AC/DC converter topologies for the Space Station

A new class of AC/DC converter topologies (Type-1 converters) is described, suitable for use in an advanced single-phase sine-wave voltage, high-frequency power distribution system, of the type that was proposed for a 20 kHz Space Station primary electrical power distribution system. The converter comprises a transformer, a resonant network, a current controller, a diode rectifier, and an output filter. The input AC voltage source is converted into a sinusoidal current source using the resonant network. The output of this current source is rectified by the diode rectifier and is controlled by the current controller. The controlled rectified current is then filtered by the output filter to obtain a constant voltage across the load. Three distinct converter topologies, Type-1A, Type-1B, and Type 1-C, are described, and their performance characteristics are presented. All three types have a close-to-unity rated power factor (greater than 0.98), low total harmonic distortion in input current (less than 5%), and high conversion efficiency (greater than 96%)     

Effect of Dimensions on the Efficiency of Radiant Energy Cells

This paper deals with the enhancement of the quantum efficiency and photovoltaic energy conversion efficiency of a p-n semiconducting cell by optimizing the dimensions of the cell. Based on the Shockley-Read statistics a general expression for the quantum efficiency of monochromatic incident radiant energy photons has been derived in terms of the absorption coefficient of the incident photons, the minority carrier diffusion length, the built-in electrostatic field appearing in diffused cells, and the surface recombination velocity in the exposed layer of the cell. Although the expressions derived may be used for all semiconducting p-n cells, special efforts have been made in the analysis and computations of the germanium p-n cell. The germanium cells show a great potential for photovoltaic energy conversion from radiant sources other than the sun. The results for germanium indicate that the quantum efficiency strongly depends upon the thicknesses of the exposed and base layers. The built-in electrostatic field and the surface recombination velocity in the exposed layer influence the quantum efficiency greatly. Optimization studies for the thicknesses of the exposed and base layers of an n-p type germanium for different values of minority carrier diffusion length, built-in electrostatic field, and surface recombination velocity have been worked out.     

PWM full-bridge converter with natural input power factor correction

A pulsewidth modulated (PWM) full-bridge converter that simultaneously performs input power factor correction (PFC) and DC-DC conversion is proposed. The converter is the same as the standard voltage-fed PWM full-bridge converter with a diode-bridge low-pass filter front end, but with a slight modification that results in an improvement in power factor that is sufficient to satisfy the EN61000-3-2 requirements for electrical equipment. The operation of the converter is explained and analyzed, and the results of the analysis are used to determine the converter's steady-state characteristics, which are discussed in detail. A design procedure for the selection of components is then derived and demonstrated with an example. The feasibility of the converter and its ability to satisfy EN61000-3-2 requirements on electrical equipment is shown with results obtained from an experimental prototype.     

Dynamic imaging and RCS measurements of aircraft

Results on radar cross section (RCS) measurements and inverse synthetic aperture radar images of a Mooney 231 aircraft using a ground-to-air measurement system (GTAMS) and a KC-135 airplane using an airborne radar are presented. The Mooney 231 flew in a controlled path in both clockwise and counterclockwise orbits, and successively with the gear down, flaps in the take-off position and with the speed brakes up. The data indicates that RCS pattern measurements from both ground-based and airborne radar of flying aircraft are useful and that the inverse synthetic aperture radar (ISAR) images obtained are valuable for signature diagnostics     

Homologous flare–CME events and their metric type II radio burst association

Active region NOAA 11158 produced many flares during its disk passage. At least two of these flares can be considered as homologous: the C6.6 flare at 06:51 UT and C9.4 flare at 12:41 UT on February 14, 2011. Both flares occurred at the same location (eastern edge of the active region) and have a similar decay of the GOES soft X-ray light curve. The associated coronal mass ejections (CMEs) were slow (334 and 337 km/s) and of similar apparent widths (43° and 44°), but they had different radio signatures. The second event was associated with a metric type II burst while the first one was not. The COR1 coronagraphs on board the STEREO spacecraft clearly show that the second CME propagated into the preceding CME that occurred 50 min before. These observations suggest that CME–CME interaction might be a key process in exciting the type II radio emission by slow CMEs.     

Height of shock formation in the solar corona inferred from observations of type II radio bursts and coronal mass ejections

Employing coronagraphic and EUV observations close to the solar surface made by the Solar Terrestrial Relations Observatory (STEREO) mission, we determined the heliocentric distance of coronal mass ejections (CMEs) at the starting time of associated metric type II bursts. We used the wave diameter and leading edge methods and measured the CME heights for a set of 32 metric type II bursts from solar cycle 24. We minimized the projection effects by making the measurements from a view that is roughly orthogonal to the direction of the ejection. We also chose image frames close to the onset times of the type II bursts, so no extrapolation was necessary. We found that the CMEs were located in the heliocentric distance range from 1.20 to 1.93 solar radii (Rs), with mean and median values of 1.43 and 1.38 Rs, respectively. We conclusively find that the shock formation can occur at heights substantially below 1.5 Rs. In a few cases, the CME height at type II onset was close to 2 Rs. In these cases, the starting frequency of the type II bursts was very low, in the range 25–40 MHz, which confirms that the shock can also form at larger heights. The starting frequencies of metric type II bursts have a weak correlation with the measured CME/shock heights and are consistent with the rapid decline of density with height in the inner corona.     

An optimal selection of probability distribution functions for unsupervised land cover classification of PALSAR-2 data

Different types of classification techniques are available in the literature for the classification of Synthetic Aperture Radar (SAR) data into various land cover classes. Various SAR images are available for land cover classification such as ALOS PALSAR (PALSAR-1, PALSAR-2), RADARSAT and ENVISAT. In this paper, we have attempted to explore probability distribution function (pdf) based land cover classification using PALSAR-2 data. Over 20 different statistical distribution functions are analyzed for different classes based on statistical parameters. Probability distribution functions are selected based on Chi-squared goodness of fit test for each individual class. A decision tree based classifier is developed for classification based on the selected pdf functions and its statistical parameters. The proposed classification approach has an accuracy of 83.93%.     

Digital Communication Systems in Impulsive Atmospheric Radio Noise

Analyses are presented of the performance of binary and M-ary coherent and noncoherent communication systems operating in the impulsive atmospheric radio noise environment. The receiver is usually a maximum likelihood detector for white Gaussian interference and therefore has the form of a parallel bank of matched filters followed by decision circuitry. By employing a Poisson or generalized Shot noise model for the impulsive noise with a suitable probability density function (pdf), closed-form expressions and bounds of error probabilities for M-ary noncoherent and coherent amplitude-shift keying (ASK), phase-shift keying (PSK), and frequency-shift keying (FSK) systems are obtained and the results discussed.