Diagnosing the Neutral Interstellar Gas Flow at 1 AU with IBEX-Lo

Every year in fall and spring the Interstellar Boundary Explorer (IBEX) will observe directly the interstellar gas flow at 1 AU over periods of several months. The IBEX-Lo sensor employs a powerful triple time-of-flight mass spectrometer. It can distinguish and image the O and He flow distributions in the northern fall and spring, making use of sensor viewing perpendicular to the Sun-pointing spin axis. To effectively image the narrow flow distributions IBEX-Lo has a high angular resolution quadrant in its collimator. This quadrant is employed selectively for the interstellar gas flow viewing in the spring by electrostatically shutting off the remainder of the aperture. The operational scenarios, the expected data, and the necessary modeling to extract the interstellar parameters and the conditions in the heliospheric boundary are described. The combination of two key interstellar species will facilitate a direct comparison of the pristine interstellar flow, represented by He, which has not been altered in the heliospheric boundary region, with a flow that is processed in the outer heliosheath, represented by O. The O flow distribution consists of a depleted pristine component and decelerated and heated neutrals. Extracting the latter so-called secondary component of interstellar neutrals will provide quantitative constraints for several important parameters of the heliosheath interaction in current global heliospheric models. Finding the fraction and width of the secondary component yields an independent value for the global filtration factor of species, such as O and H. Thus far filtration can only be inferred, barring observations in the local interstellar cloud proper. The direction of the secondary component will provide independent information on the interstellar magnetic field strength and orientation, which has been inferred from SOHO SWAN Ly-α backscattering observations and the two Voyager crossings of the termination shock.     

Analysis of satellite systems for the periodic survey of the Earth

Satellite systems for the periodic survey of a given range of the Earth’s latitudes have been analyzed. As a rule, the efficiency of the satellite systems is estimated based on the maximum interruption, i.e., the maximum time interval that appears when surveying. However, this performance cannot serve as a full criterion for the quality of the survey, since it does not reflect all survey interruptions with their frequencies. To adequately analyze the operation of the satellite system, it is necessary to use the frequency distribution function of the survey interruptions; its determination is a complex problem and has not yet been solved in the general case. In this paper, we propose a method for calculating the set of all interruptions and frequencies suitable for any multisatellite systems with an arbitrary structure. The method is based on the vector model of the Earth’s survey. To estimate the efficiency of the satellite system operation, a complex criterion has been recommended that takes into account all survey interruptions and their frequencies. Two examples of the application of the developed method have been presented.     

IBEX Backgrounds and Signal-to-Noise Ratio

The Interstellar Boundary Explorer (IBEX) mission will provide maps of energetic neutral atoms (ENAs) originating from the boundary region of our heliosphere. On IBEX there are two sensors, IBEX-Lo and IBEX-Hi, covering the energy ranges from 10 to 2000 eV and from 300 to 6000 eV, respectively. The expected ENA signals at 1 AU are low, therefore both sensors feature large geometric factors. In addition, special attention has to be paid to the various sources of background that may interfere with our measurement. Because IBEX orbits the Earth, ion, electron, and ENA populations of the Earth’s magnetosphere are prime background sources. Another potential background source is the magnetosheath and the solar wind plasma when the spacecraft is outside the magnetosphere. UV light from the night sky and the geocorona have to be considered as background sources as well. Finally background sources within each of the sensors must be examined.     

Variability of organic material in surface horizons of the hyper-arid Mars-like soils of the Atacama Desert

The objective of this work was to investigate the variability of surface organic carbon within the hyper-arid Yungay region of the Atacama Desert. The fraction of Labile Organic Carbon (LOC) in these samples varied from 2 to 73 μg per gram of soil with a bi-modal distribution with average content of 17 ± 9 μg LOC and 69 ± 3 μg LOC for “low” and “high” samples, respectively. Interestingly, there was no relation between organic levels and geomorphologic shapes. While organics are deposited and distributed in these soils via eolic processes, it is suggested that fog is the dynamic mechanism that is responsible for the variability and peaks in organic carbon throughout the area, where a “high” LOC content sample could be indicative of a biological process. It was determined that there was no significant difference between topological feature or geographical position within the hyper-arid samples and LOC. This very curious result has implications for the investigation of run-off gullies on the planet Mars as our work suggests a need for careful consideration of the expectation of increases in concentrations of organic materials associated with following aqueous altered topology.     

