Excavation of artificial caverns inside asteroids by leveraging rotational self-energy

Future space ventures will likely require exploitation of near-Earth asteroid resources. Moreover, it can be envisaged that asteroids may host habitats in their interiors. In fact, a cavern inside an asteroid would be a natural radiation shield against cosmic radiation and may also serve as a confined environment for storage of mined material such as water ice or other processed volatiles such as propellants. To this end, this paper proposes to leverage the asteroid rotational self-energy to remove material from the asteroid interiors and create a spherical cavern, by means of the orbital siphon concept. The siphon is a chain of tether-connected payload masses (the asteroid material), which exploits the rotation of the asteroid for the delivery of mass from the asteroid to escape. Under certain conditions the siphon can be initiated to ensure self-sustained flow of mass from the asteroid to escape. A net orbital siphon effect is generated by connecting new payloads at the bottom of the chain while releasing the upper payloads. Key parameters are discussed, such as the required siphon dimension and the maximum size of the internal cavity that can be excavated, as a function of the asteroid rotational period. Moreover, assuming elastic material behaviour, a closed-form expression for the stress tensor is found and a failure criterion is used to identify regions in the asteroid interiors subjected to the larger stresses. It is shown that the conditions for failure are relaxed as the radius of the internal void increases.     

纤维织物超高速碰撞热-力学模型与分析

A new thermo mechanical model for fiber fabric of hypervelocity impact is established by using the Johnson Cook model, the Gruneisen equation of state and the FEM SPH coupling algorithm, while some new factors are taken into account such as the heat generation, strain rate strengthening and high temperature softening of materials. Mechanical and thermal information could be obtained with the model, such as penetration, fragmentation, stress and strain, heat generation and temperature field of fiber fabric. The analysis results are in good agreement with the experimental results.     

一种用于深空探测的Chirp变换频谱分析仪设计与实现

根据深空探测对频谱分析仪抗辐射、高分辨率、低功耗的需求，研究一种基于Chirp变换的高分辨率频谱分析仪设计及其实现.利用中心频率为1GHz、带宽为400MHz、色散时间为10μs的声表面波滤波器，提出了一种模拟和数字相结合的高分辨率频谱分析仪设计方案，并搭建原理实验系统完成了实测验证，其分析带宽为400MHz，频率分辨率达到152kHz，功耗约为3.6W.分析了压缩线器件非理想特性对频率分辨率的影响，利用实测压缩线频率响应特性获得幅度和相位补偿曲线，对展宽线信号进行幅相失配补偿.仿真结果表明，该补偿方法可将频率分辨率提高至108kHz.      

主辅拦截器协同制导方法研究

随着现代导弹技术的发展,导弹的突防能力越来越强,对导弹的防御难度也逐渐增大。为增强拦截器的杀伤力并降低成本,可利用主辅拦截器协同制导对目标进行拦截。建立了拦截器与目标的相对运动模型,通过对运动方程进行线性化分析,发现协同制导问题实质为具有终端时间限制条件的导引问题,该问题可转化为线性化系统的最优控制问题。利用最优控制中的极小值原理设计了时间协同制导律。仿真结果表明:该制导律可实现多枚拦截器在同一时刻拦截目标的协同制导要求。     

一种适用于封闭场景下的遥测信号接收方法

常规的遥测信号接收多是在开阔场景进行,被测对象除了在起飞或降落时短暂低仰角,大部分时间其信号是视距传输,其遥测信道近似于高斯白噪声信道。随着遥测应用场景的逐步扩展,封闭场景下的遥测需求逐步被提出,应用模式和信道条件发生了巨大变化。针对某封闭场景,分析常规遥测接收方法存在的一些问题,提出一种双天线加盲均衡的分集合成和接力接收方案,有效解决了封闭场景下的遥测信号中断问题。方案成功应用于某测试系统,实测结果表明,方案能够极大提升遥测系统的健壮性。     

脉冲电流大厚度电解线切割加工试验

航空航天难加工材料直纹面构件的高精度高表面完整性加工已经成为制造领域普遍关注和亟需解决的难题，电解线切割加工在高表面完整性要求加工场合上具有原理性优势。建立脉冲电流电解线切割加工模型，分析了工件厚度变化带来的影响。试验结果表明：随着工件厚度增加，电解液电阻减小，工件两端极间电压减小，加工缝宽变窄；双电层时间常数增大，脉宽时间内充电所能达到的电位降低，有效加工时间变短，平均电流密度较低；脉冲频率大于20 kHz时，最大进给速度随频率增加而快速减小，低于20 kHz时，最大加工速度差别较小。最后，采用脉冲频率20 kHz，以进给速度4 μm/s稳定加工出20 mm厚榫头/榫槽结构，表面粗糙度约为0.449 4 μm，表面质量、加工效率明显高于100 kHz加工效果。     

Full characterization of a compact 90Sr/90Y beta source for TID radiation testing

A new methodology for Total Ionizing Dose (TID) tests is proposed. It is based on the employment of an on-chip ⁹⁰Sr/⁹⁰Y beta source as alternative to standard methods such as ⁶⁰Co gamma rays and electrons from LINAC. The use of a compact beta source for TID tests has several advantages. In particular, the irradiation of devices with more than one radiation source results in a better representation of the complex space radiation environment composed of several types, energies and dose-rates. In addition, the use of an easy handling beta source allows the irradiation of electronic devices without any damage to other auxiliary circuit. In this work, ⁹⁰Sr/⁹⁰Y beta source dosimetry and related radiation field characteristics are discussed in depth.In order to validate the proposed source for TID tests, a rather complex device such as the “SPC56EL70L5” microcontroller from ST-Microelectronics was exposed to ⁹⁰Sr/⁹⁰Y beta rays. The results of this test were compared to that of a previous test of another sample from the same lot with a standard gamma ⁶⁰Co source. The electronic performances following the two irradiations have been found to be in excellent agreement, by demonstrating therefore the validity of the proposed beta source for TID tests.     

粗糙表面偏振二向反射分布函数的影响参数及其反演

针对目标偏振二向反射特性研究中模型参数难以准确确定的问题,分析了粗糙表面偏振二向反射分布函数的影响参数,并通过理论推导和仿真计算,研究了各参数对粗糙表面散射特性的作用机理。总结分析了现有参数反演方法,针对现有方法存在的理论缺陷,在P-G(Preist-Germer)模型的基础上,提出了利用"相对偏振分量-角度"的相关关系进行参数反演的方法,设计了参数反演算法,进行了标准反射板和绿漆表面的偏振二向反射特性测试实验,并根据实验数据进行了参数反演和模型验证。实验结果表明,改进的参数反演方法可准确反演所有模型参数。利用反演参数进行模型验证,结果显示模型预测数据与实验数据具有较好的吻合度,验证了模型的准确性。     

不同接触形式下轮盘叶片系统的振动响应分析

以某压气机盘片系统为研究对象,基于ANSYS软件,建立了接触模型、接触不分离模型和刚性连接模型3种榫连结构接触约束形式下的盘片有限元模型,分别对3种模型进行了固有特性的分析,对比了三者的共振频率和振型;在离心力和气流激振力作用下,对3种模型进行了振动响应分析,得到三者的位移响应和应力随转速的变化规律。研究结果表明:接触模型和接触不分离模型的固有特性一致性较好,而刚性连接模型和接触模型在高频段存在较大差异。同时,刚性连接模型和接触不分离模型能够极大地改善接触模型在低转速下的收敛性。