复合材料(结构)粘接质量检测的错位散斑技术

系统地分析了错位散斑条纹的形成机制,并在多种条件(真空荷载、热流荷载、音频扫描荷载等)下对各种复合材料结构粘接质量进行了检测及评估,可检测出厚1mm层合板内直径>5mm的缺陷,夹芯结构内直径>10mm的缺陷;对于包覆层结构可检测出深度在12mm以内、直径>5mm的空隙脱粘缺陷,而零粘接力缺陷也能检测出厚度为2mm、直径>30mm的缺陷。同时引入相移技术使错位散斑检测方法不仅具备非接触、高精度和全场实时观测等特点,而且也实现了复合材料结构粘接质量的定量无损检测。     

金属膜片贮箱膜片变形的数值模拟与失效分析

根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。在一定条件下，模拟了贮箱金属膜片的变形翻转过程，分析其翻转的特点，以及变形过程中表面压力、顶点径向位移和卷边处应力的变化，并给出了膜片失效原因。研究表明，数值模拟与试验结果较为吻合，所建分析模型合理。     

固体药柱的大变形分析

采用物质描述法，选择初始构形作为参考构形，导出以Ｋｉｒｃｈｈｏｆｆ应力和Ｇｒｅｅｎ应变表示的粘弹性大变形本构关系和有限元方程，利用ＴｏｔａｌＬａｇｒａｎｇｉａｎ增量法进行求解，取得了满意的结果。     

铣削加工工艺力学机理研究

结构件数控铣削加工技术广泛应用于航空航天工业中。铣削加工中,不合理工艺参数下的切削力会引起较大刀具-工件变形及加工颤振,极大影响着加工精度和质量。深入研究工艺过程的力学机理,进而采用建模仿真技术来优选工艺参数,对高效高精度加工技术的实现具有重要意义。本研究围绕切削力建模、动力学建模与颤振稳定性分析以及变形误差预测与控制技术等相关工作进行介绍。     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.     

钛合金/不锈钢网的扩散连接

探讨了钛合金／不钢网扩散连接的可行性,确定了直接扩散连接条件下的最佳工艺参数,分析了影响扩散连接的主要因素及接头微观形态。针对实际构件,深入分析了加压方式和变形率的关系,并提出了控制变形量得到无变形接头的方法。     

变形反射面天线的效率

基于场相关原理,导出了适用于反射面缓变变形的反射面天线效率表达式,并讨论了它与Rutz 公式的关系,为反射面天线的设计提供了更为准确的电磁与结构关系式。     

High precision and efficiency robotic milling of complex parts:Challenges,approaches and trends

Due to the advantages of large workspace, low cost and the integrated vision/force sensing, robotic milling has become an important way for machining of complex parts. In recent years,many scholars have studied the problems existing in the applications of robotic milling, and lots of results have been made in the dynamics, pose planning, deformation control etc., which provides theoretical guidance for high precision and high efficiency of robotic milling. From the perspective of complex parts r...     

航天器贮箱用钛制隔膜变形过程的数值模拟

基于弹塑性大位移非线性有限元理论,建立航天器贮箱用钛制隔膜变形的有限元分析模型,并对有限元软件进行二次开发,首次通过编辑子程序实现了隔膜厚度的渐进变化及失效过程中隔膜的自动开裂,准确仿真出了隔膜在翻转变形过程中发生的褶皱、偏心与破裂等失效行为。依据此模型,分别对075 mm等厚隔膜及055~08 mm变厚隔膜的翻转过程进行了仿真,并对其翻转规律及失效机制进行了分析。研究发现,等厚隔膜在翻转过程中易产生褶皱,渐变壁厚隔膜翻转性能明显优于等厚隔膜,能克服褶皱的产生,但变厚隔膜在变形过程中易产生偏心。通过与试验对比表明,数值仿真能准确预测隔膜的变形规律与失效模式,为后续优化厚度分布提供了可靠的依据。