxygen. Moreover, the Gibbs energy changes of Ti oxidation and TiN oxidation were thermodynamically calculated according to the working condition of aircraft compressors, and considerable research effort was focused on mapping out the phase diagram of Ti, TiN and high pressure gases. The findings of this research can provide insights into developing multifunctional coatings for future aircraft engines.