详细化学反应机理对预混丙烷钝体熄火模拟影响

航空发动机熄火预测是重要关键问题之一，湍流和化学反应的非线性相互作用使预测非常困难。本文采用大涡模拟（LES）对湍流进行高精度模拟，采用概率密度函数输运方程湍流燃烧模型（TPDF）耦合JL4、Z66和H73三种化学反应机理，对预混丙烷钝体熄火现象和规律进行研究。JL4的反应机理最简单，反应释热快，局部放热高，火焰宽度大，火焰两侧温度梯度大，燃烧更加趋于稳定，无法模拟出熄火状态。H73机理绝热火焰温度低，火焰温度低，回流区中部OH含量高；在近熄火状态，大量CO被氧化，释放热量过高导致无法模拟出熄火现象。Z66机理可以模拟出火焰正常状态，在低当量比下也可以模拟出熄火状态。本文算例中，局部Da数大于1的区域超过35%则会发生熄火。     

Development and performance evaluation of tropospheric scintillation model on Ku-band satellite link over Akure,Nigeria

Existing amplitude scintillation prediction models often perform less satisfactorily when deployed outside the regions where they were formulated. This necessitates the need to evaluate the performance of scintillation models developed in one region using data data from other regions while documenting their relative errors. Due to its variation with elevation angle, frequency, other link parameters and meteorological factors, we employed three years (January 2016 to December 2018) of concurrently measured satellite radio beacons and tropospheric weather parameters to develop a location-based amplitude scintillation prediction model over the Earth-space path of Akure (7.17^oN, 5.18^oE), South-western Nigeria. The satellite beacon measurement used Tektronix Y400 NetTek Analyzer at 1 s integration time while meteorological parameters, namely; temperature, pressure and relative humidity were measured using Davis Vantage Vue weather station at 1 min integration time. Comparative study of the model’s performance with nine (9) existing scintillation prediction models indicates that the best and worst performing models, in terms of root mean square error (RMSE), are the Statistical Temperature and Refractivity (STN) and direct physical and statistical prediction (DPSP) models with values 11.48 and 51.03 respectively. Also, worst month analysis indicates that April, with respective enhancement and fade values of 0.88 and 0.90 dB for 0.01% exceedance, is the overall worst calendar month for amplitude scintillation.     

Optimization of bits allocation and path planning with trajectory constraint in UAV-enabled mobile edge computing system

In this paper, an Unmanned Aerial Vehicle (UAV) enabled Mobile Edge Computing (MEC) system is studied, in which UAV acts as server to offer computing offloading service to the Mobile Users (MUs) with limited computing capability and energy budget. We aim to minimize the total energy consumption of MUs by jointly optimizing the bit allocation for uplink, computing at the UAV and downlink, along with the UAV trajectory in a unified framework. To this end, a trajectory constraint model is employed to avoid sudden changes of velocity and acceleration during flying. Due to high-order information in use, we lead to a more reasonable nonconvex optimization problem than prior arts. An Alternating Direction Method of Multipliers (ADMM) method is introduced to solve the optimization problem, which is decomposed into a set of easy sub-problems, to meet the requirement on the efficiency in edge computing. Numerical results demonstrate that our approach leads a smoother UAV trajectory, significantly save the energy consumption for UAV during flying.     

一种针对局部结构的有限元模型修正方法

针对实际结构有限元模型（FEM）的建模误差通常仅存在于局部区域，提出了一种对局部结构单独进行模型修正的方法。首先，根据频响函数（FRF）解耦理论得到由残余结构频响函数与包含待修正参数的局部结构动刚度所重构的整体结构频响函数的拟合值，然后通过迭代优化使其与测量值的残差最小化，从而得到参数的极大似然估计。在此基础上，将残差关于参数的灵敏度以局部结构动力学矩阵表示，建立了模型修正的基本方程，利用整体结构的测试数据即可直接对分离出来的局部结构进行模型修正。最后，对喷气式飞机和三角机翼飞机分别进行了数值模拟和实验研究，验证了所提方法的可行性和有效性。结果表明，所提方法可以成功地用于仅局部区域含有建模误差的实际结构有限元模型的修正，修正后的有限元模型的动态特性与实际结构有较好的一致性。     

相关函数在涡流检测信号提取分析中的应用

为降低涡流检测信号处理的硬件复杂程度及提升后续数据分析处理灵活度，在不借助复杂硬件自平衡技术电路前提下，在LABVIEW图形化软件平台中设计了相关函数算法程序，对示波器MDO4024C所采集的原始交流电桥信号及电桥激励信号分别进行自相关及互相关运算去噪，提取分析不锈钢管不同位置的涡流信号的幅值及相位，最后再将检测信号在极坐标图中分析显示。实验结果表明，这一方法可有效实现对不锈钢管缺陷涡流信号的去噪及特征信号提取。     

独立函数的表达式及完备性

给出独立函数的逻辑表达式和递推关系式。证明了独立函数系的线性完备性。讨论逻辑函数关于独立函数系的展开式、不同极性独立函数系展式之间的关系,以及与Reed-Muller展式之间的关系。这些问题的结论为建立新型的通用逻辑模块奠定了理论基础。     

任意波发生器静态特性的评价

介绍了任意波发生器的主要静态特性指标、校准方法及实现过程。通过一组实验．获得了实际校准结果，并对校准中需要注意的问题进行了讨论。所述方法涉及的静态特性内容比较全面。具有足够的测量准确度、分辨力和稳定性。可用于任意波发生器的静态指标评价和计量。     

一种基于事件序列的故障树最小割集算法

在系统分析故障树最小割集各种求解算法的基础上，提出了一种故障树事件序列的数据结构，并针对该数据结构，设计了一种高效的故障树最小割集求解算法，并对其替换子算法、复制子算法和消减子算法进行了形式化描述。算法可有效降低最小割集生成中的“组合爆炸”问题，实验结果表明算法具有较好的计算性能。     

对策论在雷达电子战效能评估中的应用

介绍了对策论的基本内容和分析方法,包括对策论所涉及问题的要素和分类.指出了对策论在雷达电子战效能评估中应用的可行性和必要性.分析了电子对抗博弈双方采取不同对抗技术措施的得益矩阵,并在此得益矩阵的基础上,重点研究了对策论在电子对抗效能评估过程中的应用.     

平面形状误差分离方法的比较分析

就十种典型的精密平面形状误差测量－分离方法的权函数及其零点，作了分析比较。按形状误差谐波抑制最小准则，论证了五点式正交逐次三点法、九点式正交逐次三点法、复合三点法、不对称二维混合法和不对称四点法优于其他方法，不对称四点法则较为理想。