基于LabVIEW平台的数字抽取滤波器的设计与应用

介绍了基于LabVIEW平台的数字抽取滤波器的设计。该方法是对高采样率的数据进行低通数字滤波，然后对结果用1／K倍重新采样，将数字信号频带压缩K倍，从而实现动态测试较大的动态范围要求和划分频带要求，数字抽取滤波器的设计包含调制，数字滤波和抽取三方面，LabVIEW是一种基于图形编程语言（G语言）的开发环境，采用交互界面设计，模块化编程，该滤波器也是作者正在研制的动态测试分析虚拟仪器的一个重要组成部分。本文给出了在LabVIEW平台上所进行数字抽取滤波器的设计原理，仿真结果和在动态数字信号分析中的应用。     

基于冗余伪观测的自适应滤波算法

现有的二阶互差分(SOMD)算法能够给出与状态估计误差解耦的观测噪声协方差估计，但是需要满足冗余测量的条件，但这一条件往往难以满足。 针对这一问题，提出了一种利用状态预测值构造相邻2个时刻伪观测的方法，将原SOMD算法扩展到具有单测量的系统中。使用目标跟踪问题对该算法的有效性进行验证。仿真结果表明，当采样周期较小时，该算法能够忽略状态估计误差的影响并给出较准确的观测噪声方差，在精度和鲁棒性方面优于其他参考算法。     

ESPRIT算法在单快拍阵列信号中的应用

ESPRIT算法利用旋转不变技术估计信号参数,是近年来提出的阵列信号处理理论的一个新领域,它具有高分辨率、高精度、不需空间搜索等优点。单快拍总被当作相干信号处理,本文采用了Teoplitz结构协方差矩阵估计,起了空间平滑作用,所以可以估计相于信号源的波达方向(DOA),与标准空间平滑协方差矩阵估计相比较,Teoplitz协方差阵估计在总体上提高了信噪比,并且不牺牲阵列孔径。 计算机模拟结果表明,基于Teoplitz结构协方差矩阵的TLS-ESPRIT算法在20dB信噪比下,可以分辨出相隔0.2瑞利波束宽度的空间信号。     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

基于加速度测量的智能桁架结构振动主动控制

加速度传感器具有频带宽、结构简单、重量轻等优点而获得了广泛使用，因此研究基于加速度测量的结构控制系统具有较大的实用价值。文中的只能获得加速度时，采用模态滤波器技术实现从物理加速度响应解耦得到单模态加速度的响应。然后改变Ｌｕｅｎｂｅｒｇｅｒ观测器的结构形式，从模态加速度响应观测得到模态们移和模态速度响应。基于模态滤波器和最优控制理论，采用独立模态空间控制策略，实现了具有密集模态的三维柔性智能桁架结构     

基于混合卡尔曼滤波器组故障传感器定位方法

为了在发动机性能蜕化与传感器故障并存的情况下实现故障传感器的定位与部件蜕化情况的估计,并实现故障诊断基准数据的修正,构建了1种包含了机载模型与线性卡尔曼滤波器的组合结构混合卡尔曼滤波器组。该卡尔曼滤波器组能够在之前所描述的故障/蜕化耦合情况下定位故障传感器,并得到较为准确的部件蜕化估计结果。为了验证了混合卡尔曼滤波器组的有效性,进行了相关仿真。仿真结果表明:混合卡尔曼滤波器组能够在发动机动态过程中遭遇传感器故障与部件蜕化并存的情况下完成故障定位与蜕化估计。     

Lateral Flight Technical Error Estimation Model for Performance Based Navigation

Flight technical error (FTE) combined with navigation system error (NSE) is the main part of total system error (TSE) in performance based navigation (PBN).The implementation of PBN requires pre-flight prediction and en-route short-term dynamical prediction of the TSE.Once the sum of predicted lateral FTE and NSE is greater than the specified PBN value,the PBN cannot operate.Thus,accurate modeling and thorough analysis of lateral FTE are indispensible.Multiple-input multiple-output (MIMO) lateral track control system of a transport aircraft is designed using linear quadratic Gaussian and loop transfer recovery (LQG/LTR) method,and the lateral FTE of a turbulence disturbed approach operation is analyzed.The error estimation mapping function of latera FTE and its bound estimation algorithm are proposed based on singular value theory.According to the forming mechanism of lateral FTE,the algorithm considers environmental turbulence fluctuation disturbance,aircraft dynamics and control system parameters.Real-data-based Monte-Carlo simulation validates the theoretical analysis of FTE.It also shows that FTE is mainly caused by turbulence fluctuation disturbance when automatic flight control system (AFCS) is engaged and would increase with escalating environmental turbulence intensity.     

伪距解除相关法在GPS/SINS紧组合系统中的应用研究

介绍了伪距解除相关法的原理 ,设计了一种加权平均跟踪误差估计器 ,用以估计 GPS接收机码环跟踪误差。研究结果表明 ,与未对伪距测量值进行修正时相比 ,应用伪距解除相关技术可以减小组合系统的导航误差 ,提高系统的导航精度     

IIR数字滤波器的序列约束Chebyshev设计方法

 进行无限冲击响应(IIR)数字滤波器的无约束Chebyshev设计时,得到的滤波器幅值响应通常在过渡带存在明显过冲现象,且通带边缘的群延迟误差较大。本文提出一种序列约束Chebyshev(SCC)方法,在通带和阻带最大频率响应(FR)误差小于某给定值ρ的条件下,使过渡带频率响应误差(相对某个具有单调幅值特性的过渡响应函数)的Chebyshev模最小,并通过收缩和对分找出ρ的最小值。该方法不但可以使通带和阻带最大频率响应误差尽可能小,还能减小过渡带幅值响应的过冲以及带边群延迟误差。仿真实例表明了该方法的有效性。     

Low C/N_0 Carrier Tracking Loop Based on Optimal Estimation Algorithm in GPS Software Receivers

Suppressing jitter noises in a phase locked loop(PLL) is of great importance in order to keep precise and continuous track of global positioning system(GPS) signals characterized by low carrier-to-noise ratio(C/N0).This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers.After reviewing the optimal-bandwidth-based traditional second-order PLL,a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises.Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data.Compared to the traditional second-order PLL,this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL.The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0.010 69 cycle to 0.007 63 cycle,and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ±17° and ±5Hz as against ±25° and ±15 Hz by the traditional PLL.