Searching for life on Mars: selection of molecular targets for ESA's aurora ExoMars mission

The European Space Agency's ExoMars mission will seek evidence of organic compounds of biological and non-biological origin at the martian surface. One of the instruments in the Pasteur payload may be a Life Marker Chip that utilizes an immunoassay approach to detect specific organic molecules or classes of molecules. Therefore, it is necessary to define and prioritize specific molecular targets for antibody development. Target compounds have been selected to represent meteoritic input, fossil organic matter, extant (living, recently dead) organic matter, and contamination. Once organic molecules are detected on Mars, further information is likely to derive from the detailed distribution of compounds rather than from single molecular identification. This will include concentration gradients beneath the surface and gradients from generic to specific compounds. The choice of biomarkers is informed by terrestrial biology but is wide ranging, and nonterrestrial biology may be evident from unexpected molecular distributions. One of the most important requirements is to sample where irradiation and oxidation are minimized, either by drilling or by using naturally excavated exposures. Analyzing regolith samples will allow for the search of both extant and fossil biomarkers, but sequential extraction would be required to optimize the analysis of each of these in turn.     

Beagle 2: a proposed exobiology lander for ESA's 2003 Mars Express mission.

The aim of the proposed Beagle 2 small lander for ESA's 2003 Mars Express mission is to search for organic material on and below the surface of Mars and to study the inorganic chemistry and mineralogy of the landing site. The lander will have a total mass of 60kg including entry, descent, and landing system. Experiments will be deployed on the surface using a robotic arm. It will use a mechanical mole and grinder to obtain samples from below the surface, under rocks, and inside rocks. Sample analysis by a mass spectrometer will include isotopic analysis. An optical microscope, an X-ray spectrometer and a Mossbauer spectrometer will conduct in-situ rock studies.     

An imaging gas scintillation proportional counter coupled to a channel multiplier array for application in cosmic X-ray spectroscopy

The development of an imaging gas scintillation proportional counter which utilises a channel multiplier array as the readout element is discussed. Preliminary experimental results and theoretical considerations indicate that spatial and energy resolutions of below 500 μm and 8% respectively should be achievable at an X-ray energy of 6 keV.     

Decentralized reduced-order filters

Continuous and discrete methods of designing simple reduced-order local filters within a large-scale network are suggested. The filters are designed to estimate only the local variables of interest and not the entire state vector. The method has the advantage that one need not know the mathematical models of the subsystems generating the interconnection variables. The order of the filter can be small enough so that there is no computational burden associated with the filter. The disadvantage of the method is that performance is lost by using a reduced-order filter instead of a full-order filter. An example that demonstrates one application in the aerospace industry is presented     

Temporal variation in the new proton belt created in March 1991 observed using the CREAM & CREDO experiments.

The Cosmic Radiation Environment & Activation Monitor (CREAM) was carried in high inclination (57.1 degrees) orbits on Shuttle missions STS-48 in September 1991 (altitude 570 km) and STS-53 (altitude 325 to 385 km) in December 1992. On both occasions the instrument observed an excess of counts due to protons of greater than 30 MeV in energy in the region off of South Africa where field lines of L=2.5 intersect low earth orbit. Meanwhile the Cosmic Radiation Environment and Dosimetry Experiment (CREDO) carried to 840 km, 98.7 degrees orbit on UOSAT-3 has continued to sample the high field portions of the L-shells around L = 2.5 from April 1990 until the present time. When careful subtraction of cosmic-ray contributions is made it can be seen that the March 91 enhancement persisted for approximately 8 months and explains the STS-48 observation. There would appear to have been a further increase produced by the 31 October 1992 flare event and seen by STS-53.     

