热处理和冷变形对Ti—Ni合金非线性超弹性的影响

本文利用拉伸试验系统地研究了冷变形量、热处理工艺对Ｔｉ－４９．８％（原子分数）Ｎｉ合金非线性超弹性的影响。研究表明，不同冷变形量丝材经７２３Ｋ，０．５ｈ退火处理后，冷变形量较大的丝材（大于２０％）经一定次数的应力－应变循环处理后，可获得完全的非线性超弹性，而冷变形量较小的丝材，即使经过多次应力－应变循环处理也难以获得完全的非线性超弹性。经同一温度退火处理的不同冷变形量丝材，冷变形量越大，获得完全非     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

Propagation of non-linear ion-sound pulses in dusty plasma waveguides

There are a lot of objects in space associated with dusty plasma inclusions. Such inclusions may bear a prolonged shape and behave as waveguides for ion-sound waves. In the case of space plasmas, the dust particles can possess both negative charge, due to electron attachment, and positive one, due to photoionization. In this paper the propagation of linear and non-linear ion-sound wave pulses in the dusty plasma waveguides, possessing positive charge, is studied. It has been demonstrated that non-linear dynamics of baseband pulse propagation in plasma waveguide possesses essentially non-solitonic behavior. Namely, propagation of a long ion-sound pulse leads to an excitation of a shock-like wave but not a stable localized nonlinear pulse. Also, when a Korteveg–de Vries (KdV) soliton is incident onto the dusty plasma waveguide, some part of the soliton energy is captured by the waveguide and transformed into a multi-pulse structure. Additionally, an interaction of dusty plasma inclusions with KdV soliton can lead to the occurrence of transverse instabilities of the soliton and its eventual destruction.     

空间相机热平衡试验温度预测方法改进及应用

为实现对航天器热平衡试验平衡温度的预测,建立了热平衡温度预测的方程式,对影响预测结果的各参数进行了分析。首先,由节点网络法推导出平衡温度表达式,介绍了其基于非线性最小二乘法的求解过程,建立了平衡温度的迭代方程;其次,结合大量的试验数据,对影响迭代结果的3个因素进行了统计分析,并最终确定了各因素的合理取值范围;最后,利用温度预测程序对某空间相机热平衡试验中低温工况的平衡温度进行了预测,并与试验结束后的结果进行了对比。结果表明,预测温度与试验数据的误差为±1℃（在3%之内）,满足精度要求,对热平衡温度准确的预测有效的缩短了试验时间,节省试验费用。     

非线性添加剂对聚酰亚胺介电性能的影响

采用非线性添加剂对聚酰亚胺进行电导率改性,研究了改性前后介质的电导特性及其他介电性能,以及添加剂含量对聚酰亚胺复合介质材料电导特性的影响。结果表明,改性后的复合试样的体电导率随添加剂质量分数的变化而变化,当质量分数小于5%时,电导率略有下降,大于5%时显著上升。改性后的复合介质材料的非线性电导率特性变化显著。     

中继卫星系统仿真软件设计与应用*

设计开发中继卫星系统仿真软件,并针对理想信道条件、I/Q幅相不平衡、幅频特性、群时延、相位噪声、功放饱和条件、非线性信道条件这七种信道,仿真16QAM和16APSK的误码率性能,并对仿真结果进行分析。利用仿真平台得出的非线性信道条件下误码率需求与所需信噪比之间的关系,可以作为完善系统技术指标的重要依据,为中继卫星系统后续建设和应用提供重要参考。     

大厚度扩散焊NLU成像检测技术

针对钛合金大厚度扩散焊,基于非线性超声(Non-linear ultrasonic,NLU)原理,构建了一种NLU成像方法和检测系统,设计制备了不同的大厚度扩散焊试件,进行了NLU成像检测试验分析。检测结果表明,采用NLU成像检测方法,可实现钛合金大厚度扩散焊的超声可视化检测,最大检测厚度可达70mm。     

高阶矩谱分析与空间等离子体非线性相互作用识别

利用高阶矩统计分析方法对ＡＵＲＥＯＬ－３卫星观测数据进行分析处理，所涉及的信号分别为ＥＬＦ频率范围内的电场扰动Ｅｈ（ｔ）和等离子体密度波动δＮｅ／ｎｅ（ｔ），处理结果表明：利用高阶矩谱分析方法可以很好地识别空间等离了波－粒相互作用过程中的非线性成分     

稳态消谐法在零序电阻消除铁磁谐振分析中的应用

唯一稳态消谐法是近年出现的消除非线性系统谐振新的分析方法。该方法的基本思想是如果非线性系统存在一个非谐振的正常解,并且该系统具有唯一的稳态,则此时对应的条件就是系统不发生谐振的条件。将这一方法应用在中性点接地电力系统铁磁谐振的分析中,以向量比较原理为工具,得到相应的消谐条件。结果表明,消除谐振的条件可以用一个常数矩阵的HURWITZ条件来决定,并用数值模拟进行验证,表明结果是正确的,同时也说明唯一稳态消谐法的有效性。