Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

Application of crop gas exchange and transpiration data obtained with CEEF to global change problem.

In order to predict carbon sequestration of vegetation with the future rise in atmospheric CO2 concentration, [CO2] and temperature, long term effects of high [CO2] and high temperature on responses of both photosynthesis and transpiration of plants as a whole community to environmental parameters need to be elucidated. Especially in the last decade, many studies on photosynthetic acclimation to elevated [CO2] at gene, cell, tissue or leaf level for only vegetative growth phase (i.e. before formation of reproductive organs) have been conducted all over the world. However, CO2 acclimation studies at population or community level for a whole growing season are thus far very rare. Data obtained from repeatable experiments at population or community level for a whole growing season are necessary for modeling carbon sequestration of a plant community. On the other hand, in order to stabilize material circulation in the artificial ecological system of Closed Ecology Experiment Facilities (CEEF), it is necessary to predict material exchange rates in the biological systems. In particular, the material exchange rate in higher plant systems is highly variable during growth periods and there is a strong dependence on environmental conditions. For this reason, dependencies of both CO2 exchange rate and transpiration rate of three rice populations grown from seed under differing conditions of [CO2] and day/night air temperature (350 microL CO2 L-1, 24/17 degrees C (population A); 700 microL CO2 L-1, 24/17 degrees C (population B) and 700 microL CO2 L-1, 26/19 degrees C (population C)) upon PPFD, leaf temperature and [CO2] were investigated every two weeks during whole growing season. Growth of leaf lamina, leaf sheath, panicle and root was also compared. From this experiment, it was elucidated that acclimation of instantaneous photosynthetic response of rice population to [CO2] occurs in vegetative phase through changes in ratio of leaf area to whole plant dry weight, LAR. But, in reproductive growth phase (i.e. after initiation of panicle formation), the difference between photosynthetic response to [CO2] of population A and that of population B decreased. Although LAR of population C was almost always less than that of population A, there was no difference between the photosynthetic response to [CO2] of population A at 24 degrees C and that of population C at 26 degrees C for its whole growth period. These results are useful to make a model to predict carbon sequestration of rice community, which is an important type of vegetation especially in Asia in future global environmental change.     

Association of optical tracklets from a geosynchronous belt survey via the direct Bayesian admissible region approach

The direct Bayesian admissible region approach is an a priori state free measurement association and initial orbit determination technique for optical tracks. In this paper, we test a hybrid approach that appends a least squares estimator to the direct Bayesian method on measurements taken at the Zimmerwald Observatory of the Astronomical Institute at the University of Bern. Over half of the association pairs agreed with conventional geometric track correlation and least squares techniques. The remaining pairs cast light on the fundamental limits of conducting tracklet association based solely on dynamical and geometrical information.     

Current status of X-ray spectrometer development in the SELENE project

The X-ray spectrometer (XRS) on the SELENE (SELenological and ENgineering Explorer) spacecraft, XRS, will observe fluorescent X-rays from the lunar surface. The energy of the fluorescent X-ray depends on the elements of which the lunar soil consists, therefore we can determine elemental composition of the upper most lunar surface. The XRS consists of three components: XRF-A, SOL-B, and SOL-C. XRF-A is the main sensor to observe X-rays from the lunar surface. SOL-B is direct monitor of Solar X-ray using Si-PIN photodiode. SOL-C is another Solar X-ray monitor but observes the X-rays from the standard sample attached on the base plate. This enables us to analyze by a comparative method similar to typical laboratory XRF methods. XRF-A and SOL-C adopt charge coupled device as an X-ray detector which depletion layer is deep enough to detect X-rays. The X-ray spectra were obtained by the flight model of XRS components, and all components has been worked well to analyze fluorescent X-rays. Currently, development of the hardware and software of the XRS has been finished and we are preparing for system integration test for the launch.     

