Effect of bristle pack position on the rotordynamic characteristics of brush-labyrinth seals at various operating conditions

Over the last few decades, the research on the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals is not sufficient. To this end, two kinds of brush-labyrinth seals for the bristle pack element installed upstream of the labyrinth teeth named BSU and installed downstream of the labyrinth teeth called BSD were used to investigate the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals. Using the numerical model combining the porous medium model and the whirling rotor method, the rotordynamic characteristics of the BSU and BSD at various operating conditions including four kinds of pressure ratios, five kinds of inlet preswirl speeds and four kinds of rotor spinning speeds were conducted. The obtained results show that the effects of operating conditions on rotordynamic coefficients for the different seal configurations are different. The direct stiffness, cross-coupled stiffness and direct damping of the BSU are lower than those of the BSD. The rotordynamic coefficients of the BSU are more insensitive to the operating conditions variation. From the perspective of the seal stability, the BSU is a better brush-labyrinth seal configuration at high pressure ratio, high positive preswirl or high rotor spinning speed conditions. While in the case of low pressure ratio, low positive preswirl or low rotor spinning speed conditions, the BSD is a better choice.     

多种工质下螺旋波等离子体源波场结构数值模拟

针对螺旋波等离子体放电机理，开展了多种工质条件下的螺旋波放电等离子体内波场结构数值模拟研究。计算发现:氦气等离子体的Er分量在径向边界处的峰值更为突出，有利于等离子体在径向的输运，波电场径向分量决定了电流密度径向分量在内部的表现。在0.266 Pa和1.064 Pa两种气体压强条件下，通过波场结构验证了气压对于波阻尼影响的结论。波场结构是螺旋波在等离子体内传播以及能量沉积的微观体现，研究螺旋波波场结构是揭示其高电离效率的重要途径。初步探索了功率耦合机制，为实验系统优化及实验方案设定奠定理论基础。     

中小外贸企业经营机制创新分析

经营机制创新是中小型外贸企业摆脱困境的必由之路。针对目前面临的主要问题，从外部环境及企业自身经营机制缺陷方面对中小型外贸企业生存环境进行分析，并从实现经营机制创新角度探讨改善现状的方法，力图找出中小型外贸企业经营机制创新的突破点。     

柱状金属微粒-电介质复合材料的等效介电常数

基于介质圆柱电磁散射理论和等效介质理论，导出了金属柱微粒-电介质复合材料的等效相对介电常数的表达式。数值结果表明：入射波频率低于某一频率或金属柱掺料的体积分数增大到一定数值时，复合材料的等效相对介电常数实部会变为负数。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

CO2脉冲激光与气体相互作用实验

实验研究采用波长为10.6μm的CO2脉冲激光器,N2,He,CO2等三种纯净气体及上述气体的相互混合气作为推进工质时,通过实验舱内的冲击摆装置对抛物形光船获得的冲量耦合系数Cm进行了测量。实验发现气体工质的获得的冲量耦合系数Cm随气压增高而增大,通常气体工质的分子量越大,冲量耦合系数Cm越大;在低气压条件下,分子量较大的气体所占的比例越高,混合气获得的冲量耦合系数Cm越高;在高气压条件下,混合气体工质获得的冲量耦合系数与混合气体的种类及比例密切相关。     

加入增益介质的F-P干涉仪和衍射光栅光谱仪的光谱特性对比

对加入增益介质的F—P干涉仪的光谱特性与衍射光栅光谱仪的光谱特性作了定量对比。结果表明，加入增益介质的F—P干涉仪的光谱特性要明显优于衍射光栅光谱仪的光谱特性。这为光谱精细结构分析提供了更为理想的选择。     

中介时序逻辑系统MTL的模型论性质

时序逻辑作为一种把时间概念直接引入其形式系统的逻辑系统,它具有较强的表达能力,近年来在计算机科学领域获得了广泛的应用.基于中介逻辑对时序逻辑进行多值扩充,建立了一种中介时序逻辑系统MTL(Medium Temporal Logic).讨论了它的形式系统和语义解释,但未论及其完备性.本文对MTL系统作进一步的讨论.在一可传结构下,讨论了它的可传、连通和过滤等模型论性质,为进一步讨论MTL系统的完备性作了理论上的准备.     

基于中介逻辑的多模态逻辑系统

多模态逻辑作为模态逻辑的扩充，是模态逻辑进行时态和动态扩充的基础。中介逻辑是一个新的逻辑系统，自创立后得到了很大发展，并在数理逻辑及计算机科学领域中得到广泛应用。为将中介逻辑进行时态和动态扩充，本文构造了一种基于中介逻辑的多模态逻辑系统ＭＭＫ，讨论了它的推理规则和语义解释，并证明了ＭＭＫ的可靠性和完备性，在此基础上给出了一种基于中介逻辑的时态逻辑系统ＭＴ，对它的可靠性和完备性进行了讨论。最后，分析了相应的经典多模态逻辑系统与ＭＭＫ系统及经典时态逻辑系统和ＭＴ系统之间的关系。     

中介公理集合论系统与经典公理集合论系统的关系——形式证明部分

在中介公理集合论系统（ＭＳ）中重新定义了良集的概念，讨论了它的性质。证明良集完全满足经典公理集合论系统（ＺＦＣ－：ＺＦＣ系统中去掉正则公理）的全部公理，且其配套的逻辑系统恰为中介逻辑的二值子系统ＦＩ＊ＭＬ，说明整个经典数学也能奠基于ＭＳ之上，从而最终回答了中介数学与经典数学的包含关系问题。