A culture-independent survey of the bacterial community in a radon hot spring

Paralana is an active, radon-containing hot spring situated in a region of South Australia's Flinders Ranges with a long history of hydrothermal activity. Our aim was to determine the bacterial composition of Paralana using a culture-independent, 16S rRNA-based technique. The presence of a diverse bacterial community was strongly suggested by the large number (approximately 180) of different ribotypes obtained upon analysis of nine hot spring samples. DNA sequencing of Paralana 16S rRNA genes corroborated this observation, identifying representatives of seven confirmed and two candidate divisions of the domain Bacteria. These included Cyanobacteria, Proteobacteria (both beta and delta subdivisions), the Cytophaga-Flexibacter-Bacteroides group, Low G + C Gram-positives, Nitrospira, green non-sulfur bacteria, green sulfur bacteria, OP8, and OP12. No known ionizing radiation-resistant Bacteria were identified. Only one Paralana 16S rRNA sequence type (recombinant B5D) was homologous to a sequence previously identified from a radioactive environment.     

The IBEX-Lo Sensor

The IBEX-Lo sensor covers the low-energy heliospheric neutral atom spectrum from 0.01 to 2 keV. It shares significant energy overlap and an overall design philosophy with the IBEX-Hi sensor. Both sensors are large geometric factor, single pixel cameras that maximize the relatively weak heliospheric neutral signal while effectively eliminating ion, electron, and UV background sources. The IBEX-Lo sensor is divided into four major subsystems. The entrance subsystem includes an annular collimator that collimates neutrals to approximately 7°×7° in three 90° sectors and approximately 3.5°×3.5° in the fourth 90° sector (called the high angular resolution sector). A fraction of the interstellar neutrals and heliospheric neutrals that pass through the collimator are converted to negative ions in the ENA to ion conversion subsystem. The neutrals are converted on a high yield, inert, diamond-like carbon conversion surface. Negative ions from the conversion surface are accelerated into an electrostatic analyzer (ESA), which sets the energy passband for the sensor. Finally, negative ions exit the ESA, are post-accelerated to 16 kV, and then are analyzed in a time-of-flight (TOF) mass spectrometer. This triple-coincidence, TOF subsystem effectively rejects random background while maintaining high detection efficiency for negative ions. Mass analysis distinguishes heliospheric hydrogen from interstellar helium and oxygen. In normal sensor operations, eight energy steps are sampled on a 2-spin per energy step cadence so that the full energy range is covered in 16 spacecraft spins. Each year in the spring and fall, the sensor is operated in a special interstellar oxygen and helium mode during part of the spacecraft spin. In the spring, this mode includes electrostatic shutoff of the low resolution (7°×7°) quadrants of the collimator so that the interstellar neutrals are detected with 3.5°×3.5° angular resolution. These high angular resolution data are combined with star positions determined from a dedicated star sensor to measure the relative flow difference between filtered and unfiltered interstellar oxygen. At the end of 6 months of operation, full sky maps of heliospheric neutral hydrogen from 0.01 to 2 keV in 8 energy steps are accumulated. These data, similar sky maps from IBEX-Hi, and the first observations of interstellar neutral oxygen will answer the four key science questions of the IBEX mission.     

The Interstellar Boundary Explorer High Energy (IBEX-Hi) Neutral Atom Imager

The IBEX-Hi Neutral Atom Imager of the Interstellar Boundary Explorer (IBEX) mission is designed to measure energetic neutral atoms (ENAs) originating from the interaction region between the heliosphere and the local interstellar medium (LISM). These ENAs are plasma ions that have been heated in the interaction region and neutralized by charge exchange with the cold neutral atoms of the LISM that freely flow through the interaction region. IBEX-Hi is a single pixel ENA imager that covers the ENA spectral range from 0.38 to 6 keV and shares significant energy overlap and overall design philosophy with the IBEX-Lo sensor. Because of the anticipated low flux of these ENAs at 1 AU, the sensor has a large geometric factor and incorporates numerous techniques to minimize noise and backgrounds. The IBEX-Hi sensor has a field-of-view (FOV) of 6.5°×6.5° FWHM, and a 6.5°×360° swath of the sky is imaged over each spacecraft spin. IBEX-Hi utilizes an ultrathin carbon foil to ionize ENAs in order to measure their energy by subsequent electrostatic analysis. A multiple coincidence detection scheme using channel electron multiplier (CEM) detectors enables reliable detection of ENAs in the presence of substantial noise. During normal operation, the sensor steps through six energy steps every 12 spacecraft spins. Over a single IBEX orbit of about 8 days, a single 6.5°×360° swath of the sky is viewed, and re-pointing of the spin axis toward the Sun near perigee of each IBEX orbit moves the ecliptic longitude by about 8° every orbit such that a full sky map is acquired every six months. These global maps, covering the spectral range of IBEX-Hi and coupled to the IBEX-Lo maps at lower and overlapping energies, will answer fundamental questions about the structure and dynamics of the interaction region between the heliosphere and the LISM.