塑性动态断裂过程中梁的塑性铰转动因子的确定方法

运用理论分析方法和实测试验方法，探讨了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律，提出了断裂过程中塑性铰几何转动因子的概念及其确定方法，并以３点弯曲梁理论分析解为例，计算了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律。该计算结果与３点弯曲梁动态断理解实验实测相一致。理论分析进一步明确了梁的塑性铰转动因子具有几何与物理两种不同的本质含意，并可直接用于修正梁的塑性动态断裂的理论分析解。     

丁羟弹性体的交联密度

简要介绍了丁羟弹性体交联密度的表征参数、实验方法及其在丁羟推进剂研究中的实际应用。     

弹性机翼对机载导弹子惯导系统导航精度的影响分析

弹性机翼的振动及杆臂效应会引起机载导弹加速度计输出中的附加干扰加速度，从而引起导弹子惯导系统的导航参数误差。本文通过建立机翼弹性振动模型及惯导误差传播模型，从理论上分析了机翼弹性振动及杆臂效应对子惯导系统导航精度的影响，并进行了计算机仿真研究。     

无机填料浓度对端羟基聚丁二烯弹性的影响

本文研究了无机填料NH_4Cl0_4(AP)的浓度对端羟基聚丁二烯(HTPB)单轴拉伸的应力-应变特性、拉伸强度、断裂伸长和拉伸模量的影响.根据Mooney-Revilin方程和非高斯链的弹性统计理论,提出了填充弹性体的半经验交联-缠结-非高斯链三相网络模型.理论计算与实验结果基本一致.用扫描电子显微镜观察了试样断裂面的形态,证实了实验的结论.     

挠性陀螺接头精密电加工技术研究

为解决挠性陀螺中接头细颈在传统的加工方法中由于切削力作用及工件-刀具变形、实际精度难以控制的难题，采用精密电加工工艺，配合以在位检测和特殊装夹、定位装置，成功实现了接头细颈的电火花加工（EDM），检测数据达到设计要求，证明该技术途径可行。     

缝合复合材料弹性常数细观力学模型的分析比较

对近几年来公开发表的缝合复合材料弹性常数的细观力学模型进行了分析比较。通过计算对比了铺层纤维面内弯折、正弦波状弯曲、多项式描述纤维弯曲三个典型的缝合复合材料弹性常数的细观力学分析模型。结果表明,采用面内纤维弯折假设的弹性常数分析模型对缝纫参数的改变不敏感;采用面内纤维弯曲假设的模型对缝纫参数改变敏感,不同模型得到的弹性常数随缝纫参数变化趋势几乎是相同的。但是,假设纤维在针脚附近只有部分纤维发生弯曲比假设纤维全部发生弯曲得到的结论更合理。     

A novel surrogate modeling strategy of the mechanical properties of 3D braided composites

In this paper, a surrogate-based modeling methodology is developed and presented to predict the elastic properties of three dimensional (3D) four-directional braided composites. Using this approach, the prediction process becomes feasible with only a limited number of training points. The surrogate models constructed using Finite Element (FE) method and Diffuse Approximation, reduce the computational time and cost for preparing experimental samples. In the FE model, multiscale method is applied to couple the computations of elastic properties at microscale and mesoscale. Subsequently, a parametric study is performed to analyze the effects of the three design parameters on the elastic properties. Satisfactory results are obtained via the surrogate-based modeling predictions, which are compared with the experimental measurements. Moreover, the predictions obtained from surrogate models concur well with the FE predictions. This study orients a new direction for predicting the mechanical properties based on surrogate models which can effectively reduce the sample preparation cost and computational efforts.     

弹性体运载火箭建模及控制器设计

考虑运载火箭飞行过程中的弹性振动特性,对运载火箭进行全量动力学建模以及控制器设计。首先将运载火箭考虑为一维梁模型并建立全量动力学模型,分别引入自适应滤波姿态控制算法和H_2范数鲁棒增益调度控制算法设计控制器。仿真结果表明:在考虑舵机非线性情况下两种控制方法均能够满足精度要求,在具有较大外部扰动情况下,鲁棒增益调度控制算法相较于自适应滤波算法具有较强的鲁棒性。     

Analyses toward factors influencing sealing clearance of a metal rubber seal and derivation of a calculation formula

Sealing clearance is a key factor for a metal rubber seal’s sealability. The expansion coef-ficient and expansion deformation in the radial direction of metal rubber have been obtained through a thermal expansion experiment of metal rubber. The influence of the elastic modulus to the sealing clearance has been analyzed theoretically. By combining the temperature and elasticity factors of metal rubber with the elastic mechanics theory, the calculation formula of the sealing clearance has been derived, and the values of the sealing clearance and the leakage rate in certain working conditions have been calculated. Experimental results are consistent with calculation results in a high degree. The calculation formula of the sealing clearance can explain the influences of the temperature and elastic modulus factors of metal rubber on the sealing clearance. It can pro-vide guidance for the study of sealing mechanism of metal rubber seals.     

关于适当布置构造柱以提高墙体承载力的探讨

针对当前七、八层砖混结构住宅在不增加墙体厚度的前提下，通过适当布置构造柱，来提高墙体承载力，因而达到增大使用面积的目的。