空间载荷机柜热控设计的仿真研究

空间站主动热控系统的作用是提供和保持航天员、仪器设备和结构部件所要求的温度、湿度和风速等热环境。本文以空间载荷机柜为热控系统的基本单元，建立了以单相流体循环回路为基础、采用液冷结合风冷的冷却方式的载荷机柜数学模型；介绍了模糊增量控制算法的工作原理；提出了采用模糊增量控制算法，以液冷支路进出口温差和风冷支路冷却量占总冷却量的比值为控制目标的反馈控制策略。同时文章采用数值模拟方法研究了控制系统的动态响应效果。仿真结果显示，模糊增量控制算法具有响应迅速、超调量小、无静态误差的特点，控制策略满足有效性、稳定性和高精确度的要求。     

Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

卫星微波遥感定标技术

在简要论述微波遥感定标技术工作特点的基础上，着重分析星载有源微波遥感定标技术基本原理和关键技术，比较了各种定标方法特点，提出了若干建议。     

自动测试系统适配器自动设计技术

 针对当前自动测试系统（ATS）适配器设计中存在的“自动化程度较低、缺乏通用性”的不足，开发了ATS通用适配器自动设计技术。建立了一整套通用适配器自动设计流程，在依次完成通用端口设计、UUT测点资源匹配、适配器开关网络设计、相关工程设计后即可实现自动设计一个通用适配器的目的。以某机载通讯设备自动测试系统为例，采用该技术可缩短ATS适配器开发周期至原来的1/3，降低开发成本，提高设计的标准化、通用化程度，适配器需要量由5个减为1个。     

卫星姿控发动机喷管羽流撞击效应试验

在高超声速低密度风洞中试验研究了卫星姿控发动机喷管羽流对平板模型的撞击效应,包括气动力和气动热效应。试验气体为加热的氮气。对两个卫星姿态控制发动机喷管的十种实验状态进行了测量。测出了平行于喷管轴线的平板模型上的压力分布和温度变化及处于喷管上方后流区的挡板的温度变化,给出了平板模型上的气动力和气动热分布规律,并判断是否形成后流区。测量结果表明,试验结果可靠,具有工程应用价值,能为姿控发动机在卫星上的布局提供参考。     

自制一种高效便利的静压接头

大气数据系统泄漏测试中静压连接困难,目前在用的两种静压接头都各有缺陷,因此自制了一种适用于各种机型的静压接头,其结构简单、高效易用、可靠性高,提高了工作效率。     

A concept mission for the Stellar Population and Evolution with Cubesats (SPEC)

Binary or multiple stellar systems, constituting almost a third of the content of the Milky Way, represent a high priority astronomical target due to their repercussions on the stellar dynamical and evolutionary parameters. Moreover the spectral study of such class of stars allows to better constrain the evolutionary theories of the Galactic stellar populations. By resolving the members of stellar systems through photometric observations we are able to perform more detailed measurements to infer their mass. In this paper we investigate the feasibility of a cubesat based mission including an optical payload to directly optically discriminate the members of a selected sample of binary systems. The scientific targets, consisting 11?M class dwarf stars binary systems, have been extracted from the already studied Riaz catalogue. These subset has been selected considering the star distance, the members angular separation, and the distance from the Galactic plane (due to limit the background and foreground contamination). The satellite concept is based on a 6 unit Cubesat embedding some commercial off the shelf components and an ad hoc designed optical payload occupying almost 4 units. The optical configuration has been chosen in order to fit the angular resolution requirements, as derived from the target characteristics. Moreover, according to the optical analysis and the computed field of view some requirements on the attitude control system have been inferred and fulfilled by the component selection. The paper is organized as in the following: a brief scientific introduction is made; consequently the project is described with particular attention to the optical design and the standard sub-systems; finally the conclusions are drawn and the future perspectives are investigated.     

永磁同步电机驱动太阳翼扰动力矩建模与仿真

建立太阳翼驱动机构(SADA)永磁同步电机的电磁方程，并利用固定界面模态综合法建立SADA驱动太阳翼耦合系统的振动方程；设计模拟柔性负载，对SADA驱动该柔性负载的扰振力矩进行仿真分析。结果表明，SADA驱动柔性负载运行过程中所产生扰振力矩主要由两个原因引起：1)电流噪声引起的力矩波动；2)控制参数选取不当引起的转角波动。     

空中发射初始状态对运载火箭有效载荷的影响

空中发射可以明显提高火箭有效载荷,减少火箭发射场地的数量和高额的维护经费,缩短发射周期。本文研究了空中发射初始状态对运载火箭有效载荷的影响,通过飞行轨道的模型简化,首先建立了火箭飞行的数学模型,然后定量地分析了发射高度和发射速度对火箭入轨后有效载荷的影响。研究结果表明：若提高发射高度和发射速度,可以明显增加有效载荷,且基本发射高度、发射速度分别与有效载荷表现为线性关系。相对地面发射来说,如果初始高度达到30千米,有效载荷提升到1.63倍;如果初始高度达到30千米,初始速度达到1000米每秒（约3马赫）,有效载荷将是传统地面发射的5.43倍。单纯从初始高度和速度的因素看,初始发射速度对有效载荷提升的影响更显著,故在考虑经济性情况下设计发射平台时应更加注重发射速度的提高。     

带移动负载海上浮筒系统运动响应特性初步研究

将某类海上自动作业系统简化为带移动负载的浮筒系统,其中负载简化为外径为180mm、约50kg重的柱型体,浮筒为外径533mm的圆筒;初步设计了浮筒系统的主参数。在此基础上,采用频域数值模拟计算,获得了浮筒自由状态下的固有周期和运动响应传递函数(RAO);再采用时域模拟方法,预报了3级海况下(JONSWAP谱)浮筒系统整体的运动响应特性,给出了运动响应幅值、最小干舷高度等特性参数,可为相关装备设计提供技术参考和借鉴。