Polarization model for discrimination of broad and needle shaped leaves and estimation of LAI using polarization measurements

Method for estimation of Leaf Area Index (LAI) based on polarized radiance measurements is proposed. Leaf angle dependency on LAI estimation can be taken into account by considering polarization characteristics of leaves. Effectiveness of the proposed method is confirmed with the polarized radiance from tealeaves and the other needle leaf types of grasses. Convenient way to monitor quality and amount of leaves with network camera with polarization film is also proposed.     

Analysis of nitrogen flow in rice cultivation in CEEF.

In order to control the material circulation in the Closed Ecology Experiment Facilities (CEEF), it is necessary to clarify material flow in the Closed Plant Experiment Facility (CPEF) of CEEF. We tried to grow rice plants and measure the nitrogen contents in rice plant and nutrient solution in plant cultivation bed to trace the material balance in CPEF. The measurements were carried out under the condition of 750 ppm (v/v) CO2 at 26/19 degrees C in the plant cultivation room. The measurements showed the absorbed nitrogen amount in plant was less than the outflow nitrogen amount from nutrient solution. This difference between absorbed and outflow quantity reached to 17%.     

Nonlinear mixture model of mixed pixels in remote sensing satellite images based on Monte Carlo simulation

A nonlinear mixture model for the interpretation of mixed pixels in remote sensing satellite images is proposed. The proposed model is a Monte Carlo ray-tracing model that takes into account interactions among the ground cover materials (multiple reflections among the materials on the surface). The proposed model also takes into account topographic features (slope) of the ground surface. As an example, Top of the Atmosphere (TOA) radiance of mixed pixels of forested areas which are composed of grasses and trees are simulated with the proposed model and compared to actual remote sensing satellite data of ASTER/VNIR over these forested areas. It was found that the influence due to multiple scattering interactions between trees depends on the tree distance and ranges from 8% to 10%. It is also found that the proposed model is useful to interpret mixed pixels. Namely, it is suggested that actual reflectance of the trees is higher than apparent reflectance that is calculated with the satellite data. Also it is suggested that it is possible to estimate forest parameters such as tree distance, tree shape.     

Bright band height assignment with precipitation radar data based on multi-resolution analysis (MRA) of wavelet analysis

A method for reconstruction of cross-section of rainfall situations with precipitation radar data based on wavelet analysis of multi-resolution analysis (MRA) which allows extract a peak of the radar reflectivity is proposed in order to detect bright band height. It is found that the bright band height can be estimated by using the MRA with the basis of Daubechies wavelet family. It is also found that the boundaries in rainfall structure can be clearly extracted with MRA.     

Sensitivity analysis for air temperature profile estimation methods around the tropopause using simulated Aqua/AIRS data

A sensitivity analysis is performed to investigate potential improvements to the accuracy of air temperature profile retrievals near the tropopause. A simple inversion method is employed to identify and remove redundant spectral channels from the retrievals using simulated data for the high-spectral resolution sounder AIRS (Atmospheric Infrared Sounder) on the Aqua satellite. Bayesian optimal theory and inverse technique are applied for the atmospheric temperature profile retrievals, and the 15 μm CO₂ absorption bands (620–750 cm⁻¹) are chosen for this study. Sequentially elimination of redundant channels is directly integrated into the inverse scheme for the temperature profile, in order to accurately retain the valuable channels and remove all the redundant channels, for accurate retrieval of the temperature profile. Also, the tropopause and troposphere are treated differently in the inverse scheme to improve the retrieval accuracy in the tropopause. Results of a sensitivity analysis based on this method, for the Tropical and Middle-Latitude Summer models simulated by MODTRAN4.0, show that the estimated accuracies are improved by 2 K around the tropopause, and are only changed by less than 0.2 K in the troposphere.     

Unmixing method for hyperspectral data based on sub-space method with learning process

An unmixing method for hyperspectral Earth observation satellite imagery data is proposed. It is based on a sub-space method with learning process. The proposed method utilizes a sub-space for feature space during unmixing. It is used to be done in a feature space which consists of spectral bands of observation vectors. As the results from the experiments with airborne based hyperspectral imagery data, AVIRIS, it is found that the proposed unmixing is superior to the other existing method in terms of decomposition accuracy and the process time required for the decompositions.