In situ microbial detection in Mojave Desert soil using native fluorescence

We report on the use of a portable instrument for microbial detection in the Mojave Desert soil and the potential for its use on Mars. The instrument is based on native fluorescence and employs four excitation wavelengths combined with four emission wavelengths. A soil dilution series in which known numbers of Bacillus subtilis spores were added to soil was used to determine the sensitivity of the instrument. We found that the fluorescence of the biological and organic components of the desert soil samples studied can be as strong as the fluorescence of the mineral component of these soils. Using the calibration derived from B. subtilis spores, we estimated that microbial content at our primary sampling site was 10(7) bacteria per gram of soil, a level confirmed by phospholipid fatty acid analysis. At a nearby site, but in a slightly different geological setting, we tested the instrument's ability to map out microbial concentrations in situ. Over a ～50 m diameter circle, soil microbial concentrations determined with the B. subtilis calibration indicate that the concentrations of microorganisms detected varies from 10(4) to 10(7) cells per gram of soil. We conclude that fluorescence is a promising method for detecting soil microbes in noncontact applications in extreme environments on Earth and may have applications on future missions to Mars.     

Immunological detection of small organic molecules in the presence of perchlorates: relevance to the life marker chip and life detection on Mars

The proposed ExoMars mission, due to launch in 2018, aims to look for evidence of extant and extinct life in martian rocks and regolith. Previous attempts to detect organic molecules of biological or abiotic origin on Mars have been unsuccessful, which may be attributable to destruction of these molecules by perchlorate salts during pyrolysis sample extraction techniques. Organic molecules can also be extracted and measured with solvent-based systems. The ExoMars payload includes the Life Marker Chip (LMC) instrument, capable of detecting biomarker molecules of extant and extinct Earth-like life in liquid extracts of martian samples with an antibody microarray assay. The aim of the work reported here was to investigate whether the presence of perchlorate salts, at levels similar to those at the NASA Phoenix landing site, would compromise the LMC extraction and detection method. To test this, we implemented an LMC-representative sample extraction process with an LMC-representative antibody assay and used these to extract and analyze a model sample that consisted of a Mars analog sample matrix (JSC Mars-1) spiked with a representative organic molecular target (pyrene, an example of abiotic meteoritic infall targets) in the presence of perchlorate salts. We found no significant change in immunoassay function when using pyrene standards with added perchlorate salts. When model samples spiked with perchlorate salts were subjected to an LMC-representative liquid extraction, immunoassays functioned in a liquid extract and detected extracted pyrene. For the same model sample matrix without perchlorate salts, we observed anomalous assay signals that coincided with yellow coloration of the extracts. This unexpected observation is being studied further. This initial study indicates that the presence of perchlorate salts, at levels similar to those detected at the NASA Phoenix landing site, is unlikely to prevent the LMC from extracting and detecting organic molecules from martian samples.     

Secondary radiation environments in heavy space vehicles and instruments.

Secondary radiations produced by the interactions of primary cosmic rays and trapped protons with spacecraft materials and detectors provides an important, and sometimes dominant, radiation environment for sensitive scientific instruments and biological systems. In this paper the success of a number of calculations in predicting a variety of effects will be examined. The calculation techniques include Monte Carlo transport codes and semi-empirical fragmentation calculations. Observations are based on flights of the Cosmic Radiation Environment and Activation Monitor at a number of inclinations and altitudes on Space Shuttle. The Shuttle experiments included an active cosmic-ray detector as well as metal activation foils and passive detector crystals of sodium iodide which were counted for induced radioactivity soon after return to earth. Results show that cosmic-ray secondaries increase the fluxes of particles of linear energy transfer less than 200 MeV/(gm cm-2), while the activation of the crystals is enhanced by about a factor of three due to secondary neutrons. Detailed spectra of induced radioactivity resulting from spallation products have been obtained. More than a hundred significant radioactive nuclides are included in the calculation and overall close agreement with the observations is obtained.     

The X-ray spectrometer experiment on the first spacelab flight

The First Spacelab Flight - scheduled for September 1983 - will carry a multidisciplinary payload intended to demonstrate that valuable scientific results can be achieved with such short duration missions. The payload complement includes a spectrometer to undertake observations of the brighter cosmic X-ray sources. The primary scientific objectives of this experiment are the study of detailed spectral features in cosmic X-ray sources and their associated temporal variations over a wide energy range from about 2 keV up to 80 keV. The instrument based on the gas scintillation proportional counter, will have an effective area of some 180 cm² with an energy resolution of ～ 9% FWHM at 7 keV. The key performance parameters of the instrument, which include calibration results and the sensitivity of the planned observations, are discussed.